• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.38-44
• /
• 2001

An efficient Gauss-Seidel time integration scheme is developed for solving the Euler and Navier-Stokes equations on unstructured meshes. Roe's FDS is used for the explicit residual computations and van Leer's FVS for evaluating implicit flux Jacobian. To reduce the memory requirement to a minimum level, off-diagonal flux Jacobian contributions are repeatedly calculated during the Gauss-Seidel sub-iteration process. Computational results based on the present scheme show that approximately $15\%$ of CPU time reduction is achieved while maintaining the memory requirement level to $50-60\%$ of the original Gauss-Seidel scheme.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2922-2931
• /
• 1994

We propose a modified 6-node element, where the sampling point of Gauss quadrature moved in the thickness direction. The modified 6-node element has been applied to static problems and forced motion analyses. In this study, this method is extended to the finite element analysis of the natural frequencies of two dimensional problems. We also propose a modified 16-node element for three dimensional problems, which behaves much like a 20-node element with smaller degree of freedom. The modified 6-node and 16-node elements have been applied to the modal analyses of beams and plates, respectively. The results agree well with the results of the 8-node or 20-node element models.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.219-224
• /
• 2015

전기 임피던스 단층촬영 기법은 전극들을 통해 전류를 주입하고 이에 유기되는 전압을 측정한 후, 이들 데이터를 기반으로 내부의 도전율 분포를 영상으로 복원하는 방법이다. 이 논문에서는 기존의 Gauss-Newton 방법의 역행렬 항목의 차원을 도메인의 원소의 개수가 아닌 데이터의 개수의 차원으로 바꿔줌으로써, 관심 도메인 내부의 도전율 분포를 보다 빠르게 추정할 수 있는 방법을 제안하였다. 그리고 자코비안 행렬의 대각성분의 최소-최대를 이용하여 조정인자를 계산하는 방법을 함께 제안하였다. 몇 가지 시나리오를 설정하고 모의실험을 통해 제안한 방법의 복원 성능을 비교분석하였다.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.642-651
• /
• 1988

본 연구에서는 정적 혹은 동적인 하중을 받는 탄성체의 변위, 응력 등을 구할 수 있는 유한요소해석을 하였다. 이 경우에 얻어지는 대수적인 운동방정식은 비선형 적이지만 증분응력이 미소한 경우에는 선형화될 수 있다.따라서 유한요소식의 해법 도 선형적인 경우와 비선형적인 경우로 나누어 생각한다.선형문제에 대한 해법으로 는 (1) 정하중:Gauss소거법, (2) 동하중:모우드에 대한 해석 또는 Newmark의 직접적분 법을 사용했고, 비선형적인 문제에 대한 해법으로는 (1) 정하중:Newton-Raphson반복법, (2) 동하중 :Newton-Raphson 반복법에 의거한 Newmark의 직접적분법을 사용하였다. 비선형적인 문제의 풀이시에는 Newton-Raphson방법으로 반복하여 계산하면서 외력과 등가절점하중의 평형이 이루어지도록 하므로 상당히 많은 양의 계산이 필요한데, 이때 서로 종류가 다른 강성매트릭스의 수치적분시 각기 다른 차수의 Gauss-Legendre 적분 을 시도하여, 발생된 오차 및 계산시간의 변동 등을 고찰하므로써 계산량의 감소방안 을 찾아 보았다. 또한 초기응력이 균일한 경우, 선형해와 비선형해를 비교함으로써 증분응력의 영향을 무시하는 선형해석의 적용타당성을 검토하였다.

• 대한토목학회논문집
• /
• 제11권3호
• /
• pp.47-58
• /
• 1991

본 논문에서는 무한요소를 이용한 지반-구조물 상호작용 해석에 대하여 연구하였다. 적층지반(Layered Soil)과 같이 여러 가지 응력파가 동시에 전파되는 탄성지반의 외부영역을 효과적으로 모형화할 수 있는 동적무한요소를 개발하였으며, 요소행렬 구성시 수반되는 무한대 방향으로의 적분을 효과적으로 수행하기 위하여 Gauss-Laguerre 적분방법을 기초로 하여 새로이 고안된 적분방법을 제시하였다. 이 방법의 타당성은 반무한 탄성지반과 적층된 반무한 탄성지반 위에 놓여 있는 원형강판의 임피던스(Impedance) 함수를 구하여 해석적으로 구한 값들과 비교함으로써 검토하였다.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.81-87
• /
• 2004

This paper deals with a new approach to tolerance optimization problems. Optimal tolerance allotment problems can be formulated as stochastic optimization problems. Most schemes to solve the stochastic optimization problems have been found to exhibit difficulties in multivariate integration of the probability density function. As a typical example of stochastic optimization the optimal tolerance allotment problem has the same difficulties. In this stochastic model, manufacturing system is represented by Gauss-Markov stochastic process and the manufacturing unit availability is characterized for realistic optimization modeling. The new algorithm performed robustly for a large deviation approximation. A significant reduction in computation time was observed compared to the results obtained in previous studies.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.538-544
• /
• 2003

Although many methodologies exist for determining the constrained equations of motion, most of these methods depend on numerical approaches such as the Lagrange multiplier's method expressed in differential/algebraic systems. In 1992, Udwadia and Kalaba proposed explicit equations of motion for constrained systems based on Gauss's principle and elementary linear algebra without any multipliers or complicated intermediate processes. The generalized inverse method was the first work to present explicit equations of motion for constrained systems. However, numerical integration results of the equation of motion gradually veer away from the constraint equations with time. Thus, an objective of this study is to provide a numerical integration scheme, which modifies the generalized inverse method to reduce the errors. The modified equations of motion for constrained systems include the position constraints of index 3 systems and their first derivatives with respect to time in addition to their second derivatives with respect to time. The effectiveness of the proposed method is illustrated by numerical examples.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2640-2652
• /
• 1994

The stiffness of 6-node isotropic element is stiffer than that of 8-node isotropic element of same configuration. This phenomenon was called 'Relative Stiffness Stiffening Phenomenon'. In this paper, an equation of sampling point modification which correct this phenomenon was derived for the composite plate, as well as an equation for an isotropic plate. The relative stiffness stiffening phenomena of an isotropic plate element could be corrected by modifying Gauss sampling points in the numerical integration of stiffness matrix. This technique could also be successfully applied to the static analyses of composite plate modeled by the 3-dimensional 16-node elements. We predicted theoretical errors of stiffness versus the number of layers that result from the reduction of numerical integration order. These errors coincide very well with the actual errors of stiffness. Therefore, we can choose full integration of reduced integration based upon the permissible error criterion and the number of layers by using the thoretically predicted error.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.990-1004
• /
• 1995

A modified 16-node element for composite plate has been proposed and compared with the 20-node element to check the validity of it. The fields of numerical inspection include mode analysis and specific damping analysis. By symetrizing the conventional unsymmetric damping matrix in the analysis of specific damping capacity, we could compute the specific damping capacity and make a program, effectively. In addition, we could predict the errors caused by reduction of integration order in thickness direction depending upon the number of layers.

• 전산구조공학
• /
• 제10권2호
• /
• pp.139-148
• /
• 1997

A finite element method is programmed to analyse the nonlinear behavior of axisymmetric structures. The lst order Mindlin shell theory which takes into account the transversal shear deformation is used to formulate a conical two node element with six degrees of freedom. To evade the shear locking phenomenon which arises in Mindlin type element when the effect of shear deformation tends to zero, the reduced integration of one point Gauss Quadrature at the center of element is employed. This method is the Updated Lagrangian formulation which refers the variables to the state of the most recent iteration. The solution is searched by Newton-Raphson iteration method. The tangent matrix of this method is obtained by a finite difference method by perturbating the degrees of freedom with small values. For the moment this program is limited to the analyses of non-linear elastic problems. For structures which could have elastic stability problem, the calculation is controled by displacement.