• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.3
• /
• pp.27-27
• /
• 1987

The purpose of this study is to find the light intensity which induced maximum gathering rate and to observe the variation of the gathering rate both at daytime and night by using Sea-bass, Epinephelus septemfasciatus (Thunberg). An experimental tank (360 L×50 W×55H cm) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Eight artificial light sources were prepared by combination of three with white light bulbs (10W, 60W, 100W) and eight filters. During the experiment water depth was maintained 50cm level in the tank. The tank was marked into six longitudinal sections each being 60cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes before the main experiment. Upon turning on the light, the number of fish in each section was counted 60 times every 30 seconds, and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was 24.13 lux (15.25~35.93 lux) at daytime and 0.41 lux (0.25~0.63 lux) at night. The variation of the gathering rate of fish in illumination time was great and did not show any definite pattern but fluctuated irregularly. Its different between daytime and night is remarkable.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.3
• /
• pp.137-143
• /
• 1987

The purpose of this study is to find the light intensity which induced maximum gathering rate and to observe the variation of the gathering rate both at daytime and night by using Sea-bass, Epinephelus septemfasciatus (Thunberg). An experimental tank (360 L$\times$50 W$\times$55H cm) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Eight artificial light sources were prepared by combination of three with white light bulbs (10W, 60W, 100W) and eight filters. During the experiment water depth was maintained 50cm level in the tank. The tank was marked into six longitudinal sections each being 60cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes before the main experiment. Upon turning on the light, the number of fish in each section was counted 60 times every 30 seconds, and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was 24.13 lux (15.25~35.93 lux) at daytime and 0.41 lux (0.25~0.63 lux) at night. The variation of the gathering rate of fish in illumination time was great and did not show any definite pattern but fluctuated irregularly. Its different between daytime and night is remarkable.

• KOMUNHWA
• /
• no.20
• /
• pp.3-13
• /
• 1982

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.2
• /
• pp.122-129
• /
• 2014

Effective information gathering and retrieval of the most relevant web documents on the topic of interest is difficult due to the large amount of information that exists in various formats. Current information gathering and retrieval techniques are unable to exploit semantic knowledge within documents in the "big data" environment; therefore, they cannot provide precise answers to specific questions. Existing commercial big data analytic platforms are restricted to a single data type; moreover, different big data analytic platforms are effective at processing different data types. Therefore, the development of a common big data platform that is suitable for efficiently processing various data types is needed. Furthermore, users often possess more than one intelligent device. It is therefore important to find an efficient preference profile construction approach to record the user context and personalized applications. In this way, user needs can be tailored according to the user's dynamic interests by tracking all devices owned by the user.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.703-706
• /
• 2004

Grid computing represents the fundamental computing shift from a localized resource computing model to a fully-distributed virtual organization with shared resources. Accounting is one of the main obstacles to widespread adoption of the grid. Accounting has until recently, been a sparsely-addressed problem, particularly in practice. In this paper, we design and implement the accounting information gathering system. Implemented system is based on OGSA, following GSAX framework of RUS-WG in GGF. And the schema of gathered and serviced accounting information is following Usage Record Fields of UR-WG in GGF. Also, the accounting information integrating and monitoring tool for system management in the grid environment are implemented.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.9 no.3
• /
• pp.1-11
• /
• 2010

In the construction industry, IT based information system has been diversely applied to increase productivity. Although IT device such as PDA, RFID, Barcode, wireless network and web camera has been introduced to gather information in construction site, the effect of the IT device is limited, because of bringing about additional works of engineer. In this paper, we proposed a defect management system which is based on handwritten document digitalization framework for introducing applicability of new IT device, digital pen. By the proposed system, we can effectively gather and input defect information to defect management system by using digital pen and paper like conventional way. Applying the data gathering device, digital pen to defect management, it is able to increase productivity by improving work process, building up and utilizing defect information database of good quality.

• The Journal of Korean Physical Therapy
• /
• v.24 no.5
• /
• pp.370-376
• /
• 2012

Purpose: This study examined whether there are differences in cognitive styles between orthopedic and neurological physical therapists, and whether these differences change with clinical experience in clinical reasoning. Methods: A survey study was conducted on 88 orthopedic and neurologic physical therapists working in South Korea. The survey items used by May and Dennis (1991) were translated, and only those items related to data-gathering and information-processing were used. Results: The cognitive style was similar in the orthopedic and neurologic physical therapists, but the clinical experience affected the cognitive styles of clinical reasoning. Physical therapists with more than 60 months clinical experience responded most positively to the preceptive and systematic styles in clinical reasoning. Conclusion: These results suggest that physical therapy education should provide physical therapy students with a clinical reasoning process related specifically to a particular clinical field.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.632-635
• /
• 2004

PCB assembly is a complicated and difficult process to optimize due to the necessity of simultaneous consideration of rack assignment and board mounting sequencing. An efficient component mounting method is developed using component gathering phenomenon. It is found that same components are located closely each other by checking PCBs in field and interviewing PCB designers. A new method counting this phenomenon is developed and it is performed better with more number of total components and more number of gathered components cases. Simulation models are developed using Visual C++ for performance evaluation of the heuristic.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.304-313
• /
• 2013

Wireless Sensor Networks, especially supporting for surveillance service, are one of the core properties of network-centric warfare(NCW) that is a key factor of victory in future battlefields. Such a tactical surveillance sensor network must be designed not just for energy efficiency but for real-time requirements of emergency data transmission towards a control center. This paper proposes efficient clustering-based methods for supporting mobile sinks so that the network lifetime can be extended while emergency data can be served as well. We analyze the performance of the proposed scheme and compare it with other existing schemes through simulation via Qualnet 5.0.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.431-439
• /
• 2007

Data logger is generally needed for gathering field information automatically(or manually), using various sensors. However it, currently used in the county, is produced and developed by overseas. It is difficult to upgrade related program due to developed system and limited user in terms of environment it is used. On the other hand, several companies developed and sold unique data logger based their technique expertise in the country. But enhancement and practical use of related technology has much difficulties because feasibility, marketability and demand for technique are uncertain. In this study, it is the main purpose to offer basic information to select equipment suitable for field characteristic through analysis and comparison with features about method of information collection, operating program and process technique data logger which is used primarily in geotechnical engineering in both domestic and international.