• 한국항해항만학회지
• /
• 제30권4호
• /
• pp.277-283
• /
• 2006

It is a world trend to construct large terminal and develop automated container terminal to attract Super Post-Panamax and provide service which is based on differentiation. In fact, there is insufficient research for automatization of terminal gate since the automatization of current constructed container terminal is only focused on increasing productivity and unmanned system through the automatization of quay, yard, etc. In this paper, we have investigated advantage/disadvantage of existing gate operation systems and compared each gate operation system in the aspect of raising terminal image and the productivity. For the specific study, we have used data from actual terminal gate operation and RFID model business sponsored by MOMAF (Ministry of Maritime Affairs and Fisheries). As a result, this paper carried out an efficient gate operation system and it has been expected that it will be performed as groundwork of automated gate operation system which is for design of container terminal and improvement of gate operation system.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• 한국항해항만학회지
• /
• 제40권6호
• /
• pp.421-430
• /
• 2016

컨테이너 터미널에서 육상 운송을 담당하는 트럭 운송사 입장에서의 트럭 대기 시간을 줄이기 위한 게이트 시뮬레이션 모델을 개발하였다. 개발 모델의 검증을 위하여 부산신항 P항만을 대상으로 2014년 12월의 4주간 트럭 진출입 자료를 적용한 결과, 99% 이상의 정확성을 보였다. 또한, 개발한 시뮬레이션 모델을 통해 기존 게이트 시스템과 최근 게이트 시스템을 비교해 보았다. 결과적으로 동쪽 진입 게이트 기준으로 기존 게이트 시스템에서는 최대 50대의 트럭 대기와 120분의 대기 시간이 발생하였으나, 신규 게이트 시스템에서는 최대 10대의 트럭 대기와 5.3분의 대기 시간이 소요되었다. 서쪽 진입 게이트 기준으로 기존 게이트 시스템에서는 최대 17대의 트럭 대기와 34분의 대기 시간이 발생하였으나, 신규 게이트 시스템에서는 최대 10대의 트럭 대기와 5.3분의 대기 시간이 소요되었다. 서쪽 진출 게이트 기준으로 기존 게이트 시스템에서는 최대 11대의 트럭 대기와 5.5분의 대기 시간이 발생하였으나, 신규 게이트 시스템에서는 최대 9대의 트럭 대기와 4.4분의 대기 시간이 소요되었다. 본 개발 모델을 통하여 각 게이트의 트럭당 진출입 처리 시간에 따라 어느 정도의 트럭 대기가 발생하는지를 파악할 수 있게 되었다. 또한, 각 게이트에서 트럭 진출입에 따른 트럭당 처리 시간을 여러 시나리오별로 시뮬레이션하여 트럭의 대기가 발생되지 않는 최적 게이트 시스템의 운영 기준을 찾는데 활용될 수 있다.

• 한국항해항만학회지
• /
• 제31권9호
• /
• pp.771-778
• /
• 2007

A container terminal gate is not only an entrance of containers, but also the first input point of containers' information. Therefore, to achieve the accuracy of container information, there are various containers' numbers recognition methods used. Gate productivity can significantly vary depending upon those recognition methods. Recently, RFID which is one of the u-IT businesses run by the Korean government is under consideration for application to the gate as an automatic system. If RFID is used, it is expected to have both the qualitative benefits through avoiding defects of other systems and the quantitative benefits by improving productivity. Hence, this study aims to provide some insight on the benefits of RFID, and to compare productivity of the existing gate system with the RFID gate system based on computer simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.325-327
• /
• 1995

A new gate drive circuit of classic converter for a switched reluctance motor is presented. Conventional gate drive circuit usually consists of the isolated power supplies and signal transferring devices for isolation, such as photo coupler, pulse transformer, and gate drive chips. The proposed gate drive circuit consists of resistors, capacitors, and zenor diodes without isolated power supplies, that make the drive circuit simple and reduce the material cost. The operational modes are classified and analyzed. The characteristics of the phase current and the gate signal of upper switches is investigated with the variation of duty ratio through the experiments.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.173-177
• /
• 2000

본 논문은 컨테이너 터미널의 게이트에서 컨테이너 차량에 대한 통관업무를 무정차상태에서 수행이 가능한 자동게이트시스템(AGS: Automatic Gate System)의 구현에 대한 것이다. 이 AGS는 5.8GHz ISM 대역의 단거리전용통신(DSRC: Dedicated Short Range Communication) 시스템을 이용하고, 통관에 필요한 정보는 게이트에 설치된 기지국장치(RSE: Roadside Equipment)와 차량에 설치된 탑재장치(OBE: On Boa.0 Equipment)간의 무선통신을 통해 송수신된다. 기존의 시스템은 프린트를 통해 터미널내 정차위치정보(Slip)를 발급받기 위해 차량이 게이트에서 일단 정차해야 하는 번거로움이 있다. 본 논문에서는 DSRC 시스템과 이를 이용한 AGS에 대해 고찰하고, 기존의 시스템과의 차이점을 고찰하고자 한다.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.127-132
• /
• 2001

An automatic design system for a hydraulic gate has been developed to cut down the time for the design calculation and to optimize its design. It is oriented to the radial gate which is the simplest, most reliable, least expensive and most widely used hydraulic gate. This system is composed of data input, strength computation and result display modules with databases of the properties of components and materials. In this development, the existing intricate design procedure has been changed to the straightforward procedure without assumption of weight. With this code, the design time of the radial gate could be reduced below one thirtieth in comparison with manual work and the optimum design could be accomplished easily.

• 전자공학회논문지A
• /
• 제30A권5호
• /
• pp.52-62
• /
• 1993

This paper describes the implementation of a layout generation system for the gate matrix style to implement multi-level logic. To achieve improved layouts from general net lists, the proposed system performs flexible net binding for series nets. Also the system reassings gates by the heuristic information that shorter net lengths are better for the track minimization. By track minimizing with subdividing layout column information, the system decreases the number of necessary layout tracks. Experimental results show that the system generates more area-reduced (approximately 7.46%) layouts than those by previous gate matrix generation systems using net list inputs.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.192-198
• /
• 2006

The real-time simulator of a turning-type sluice gate actuated by the hydraulic cylinders is developed using a PC and a visual C++ program language. The real-time simulator receives the directional control valve signal selected by the operator using the mouse, updates the state variables of the turning-type sluice gate system responding to the control signal, and draws the moving figures of the sluice gate, cylinder, reserved water every drawing time on the PC monitor. Also, the operator can observe the sluice gate angle, cylinder force, cylinder pressures, and hydraulic power representing the operation of sluice gate system through the PC monitor every drawing time. The simulator can be a very useful tool to design and improve the turning-type sluice gate system.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.87-93
• /
• 2020

This study proposes a gate driver that operates semiconductor switches in the bipolar pulsed power modulator. The proposed gate driver was designed to receive isolated power and synchronized signals through the gate transformer. The gate circuit has a separate delay in the on-and-off operation to prevent a short circuit between the top and bottom switches of each leg. On the basis of the proposed gate circuit, a bipolar pulsed power modulator prototype with a 2.5 kV/100 A rating was developed. Finally, the bipolar pulsed power modulator was tested under resistive load and plasma reactor load conditions. It is verified that the proposed gate driver can be applied to a bipolar pulsed power modulator.