• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.375-378
• /
• 2011

덕티드로켓 추진기관에 사용되는 불완전연소 가스발생기를 설계/제작하고 연소시험을 수행하여 그 연소특성을 분석하였다. 추진시스템 설계요구조건을 바탕으로 가스발생기를 설계하고 산화제 함유량을 줄이고 금속연료 함량을 증가시킨 불완전연소용 고체연료 조성을 개발하여 가스발생기를 제작하였고, 이를 이용한 연소시험을 통해 다상 유동의 불완전연소 가스가 존재하는 가스발생기의 성능예측을 위해서는 별도의 해석기법이 요구됨을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권5호
• /
• pp.582-589
• /
• 2011

선박에서 배출되는 온실가스를 저감하기 위한 기술로 연료전지 기술이 고려되어지고 있다. 본 연구에서는 메탄을 연료로 사용한 내부개질형 500kW급 고체산화물형 연료전지의 선박 적용을 가정한 연료전지 시스템을 모델링하여 시스템의 구성에 따른 공기, 메탄, 물의 공급 유량 및 시스템 운전 압력이 연료전지 스택의 입구 및 출구에서의 가스 온도, 스택 출력 및 시스템 효율 등에 미치는 영향에 관하여 검토하였다. 그 결과 공기와 메탄의 공급 유량이 연료전지 스택 입구 및 출구 가스 온도에 직접적인 영향을 주었다. 공기와 물의 공급 유량이 증가하면 스택 출력 및 시스템 효율이 증가하고, 메탄의 경우 스택 출력은 증가하나 시스템 효율은 낮아진다.

• 한국가시화정보학회지
• /
• 제11권2호
• /
• pp.34-40
• /
• 2013

A flow visualization near submerged nozzle of solid rocket motor was conducted by experiments. A numerical simulation was also performed to reveal detailed phenomena. Radial cold flow simulating hot gas was introduced by a porous grain model which was manufactured by perforated steel plates. The grain model was mounted in high-pressure chamber which has quartz glass at the top of the grain model. From the high-speed images, a rotating vortex was observed and the two type of counter-rotating momentums were generated in numerical results. The rotating momentum was generated at the fin-slot grain because of unbalance between high-velocity flow from slots and low-velocity flow from fin-bases. As a result, roll torques can be produced by the rotating vortex tube.

• 수산해양기술연구
• /
• 제29권2호
• /
• pp.124-131
• /
• 1993

Recently. with the rapid development in large sea water systems. there occurs much interest in the study of erosion-corrosion. In this study. the mild steel(SB41) was tested by using of a erosion-corrosion test apparatus with fountain-jet and was investigated under the environments of liquid, air-liquid 2 phase flow and solid particle-liquid 2 phase flow. Main results obtained are as follows : 1. The weight loss by corrosion-erosion in air-liquid 2 phase flow are more increased than that in only liquid solution. 2. Effect of air-liquid 2 phase flow on corrosion-erosion sensitivity becomes more sensitive in natural seawater than that in distilled water. 3. The corrosion potential by corrosion-erosion in air-liquid and solid particle-liquid 2 phase flow becomes noble than that of only liquid solution.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권7호
• /
• pp.765-772
• /
• 2015

본 연구는 SOFC/GT(Solid Oxide Fuel Cell/Gas Turbine)시스템의 SOFC 스택으로 공급되는 공기, 메탄 및 물의 유량변화에 따른 SOFC/GT시스템의 온도, 스택 출력 및 시스템 효율의 특성에 관하여 조사하였다. 이 때 SOFC 스택의 애노드 및 캐소드로 공급되는 가스 온도는 외부 열원의 추가 없이 시스템에서 배출되는 배기가스를 활용하여 일정하게 유지하였다. 그 결과 본 연구의 범위 내에서 외부 열원의 추가 없이 SOFC/GT시스템의 배기가스를 활용하여 SOFC 스택으로 공급되는 애노드 및 캐소드 가스 공급온도를 1000(K)로 일정하게 유지하는 것이 가능하였다. 시스템 효율은 공급 공기 유량은 많을수록, 공급 메탄 유량은 적을수록 높아짐을 알 수 있었고, 터빈으로 공급되는 배기 가스의 유량이 시스템 효율에 큰 영향을 미침을 알 수 있었다. 또한, SOFC/GT시스템의 운전 조건에 따라서 SOFC 스택 효율은 51~57%, 시스템 효율은 57~73%의 값을 얻을 수 있었다.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.522-526
• /
• 2012

수직 고체하강관에서 고체하강속도를 측정할 수 있는 편리한 실험방법을 제시하였으며 Geldart 분류 A, B, D 입자를 사용하여 수직관의 직경 및 입자특성 변화에 따른 고체하강속도를 측정 및 고찰하였다. 초기 입자 장입량 변화에 따른 고체하강속도의 변화는 크지 않았으며 고체하강관 직경이 증가함에 따라 고체흐름속도, 고체순환속도 및 고체하강속도가 증가하는 경향을 나타내었다. 특히 고체하강속도의 경우 모든 입자에 대해 하강관의 직경이 증가함에 따라 직선적으로 증가하는 경향을 나타내었으며, Geldart 분류 A 및 B 입자와 Geldart 분류 D 입자의 결과가 확실하게 구별되는 경향을 나타내었다. 측정된 고체하강속도를 바탕으로 Geldart 분류 A 및 B 입자계와 D 입자계에 대한 고체하강속도 상관식을 제시하였으며 측정값과 유사한 값을 예측할 수 있었다.

• 한국대기환경학회지
• /
• 제15권2호
• /
• pp.201-210
• /
• 1999

Cyclones have been extensively used in the industry for removing fine particles from the gaseous streams, based on simplicity in design and construction in association with low cost and flexibility to operate in extreme and harsh environments. However, industrial cyclones are typically not very efficient for particles smaller than 10μm. In this work, in order to improve the separation efficiency of reverse flow cyclones, a simple device named Post Cyclone(Poc) in installed on the top of an existing cyclone. Thereby the residual swirl present at the outlet (vortex finder) of a conventional cyclone has been used to capture the escaped dust from the cyclone in the PoC. The performance of PoC was closely evaluated by changing configuration of the PoC and operation condition. In addition, the dust behaviour in th PoC was investigated based on the hypothesis of residual vortex.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.67-75
• /
• 2000

Computational fluid dynamics(CFD) analysis of the thermal flow in a municipal solid waste(MSW) incinerator combustion chamber provides crucial insight on the incinerator performance. However, the combustion of the waste bed is typically treated as an arbitrarily selected profile of combustion gas. A strategy for simultaneous simulation of the waste bed combustion and the thermal flow fields in the furnace chamber was introduced to substitute the simple inlet condition. A waste bed combustion model was constructed to predict the progress of combustion in the bed and corresponding generation of the gas phase species, which assumes the moving bed as a packed bed of homogeneous fuel particles. When coupled with CFD, it provides boundary conditions such as gas temperature and species distribution over the grate, and receives radiative heat flux from CFD. The combined simulation successfully predicted the physical processes of the waste bed combustion and its interaction with the flow fields for various design and operating parameters, which was limited in the previous CFD simulations.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.755-760
• /
• 2006

The exhaust gas with solid particle goes through the riser in both particle circulating type and circulating fluidized bed type heat exchanger to recover the heat. During heat transfer, gas velocity in vertical riser decreases as viscosity of exhaust gas decreases. In this case, when the particle size is fixed, sometimes the exhaust gas happens to have lower velocity which prohibit them to go out of the riser. In this paper the particle motion in vertical Rayleigh flow was studied. The behavior of heat transfer was investigated by means of velocity and temperature distribution. The result from numerical analysis was validated by the experimental results. Fortran code was used to analyze the particle motion in vertical Rayleigh flow.

• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.78-82
• /
• 1988

Good quality LiNbO3 single crystals which can be applied to SAW devices, were grown by Czochralski method. It was observed that the gas-bubbles were concentrated in ring shape at the outer part of grown crystals, and this anomaly was illustrated by modeling the mechanism of gas-bubble entrapment according to the melt flow pattern in the crucible. And this mechanism was also encertained by observation of solid-liquid interface shape of grown crystals. The optimal condition for good quality crystals was known that the solid-liquid interface shape was slightly concave.