• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.699-706
• /
• 2022

In this study, Directed energy deposition (DED) among additive manufacturing is applied to repair damaged spindle key parts of planner miller. The material of the spindle key is SCM415, and the P21 Powder is used. In order to find the optimal deposition conditions for DED equipment, a single-line deposition experiment is conducted to analysis five parameters. The laser power affects the width, and the height is a parameter affected by coaxial gas and powder gas. In addition, laser power, powder feed rate, coaxial gas, and powder gas are parameters that affect dilution. Otimal deposition is that 400 W of laser power, 4.0 g/min of powder feed rate, 6.5 L/min of coaxial gas, 3.0 L/min of powder gas and 4.5 L/min of shield gas. By setting the optimum conditions, a uniform deposition cross section in the form of an ellipse can be obtained. Damage recovery process of spindle key consists of 3D shape design of the base and deposition parts, deposition path creation and deposition process, and post-processing. The hardness of deposited area with P21 powder on the SCM415 spindle key is 336 HV for the surface of the deposition, 260 HV for the boundary area, and 165 HV for the base material.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1656-1660
• /
• 2007

Using solid inorganic peroxides (including Li2O2, Na2O2, SrO2 and BaO2) as starting materials, three reaction paths for singlet oxygen (1O2) production were developed and studied. Their 1O2 emission spectra in the near- IR region and visible region from these reaction paths were simultaneously recorded by a near-IR sensitive Optical Multichannel Analyzer and a visible sensitive Optical Spectrum Analyzer, respectively. The comparison of their 1O2 emission spectra indicated that: (1) in term of the efficiency for 1O2 production, the gasliquid- solid reaction path (in which Cl2 or HCl and H2O reacted with the solid inorganic peroxides suspension in CCl4) was prior to the gas-solid reaction path (in which Cl2 or HCl reacted with the solid inorganic peroxides suspension in CCl4), but was inferior to the gas-liquid reaction path (in which Cl2 or HCl reacted with the solid inorganic peroxides solution in H2O or D2O); (2) the alkali metal peroxides (such as Li2O2 and Na2O2) was prior to the alkaline earth metal peroxides (such as SrO2 and BaO2) as the solid reactants, and Cl2 was favorable than HCl as the gas reactant in efficiency for 1O2 production in these reaction paths.

• 한국추진공학회지
• /
• 제3권4호
• /
• pp.93-103
• /
• 1999

소, 중형 산업용 항공기나 초등 훈련기용으로 많이 이용되고 있는 터보프롭 엔진의 정상상태 성능해석 프로그램을 개발하고 성능진단을 위해 선형 GPA 기법을 적용하였다. 정상상태 성능해석 프로그램의 검증을 위해 상용 정상상태 해석 프로그램인 TURBOMARCH 해석결과와 비교하였다. 지상정지조건에서의 성능 및 비행마하수에 따른 출력 둥을 비교한 결과 각 구성품의 입,출구 온도 및 압력, 출력 등에서는 약 3%이하의 오차율을 보였으며, 마하수 변화에 따른 출력 비교에서도 최대오차율 2.4 % 이내로 프로그램의 신뢰성을 확인하였다. 선형 GPA 기법의 계측변수의 선정에 따른 정확성을 알기 위해 종속변수의 선정을 다르게 하여 오차율을 알아보았다. 성능저하 원인으로는 압축기에만 오염이 발생하였을 경우, 압축기와 압축기 터빈에 각각 오염과 부식이 발생하였을 경우, 압축기 터빈과 동력터빈에 동시에 부식이 발생하였을 경우, 압축기, 압축기 터빈, 동력터빈이 모두 오염과 부식이 발생하였을 경우를 가정하였다. 해석결과 계측기 변수가 많을수록 RMS 오차가 적었으며 같은 수의 계측기 변수라 하더라도 어떠한 변수를 계측하는가에 따라 오차율이 달라짐을 알 수 있었다. 비교적 오차율이 적으면서 경제성이 있는 경우는 8개의 측정변수를 이용한 경우로 최적의 계측기 수 및 계측기 변수 선정이 중요함을 알 수 있었다.

• 한국대기환경학회지
• /
• 제19권4호
• /
• pp.451-465
• /
• 2003

The major conversion processes of SO$_2$ to sulfate are reactions in gaseous, aqueous phase and on dust surface. Using the measurement data in Ganghwa, the background area of metropolitan Seoul Area, the relative contiribution of the conversion processes are estimated. Generally, aqueous cloud if the most important conversion path followed by dust surface, gas, and aqueous aerosol. Importance of conversion on dust surface increases for the dust storm period. The total conversion rate values over the metropolitan Seoul area are between 1.5 and 8.8$\times$10$^{-11}$ mole m$^{-3}$ air.

• 한국안전학회지
• /
• 제33권3호
• /
• pp.8-14
• /
• 2018

Ni-base superalloy has excellent resistance to extreme environments such as high temperatures and high stresses and are used as materials for large gas turbines. In this paper, the specimens were taken from the blade that were used for a long time, and their life span was studied by microstructure analysis and avoidance of cursing. The microstructural analysis of the specimens was carried out using a OM and SEM to observe the coarsening, carbides on gamma prime. Low-cycle fatigue tests were performed on new material and airfoil of long time-used blade. The test was conducted under various deformation conditions and temperature conditions of $760^{\circ}C$ and $870^{\circ}C$. The low cycle fatigue test was carried out using the Coffin-Manson equation and the fatigue life was predicted. After the test, crack path and fracture surface were analyzed using SEM.

• KDI Journal of Economic Policy
• /
• 제34권4호
• /
• pp.1-26
• /
• 2012

한국 및 여타 국가들의 온실가스 배출 관련 정책들은 기본적으로 배출 전망치를 바탕으로 수립되는바, 노동생산성이 높은 증가세를 보이는 부문에서 낮은 증가세를 보이는 부문으로 진행되는 구조적 변화-산업별 노동생산성 증가, 산업 전반의 배출 저감, 인구 증가를 고려한-의 예상경로가 핵심 요소가 된다. 따라서 구조적 변화의 원인을 모델화하는 작업은 배출량의 정확한 예측을 위해서 중요하다. 본 보고서는 한국경제 데이터를 활용하여 구조적 변화와 녹색성장 모델을 수립 및 평가함으로써 한국과 국제사회의 온실가스 담론을 위한 정책 함의성을 도출한다.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.16-21
• /
• 2007

Three dimensional numerical study was carried out to investigate the effect of aspect ratio on microchannel flow. We considered five straight rectangular channels with aspect ratios (height/width) 0.2, 0.4, 0.6, 0.8 and 1.0. Nitrogen gas flow was investigated for both slip and noslip wall boundary conditions. Isothermal wall condition was assumed. We used control volume method for this simulation. The slip velocity increases with the increase of aspect ratio. Friction coefficient decreases with the increase of aspect ratio. Slip friction coefficient is lower than noslip friction coefficient. Mass flow rate of slip model is higher than that of noslip model. We compared our results with the experimental result reported in the literature. The agreement was good.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2479-2482
• /
• 2010

Using a pinhole-type glass nozzle equipped for a corona-excited supersonic expansion (CESE), precursor 2,6-dichlorotoluene seeded in a large amount of inert carrier gas helium was discharged to produce jet-cooled but electronically excited benzyl-type radicals. The visible vibronic emission spectrum was recorded with a long-path monochromator to observe vibronic bands in the $D_1{\rightarrow}D_0$ electronic transition of benzyl-type radicals. The spectral analysis revealed the generation of not only the 2,6-dichlorobenzyl radical as a typical product, but also the o-chlorobenzyl radical as an unexpected species, which indicates the possible molecular rearrangement in eliminating a chlorine atom from the benzene ring. A possible mechanism is proposed for the formation of the o-chlorobenzyl radical from the precurs or in the gas phase.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.161-166
• /
• 2011

The passive open-path Fourier-Transform-Infrared system was implemented for the toxic gas monitoring. Noise Equivalent Differential Temperature(NEDT) was investigated as a system performance evaluation figure and analyzed numerically with the designed parameters. Calculated NEDT was compared with the experimental value in the wavelength region of $700{\sim}1400cm^{-1}^$. The minimum detectable gas concentration was estimated from the obtained NEDT at the absorption wavelength of $SF_6$.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.204-208
• /
• 2006

In this study, we investigated the ion energy distributions in a chlorine based inductively coupled plasma by quadrupole mass spectrometer with an electrostatic ion energy analyzer. Ion energy distributions are presented for various plasma parameters such as $BCl_3/Ar$ gas mixing ratio, RF power, and process pressure. As the $BCl_3/Ar$ gas mixing ratio and process pressure decreases, and RF power increases, the saddle-shaped structures is enhanced. The reason is that there are ionized energy difference between $BCl_3$ and Ar, change of plasma potential, alteration of mean free path. and variety of ion collision in the sheath.