• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.895-900
• /
• 2000

In this paper, C-V characteristics based on the structure of GaAs MESFET’s has been proposed with wide range of applied voltages and temperatures. Small signal capacitance; gate-source and gate-drain capacitances are represented by analytical expressions which are classified into two different regions; linear and saturation regions with bias voltages. The expression contains two variables; the built-in voltage( $V_{vi}$ )and the depletion width(W). Submicron gate length MESFETs has been selected to prove the validity of the theoretical perdiction and shows good agreement with the experimental data over the wide range of applied voltages.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.829-834
• /
• 2014

In this paper, a lateral power metal-oxide-semiconductor field-effect transistor with ultra-low specific on-resistance is proposed to be applied to a high-voltage (up to 200 V) integrated chip. The proposed structure has two characteristics. Firstly, a high level of drift doping concentration can be kept because a tilt-implanted p-drift layer assists in the full depletion of the n-drift region. Secondly, charge imbalance is avoided by an extended trench gate, which suppresses the trench corner effect occurring in the n-drift region and helps achieve a high breakdown voltage (BV). Compared to a conventional trench gate, the simulation result shows a 37.5% decrease in $R_{on.sp}$ and a 16% improvement in BV.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1611-1614
• /
• 2010

The explosion of a nuclear weapon radiates a gamma-ray in the form of a transient pulse. If the gamma-ray introduces to semiconductor devices, much Electron-Hole Pairs(EHPs) are generated in depletion region of the devices[7]. as a consequence of that, high photocurrent is created and causes upset, latchup and burnout of semiconductor devices[8]. This phenomenon is known for Transient Radiation Effects on Electronics(TREE), also called dose-rate effects. In this paper 3D structure of inverter and NAND gate device was designed and transient pulse gamma-ray was modeled. So simulation for transient radiation effect on inverter and NAND gate was accomplished and mechanism for upset and latchup was analyzed.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.359-365
• /
• 2007

In this paper we present a bottom-gate type of zinc oxide (ZnO) and Gallium (Ga) doped zinc oxide (GZO) based thin film transistors (TFTs) through applying a radio frequency (RF) magnetron sputtering method at room temperature. The gate leakage current can be reduced up to several ph by applying $SiO_2$ thermally grown instead of using new gate oxide materials. The root mean square (RMS) values of the ZnO and GZO film surface were measured as 1.07 nm and 1.65 nm, respectively. Also, the transmittances of the ZnO and GZO film were more than 80% and 75%, respectively, and they were changed as their film thickness. The ZnO and GZO film had a wurtzite structure that was arranged well as a (002) orientation. The ZnO TFT had a threshold voltage of 2.5 V, a field effect mobility of $0.027\;cm^2/(V{\cdot}s)$, a on/off ratio of $10^4$, a gate voltage swing of 17 V/decade and it operated in a enhancement mode. In case of the GZO TFT, it operated in a depletion mode with a threshold voltage of -3.4 V, a field effect mobility of $0.023\;cm^2/(V{\cdot}s)$, a on/off ratio of $2{\times}10^4$ and a gate voltage swing of 3.3 V/decade. We successfully demonstrated that the TFTs with the enhancement and depletion mode type can be fabricated by using pure ZnO and 1wt% Ga-doped ZnO.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.4
• /
• pp.148-151
• /
• 2011

We designed and fabricated aluminium gallium nitride (AlGaN)/GaN high electron mobility transistors (HEMTs) with stable reverse blocking characteristics established by employing a selective fluoride plasma treatment on the drainside gate edge region where the electric field is concentrated. Implanted fluoride ions caused a depolarization in the AlGaN layer and introduced an extra depletion region. The overall contour of the depletion region was expanded along the drift region. The expanded depletion region distributed the field more uniformly and reduced the field intensity peak. Through this field modulation, the leakage current was reduced to 9.3 nA and the breakdown voltage ($V_{BR}$) improved from 900 V to 1,400 V.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.35-39
• /
• 2011

An electrically erasable programmable read-only memory (EEPROM) containing a stacked metal-insulator-metal (MIM) and n-well capacitor is proposed. It was fabricated using a 0.18 $\mu$m standard complementary metal-oxide semiconductor process. The depletion capacitance of the n-well region was effectively applied without sacrificing the cell-area and control gate coupling ratio. The device performed very similarly to the MIM capacitor cell regardless of the smaller cell area. This is attributed to the high control gate coupling ratio and capacitance. The erase speed of the proposed EEPROM was faster than that of the cell containing the MIM control gate.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.42-43
• /
• 2002

반도체 디바이스의 발전은 높은 직접화 및 동작 속도를 추구하고 있으며, 이를 위해서 MOSFET의 scale down시 발생되는 문제를 해결해야만 한다. 특히, Channel이 짧아짐으로써 발생하는 device의 열화현상으로 동작전압의 조절이 어려워 짐을 해결해야만 하며, gate oxide 두께를 줄임으로써 억제할 수 있다고 알려져 왔다. 현재, gate oxide으로 사용되고 있는 SiO2박막은 비정질로써 ～8.7 eV의 높은 band gap과 Si기판 위에서 성장이 용이하며 안정하다는 장점이 있으나, 두께가 1.6 nm 이하로 얇아질 경우 전자의 direct Tunneling에 의한 leakage current 증가와 gate impurity인 Boron의 channel로의 확산, 그리고 poly Si gate의 depletion effect[1,2] 등의 문제점으로 더 이상 사용할 수 없게 된다. 2001년 ITRS에 의하면 ASIC제품의 경우 2004년부터 0.9～l.4 nm 이하의 EOT가 요구된다고 발표하였다. 따라서, gate oxide의 물리적인 두께를 증가시켜 전자의 Tunneling을 억제하는 동시에 유전막에 걸리는 capacitance를 크게 할 수 있다는 측면에서 high-k 재료를 적용하기 위한 연구가 진행되고 있다[3]. High-k 재료로 가능성 있는 절연체들로는 A1₂O₃, Y₂O₃, CeO₂, Ta₂O, TiO₂, HfO₂, ZrO₂,STO 그리고 BST등이 있으며, 이들 재료 중 gate oxide에 적용하기 위해 크게 두 가지 측면에서 고려해야 하는데, 첫째, Si과 열역학적으로 안정하여 후속 열처리 공정에서 계면층 형성을 배제하여야 하며 둘째, 일반적으로 high-k 재료들은 유전상수에 반비례하는 band gap을 갖는 것으로 알려줘 있는데 이 Barrier Height에 지수적으로 의존하는 leakage current때문에 절연체의 band gap이 낮아서는 안 된다는 점이다. 최근 20이상의 유전상수와 ～5 eV 이상의 Band Gap을 가지며 Si기판과 열역학적으로 안정한 ZrO₂[4], HfiO₂[5]가 관심을 끌고 있다. HfO₂은 ～30의 고유전상수, ～5.7 eV의 높은 band gap, 실리콘 기판과의 열역학적 안전성 그리고 poly-Si와 호환성등의 장점으로 최근 많이 연구가 진행되고 있다. 또한, Hf은 SiO₂를 환원시켜 HfO₂가 될 수 있으며, 다른 silicide와 다르게 Hf silicide는 쉽게 산화될 수 있는 점이 보고되고 있다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.205-209
• /
• 1991

The conventional modeling equations for planar MOSFET can not be directly used for zero or minus junction depth concave MOSFET. In this paper, we suggest a new model which can simulate the electrical characteristics of concave MOSFET. The threshold voltage modeling was achieved using the charge sharing method considering the relative difference of source and drain depletion widths. To analyze the ID-VDS characteristics, the conventional expressions for planar MOSFET were employed with the electrical channel length as an effective channel length and the channel length modulation factor as ${\alpha}$ΔL. By comparing the proposed model with experimental results, we could get reasonably similar curves and we proposed a concave MOSFET conditiion which shows no short channel effect of threshold voltage(V${\gamma}$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1284-1287
• /
• 2005

Peripheral pentacene region gives a significant influence on C-V characteristics of metal-oxide-pentacene capacitor structure. When the gate voltage goes toward negative, the effect of peripheral pentacene region becomes larger. Remaining gate DC bias constant and changing small signal frequency, the capacitance of peripheral pentacene changes along with frequency so that the total capacitance value also changes. The influence of peripheral pentacene region should be removed to measure accurate C-V characteristics, because it is hard to take into account the effect of the region quantitatively. After removing the influence of peripheral pentacene region, acceptor concentration, flat band voltage and depletion width of pentacene thin film are extracted from an accurate C-V curve as $1.58{\times}10^{17}cm^{-3}$, -1.54 V and 39.4 nm, respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.34-45
• /
• 1994

We studied threshold voltages and I-V characteristics. considering short channel effect of the fully depleted thin film n-channel SOI MOSFET. We presented a charge sharing model when the back surface of short channel shows accumulation depletion and inversion state respectively. A degree of charge sharing can be compared according to each of back-surface conditions. Mobility is not assumed as constant and besides bulk mobility both the mobility defined by acoustic phonon scattering and the mobility by surface roughness scattering are taken into consideration. I-V characteristics is then implemented by the mobility including vertical and parallel electric field. kThe validity of the model is proved with the 2-dimensional device simulation (MEDICI) and experimental results. The threshold voltage and charge sharing region controlled by source or drain reduced with increasing back gate voltage. The mobility is dependent upon scattering effect and electric field. so it has a strong influence on I-V characteristics.