• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.895-899
• /
• 2009

A new approach for the determination of acrylamide (AM) in foods by solid phase microextraction-gas chromatography (SPME-GC) was established. AM was bromized and transformed to 2-bromoacrylamide (2-BAM). 2-BAM was then extracted by a commercial SPME fiber, $75-{\mu}m$ Car/PDMS fiber, for GC detection. The influence of extraction and desorption parameters such as extraction temperature and time, stirring rate, desorption temperature, and time were studied and optimized. The mass concentration was proportional to the peak area of 2-BPA from 1.0 to 8,000 ${\mu}g/L$. The detection limit of the SPME-GC for 2-BAM was found to be 0.1 ${\mu}g/L$, and the recoveries and relative standard deviations for different food samples were 74.5 to 102.0%, and 4.2 to 9.1%, respectively. The presented method was applied to the determination of AM in fried foods.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.907-911
• /
• 2013

Numbers of matrix- and analyte-derived ions and their sum in matrix-assisted laser desorption ionization (MALDI) of a peptide were measured using 2,5-dihydroxybenzoic acid (DHB) as matrix. As for MALDI with ${\alpha}$-cyano-4-hydroxy cinnamic acid as matrix, the sum was independent of the peptide concentration in the solid sample, or was the same as that of pure DHB. This suggested that the matrix ion was the primary ion and that the peptide ion was generated by matrix-to-peptide proton transfer. Experimental ionization efficiencies of $10^{-5}-10^{-4}$ for peptides and $10^{-8}-10^{-7}$ for matrices are far smaller than $10^{-3}-10^{-1}$ for peptides and $10^{-5}-10^{-3}$ for matrices speculated by Hillenkamp and Karas. Number of gas-phase ions generated by MALDI was unaffected by laser wavelength or pulse energy. This suggests that the main role of photo-absorption in MALDI is not in generating ions via a multi-photon process but in ablating materials in a solid sample to the gas phase.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.115-127
• /
• 1999

The charged clusters or particles, which contain hundreds to thousands of atoms or even more, are suggested to form in the gas phase in the thin film processes such as CVD, thermal evaporation, laser ablation, and flame deposition. All of these processes are also used in the gas phase synthesis of the nanoparticles. Ion-induced or photo-induced nucleation is the main mechanism for the formation of these nanoclusters or nanoparticles inthe gas phase. Charged clusters can make a dense film because of its self-organizing characteristics while neutral ones make a porous skeletal structure because of its Brownian coagulation. The charged cluster model can successfully explain the unusual phenomenon of simultaneous deposition and etching taking place in diamond and silicon CVD processes. It also provides a new interpretation on the selective deposition on a conducting material in the CVDd process. The epitaxial sticking of the charged clusters on the growing surface is gettign difficult as the cluster size increases, resulting in the nanostructure such as cauliflowr or granular structures.

• Food Science and Biotechnology
• /
• 제14권2호
• /
• pp.238-241
• /
• 2005

Aroma-active compounds were evaluated from salt-fermented anchovy sauce by solid phase microextraction-gas chromatography-olfactometry (SPME-GC-O) based on sample dilution analysis (SDA). SPME extract from carboxen/polydimethylsiloxane (CAR/PDMS) fiber was the most similar to the original odor of salt-fermented anchovy sauce used for this experiment, followed by divinylbenzene/CAR/PDMS (DVB/CAR/PDMS) fiber. Because salt-fermented anchovy sauce contains 23% NaCl, NaCl concentration of diluent was considered when salt-fermented anchovy sauce was serially diluted. Linear relationship between GC response and sample concentration was observed when diluted with 23% NaCl solution, whereas not observed when diluted with deodorized distilled water. Eleven and 16 aroma-active compounds were detected by SPME-GC-O based on SDA using CAR/PDMS and DVB/CAR/PDMS fibers, respectively. Butanoic acid and 3-methyl butanoic acid showed the highest ${\log}_2SD$ factors for CAR/PDMS and DVB/CAR/PDMS fibers. Dimethyl trisulfide, methional, trimethyl amine, 1-penten-3-ol, and acetic acid were also detected as potent aroma-active compounds.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.94-94
• /
• 2010

As a new plasma source for the plasma enhanced chemical vapor deposition (PCVD) of ${\mu}c$-Si deposition, we have demonstrated a microwave-excited plasma source, which can produce high density (${\sim}10^{12}\;cm^{-3}$) plasma with low electron temperature (~1 eV) and low plasma potential (~10 V). In this plasma source, microwave power radiated from slot antenna is distributed along the plasma-dielectric interface in large area and this enables us to produce uniform high-density plasma in large area. To optimize deposition conditions, deep understanding of gas phase chemistry is indispensable. In this presentation, we will discuss on the gas phase diagnostics of microwave $SiH_4/H_2$ plasma such as $SiH_4$ dissociation or $SiH_3$ radical profile as well as deposited film properties.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.46-56
• /
• 1998

The objective of this study was to investigate the relationship between water vapor diffusion properties and the pore structure of paper. Gas-phase molecular diffusivity of water vapor through pores was determined based on the kinetic theory of gas. A mathematical model was derived to characterize the dimensional changes of the pore caused by the fiber-swelling mechanism. A modified-Fickean diffusion model was designed to simulate the water-vapor diffusion phenomena in porous paper web. Structural characterisocs of paper pores including the tortuosity and the shape factor was studied on a theoretical basis of Knudsen flow diffusion. Results are summarized as follows: 1. The theoretical water vapor diffusivity in gas-phase was 0.092$cm^2$ /min, 2. Porosity was inversely proportional to the degree of wet-swelling of paper, 3. Solid-phase water-diffusivity of fiber was 1.2 $ \times 10^{-5}cm^2/min$, 4. Modified diffusion model was fairly consistent to the experimental data (from part I), and 5. The Fickean pore tortuosity, ranging from 1,000 to 2,500, was in inverse proportion to the porosity of paper, and the Knudsen shape factor and length-angle factor for micro-pores in paper were 0.5~3.5 and about 340, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.415-415
• /
• 2012

ZnO nanostructures were synthesized by a vapor phase transport process in a single-zone furnace within a horizontal quartz tube with an inner diameter of 38 mm and a length of 485 mm. The ZnO nanostructures were grown on Au-catalyzed Si(100) substrates by using a mixture of zinc oxide and graphite powders. The growth of ZnO nanostructures was conducted at $800^{\circ}C$ for 30 min. High-purity Ar and $O_2$ gases were pushed through the quartz tube during the process at a flow rate of 100 and 10 sccm, respectively. The sequence of ON/OFF cycles of the Ar gas flow was repeated, while the $O_2$ flow is kept constant during the growth time. The Ar gas flow was ON for 1 min/cycle and that was OFF for 2 min/cycle. The structure and optical properties of the ZnO nanostructures were investigated by field-emission scanning electron microscope, X-ray diffraction, temperature-dependent photoluminescence. The preferred orientation of the ZnO nanostructures was along c-axis with hexagonal wurtzite structure.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.593-602
• /
• 2016

본 연구에서는 근접연계방식의 초음속기체 금속분말 미립화장치에 대한 수치해석을 수행하였다. 액체금속의 미립화 과정에서 발생하는 1, 2차 액적분열을 모사하기 위해서 난류 모델을 선정하고 VOF(Volume of Fluid), DPM(Discrete Phase Model) 해석을 차례대로 수행하였다. 해석결과, Level-Set function 분포도를 통해 1차 분열액적의 직경을 계산할 수 있었으며 이 데이터를 DPM 해석에 반영해 도메인 출구에서 수집된 입자들의 최종직경분포를 확인할 수 있었다.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.29-37
• /
• 2005

The spray and acoustic characteristics of a gas/liquid swirl coaxial injector are studied experimentally. The self-pulsation is defined as a pressure and flow rate oscillations by a time-delayed feedback between liquid and gas phase. Self-pulsation has strong influences on atomization and mixing processes and accompanies painful screams. So. the spray and acoustic characteristics are investigated. Spray patterns are observed by shadow photography technique in order to determine the onset of self-pulsation. And self-pulsation boundary with Injection conditions and recess length is get. To measure the frequency of the spray oscillation. oscillation of the laser intensity which passes through spray is analyzed by Fast Fourier Transform. For acoustic tests, a PULSE System was used. Acoustic characteristics of a swirl coaxial injector are investigated according to the injection conditions. such as the pressure drop or the liquid and gas phase. and injector geometries. such as recess length and gap size between the inner and outer injector. Front the experimental results. the increase of recess length leads to the rapid increase of the sound pressure level. And as the pressure drop of the liquid phase increases. the frequency of the self?pulsation shifts to the higher frequency. The frequency of spray oscillations is the same as that of the acoustic fields by self-pulsation.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 2003년도 정기총회 및 학술발표회
• /
• pp.76-76
• /
• 2003

We report here the results on N-acetyl-N'-methylamide of 4-fluoroproline (Ac-Flp-NHMe) calculated using the ab initio molecular orbital method with the self-consistent reaction field (SCRF) theory at the HF level with the 6-31+G(d) basis set to investigate the stereoelectronic effects on the conformational preference of proline depending on the cis/trans peptide bonds and down/up puckerings along the backbone torsion angle $\square$ in the gas phase, chloroform, and water. In the gas phase, all potential energy surfaces for Ac-Flp-NHMe are quite similar to those of Ac-Pro-NHMe, except that up-puckered conformations are more stabilized than down-puckered ones. In chloroform and water, polyproline structures become dominant, whose populations are larger than those of Ac-Pro-NHMe. In chloroform and water, the populations of polyproline II (i.e., tF conformations) are quite similar to each other, but those of polyproline I (i.e., cF conformations) are larger by 5％ in water than in chloroform. In particular, all cis populations for Ac-Flp-NHMe in the gas phase, chloroform, and water are decreased than those of Ac-Pro-NHMe.