• 한국항만경제학회지
• /
• 제34권1호
• /
• pp.35-49
• /
• 2018

부산항은 국내 물동량의 75% 이상을 처리하는 제1의 항만이며, 세계 글로벌 항만 중 6위를 차지하고 있다. 본 연구는 부산항의 중추역할을 하면서 시내와 가까이 위치한 북항에 접안하는 선박들로부터 발생되는 배기가스를 추정하고, 항만 주변으로 어떻게 확산되는지 분석하고자 한다. 이를 위해 미국 환경보건국에서 제안한 배기가스산출모형을 적용하여 선박유형별 배출량을 산정하고, 대기확산모형인 CALPUFF Model를 통해 계절, 기상상태, 시간변화에 따른 배기가스의 대기확산 패턴을 분석한 후, 시사점을 도출하였다. 분석결과, 주요 오염원인 질소산화물, 이산화황, 미세먼지의 배출량은 각각 30,853톤, 36,281톤, 6,856톤이며, 유조선에서 42%로 가장 많이 발생하였다. 또한 맑은 날엔 대기오염이 항만주위에 정체되고, 바람 부는 날엔 넓게 확산되며, 비오는 날엔 가장 옅어지는 경향을 보였다. 본 연구의 결과는 대기오염의 심각성을 인식하게 하며, 향후 공공보건을 위한 정책 수립시 기초자료로 활용이 가능하다.

• 미생물학회지
• /
• 제53권3호
• /
• pp.193-199
• /
• 2017

This study was aimed to evaluate the antimicrobial activity of Penicillium purpurogenum ED76 on several clinically important microorganisms. The endophytic fungus P. purpurogenum ED76 was previously isolated from Swietenia macrophylla leaf. The antimicrobial efficacy of P. purpurogenum ED76 dichloromethane extract was determined via disc diffusion and broth microdilution assay. A kill curve study was conducted and the morphology of extract treated bacterial cells were viewed under scanning electron microscope. The dichloromethane extract showed significant inhibitory activity on 4 test bacteria and 2 test yeasts. The minimal inhibitory concentration of the extract ranged from 125 to $1,000{\mu}g/ml$, which indicates the different susceptibility levels of the test microorganisms to the fungal extract. The kill curve study has revealed a concentration-dependent inhibition for all test microorganisms. With the increase of the extract concentration, the microbial growth was significantly reduced. The scanning electron micrograph of dichloromethane extract-treated Staphylococcus aureus cells showed the total damage of the cells. The cell wall invagination of the bacterial cells also indicates the loss of cellular materials and metabolic activity. The gas chromatography mass spectrometry analysis of the extract also showed that the major compound was stigmasterol, which constitutes 45.30% of the total area. The dichloromethane extract of P. purpurogenum ED76 exhibited significant inhibitory activity on several clinically important bacteria and yeasts. The study proposed a possible mode of action that the extract cause significant damage to the morphology of S. aureus cells.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.106-112
• /
• 2010

This paper presents some experimental results on incubation time for massive hydriding of Zr alloys with oxide thickness. Oxide effects experiments on massive hydriding reaction of commercial Zr alloy claddings and pre-oxidized Zr alloys with hydrogen gas were carried out in the temperature range from 300 to $400^{\circ}C$ with thermo-gravimetric apparatus. Experimental results for oxide effects on massive hydriding kinetics show that incubation time is not proportional to oxide thickness and that the massive hydriding kinetics of pre-filmed Zr alloys follows linear kinetic law and the hydriding rate are similar to that of oxide-free Zr alloys once massive hydriding is initiated. There was a difference in micro-structures between oxide during incubation time and oxide after incubation time. Physical defects such as micro-cracks and pores were observed in only oxide after incubation time. Therefore, the massive hydriding of Zr alloys seems to be ascribed to short circuit path, mechacical or physical defects, such as micro-cracks and pores in the oxide rather than hydrogen diffusion through the oxide resulting from the increase of oxygen vacancies in the hypostoichiometric oxide.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.39-43
• /
• 1993

Electricial characteristics of gate dielectrics prepared by reoxidation of thermal $SiO_2$ in nitrous oxide gas have been investigated. 10 and 19nm-thick oxides were reoxidized at temperatures of $900-1000^{\circ}C$ for 10-60 min in $N_2O$ ambient. As reoxidation proceeds, it is shown that nitrogen concentration at $Si/SiO_2$ interface increases gradually through the AES analysis. Nitrogen pile-up at $Si/SiO_2$ interface acts as a oxidant diffusion barrier that reduces the oxidation rate significantly. And it not only strengthen oxynitride structure at the interface but improve the gate dielectric qualities. Reliabilities of oxynitride films are conformed by the breakdown distributions and constant current stress technique. Therefore, the oxynitride films made by this process show a good promise for future ULSI applications.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.24-30
• /
• 2004

Analysis model for the two-phase catalytic reactor is presented. With the progress in development of micro thermofluidic devices, needs fur understanding of the phenomena in two phase reaction in cm scale has been arisen. To investigate thermal and reactive performance of down scaled two phase reactor simple analysis model that is a kind of lumped flow model is proposed. Analysis model presented is based on the experiment on mm scale model reactor. Target experiment is catalytic decomposition of 70wt％ hydrogen peroxide with existence of perovskite L $a_{0.8}$S $r_{0.2}$Co $O_3$ catalyst. It is composed of balance equations of mass and energy. Each phase is considered to be a species fur the simplicity. Axial diffusion and transversal distribution of properties are neglected. Two phase catalytic reaction is modeled as successive gasification of liquid lump around catalyst and reaction in gas phase. Heat transfer is modeled by model function ofNu number. Modeled Nu is expressed as Nu=N $u_{0}$ (1＋ $a_1$( $a_2$ $T^{-}$ $a_3$)exp( $a_4$ $T^{-1}$)exp( $a_{5}$ z). Transfer coefficients are determined by the comparison of experimental results. With the model, heat transfer characteristics are investigated. Also by the mass transfer coefficient, characteristics in mass transfer is investigated. With the result basic understanding on design and analysis of mm scale two-phase reactive device is obtained. Also it can be further applied to micro scale reactive device fabricated by micromachining.ing..

• Composites Research
• /
• 제29권5호
• /
• pp.262-268
• /
• 2016

본 연구에서는 피치계 탄소섬유기반 탄소종이에 바인더 피치와 PAN계 미분쇄 탄소섬유를 첨가하여 저온탄화를 통해 재함침된 탄소종이를 제작하였으며, 미분쇄 탄소섬유의 첨가가 탄소종이의 기계적 및 전기적 특성과 열전도도에 미치는 영향을 알아보았다. 실험 결과, 인장강도는 미분쇄 탄소섬유 함량 10 wt.%부터 20 wt.%까지 첨가하였을 때 크게 증가하였다. 또한, 미분쇄 탄소섬유 함량이 증가함에 따라 계면접촉저항은 감소하였으며, 전기전도도 및 열전도도는 증가하였다. 이러한 결과는 미분쇄된 탄소섬유의 첨가가 탄소종이의 밀도를 증가시킴에 따라 전기적 및 열적 전달 경로가 형성되었기 때문이라고 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.351-358
• /
• 2006

The capability of high pressure injection with small fuel quantify at all engine operating conditions is one of the main feature in common rail fuel injection system, which is used in small and light-duty Diesel engine. The key parameter for the better atomized fuel sprays and multiple injections of this common rail fuel injection control, that can be freely selected irrespective of the engine speed and load is the mechanism controlling the needle energizing and movement in high pressure Diesel injector. In the electro-hydraulic injector, the injection nozzle is being opened and closed by movement of the injector's needle which is balanced by pressure between the nozzle seat and the needle control chamber. This study describes the macroscopic spray structure characteristics of the common rail Diesel injectors with different electric driving method i.e. the solenoid-driven and piezo-driven type. The macroscopic spray characteristics such as spray tip speed. spray tip penetration and spray cone angle were investigated by the high speed spray, which is measured by the back diffusion light illumination method with optical system for the high speed temporal photography in a constant volume chamber pressurized by nitrogen gas. As the results, the prototype piezo-driven injector system was designed and fabricated for the first time in domestic case and the effect of injector's needle response driven by different drive type was compared between the solenoid and piezo-driven injector It was found therefore. that the piezo-driven injector showed faster needle response and had better needle control capability by altering the electric input value than the solenoid-driven injector.

• 대한임상독성학회지
• /
• 제18권1호
• /
• pp.18-25
• /
• 2020

Purpose: We studied the impact of arterial oxygen tension (PaO₂) on the long term neurologic outcome in patients with acute carbon monoxide poisoning. Methods: The study population included 311 patients who presented to emergency department with acute CO poisoning from January 2015 to January 2018. These patients underwent arterial blood gas testing at the time of presentation. The baseline demographic, clinical, laboratory, and clinical outcome data were recorded. The primary outcome of interest was the long term neurologic status. Results: The normoxia group was significantly older and it had a higher incidence of diffusion weighted MRI abnormality, and this group needed multiple HBO sessions compared to the group with moderate or severe hyperoxia. Also, the incidence of altered mentality at discharge was higher in the normoxia group than that of the moderate hyperoxia group. The incidence of a poor long term neurologic outcome was 11.3%. The incidence of a poor long term neurologic outcome decreased as the PaO₂ increased. The PaO₂ was significantly lower in patients with a poor long term neurologic outcome than that of the patients with a good outcome 198 (165.2 to 231.1) mmHg in the good outcome group vs. 154 (119-162) mmHg in poor outcome, p<0.001). In multivariate logistic regression analysis, PaO₂ was selected as an independent factor of the poor long-term neurologic outcome (OR 0.981 (95% CI: 0.968 to 0.995)) Conclusion: Higher PaO₂ was independently associated with a lower incidence of a poor long-term neurologic outcome.

• 대한치과마취과학회지
• /
• 제2권1호
• /
• pp.1-6
• /
• 2002

The usage of nitrous oxide is increased for the anxious patient to dental treatment. There are two methods to induce the sedation during dental treatment. One is sedation with drugs the other no need of drugs. We discussed here about sedation with drugs. The methods of drug administration are oral, intramuscular, intravenous, inhalation. The method of oral administration of drugs are convenient to patient and doctor but poor controllability. Intramuscular method is a parenteral technique that maintains several advantages over the enteral technique. However its pales in comparison to other parenteral technique. Intravenous method represents most effective method of ensuring predictable and adequate sedation in all patients. But it has inability to reverse the action of drugs after they have been injected except some drugs (e.g., narcotics and benzodiazepine). A variety of gaseous agents may be administered by inhalation to produce sedation. In dental practice, the inhalation administration of gas means use of nitrous oxide. There are many advantages of nitrous oxide administration. First, very short latent period and rapid onset of drug action which lead to possible titration of drug concentration. With nitrous oxide, clinical effects may become noticeable as quickly as 15 to 30 seconds after inhalation. Recovery from inhalation sedation is also quite rapid. In out patient dental practice rapid recovery is very important because it permit to discharge the patient without escort and the patient return to their ordinary life without limit. To success the conscious sedation with nitrous oxide, the administrator should be keep the mind that always titration of nitrous oxide concentration during induction and treatment. Careful observation need during treatment to prevent oversedation because the adequate nitrous oxide concentration to patients changed by environmental stress. Always begins with 100% oxygen and ends with 100% oxygen to prevent diffusion hypoxia which rare in clinical practice.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.553-559
• /
• 2006

Most diesel injector, which is currently used in high-pressure common rail fuel injection system of diesel engine, is driven by the solenoid coil energy for its needle movement. The main disadvantage of this solenoid-driven injector is a high power consumption, high power loss through solenoid coil and relatively fixed needle response's problem. In this study, a prototype piezo-driven injector, as a new injector mechanism driven by piezoelectric energy based on the concept of inverse piezo-electric effect, has been designed and fabricated to know the effect of piezo-driven injection processes on the diesel spray structure and internal nozzle flow. Firstly we investigated the spray characteristics in a constant volume chamber pressurized by nitrogen gas using the back diffusion light illumination method for high-speed temporal photography and also analyzed the inside nozzle flow by a fully transient simulation with cavitation model using VOF(volume of fraction) method. The numerical calculation has been performed to simulate the cavitating flow of 3-dimensional real size single hole nozzle along the injection duration. Results were compared between a conventional solenoid-driven injector and piezo-driven injector, both equipped with the same micro-sac multi-hole injection nozzle. The experimental results show that the piezo-driven injector has short injection delay and a faster spray development and produces higher injection velocity than the solenoid-driven injector. And the predicted simulation results with the degree of cavitation's generation inside nozzle for faster needle response In a piezo-driven injector were reflected to spray development in agreement with the experimental spray images.