• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.4
• /
• pp.200-204
• /
• 2014

LPG is used in the home would have to depend on the provider, because there is no method for measuring the capacitance. In addition, by measuring the gas capacities can not be known because of the LPG gas replacement time and requires an alarm for replacement. In this study, and that the gas capacities to the trusted user and the supplier, in order to know when it is time to change to LPG gas by applying a Hall effect sensor developed a gas capacities measurement the valve system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.121-129
• /
• 2011

Hydrocarbons which are the main sources of VOCs from motor vehicles are emitted not only from the engine exhaust gas but also from evaporation of the fuel in storage and supplying systems. Evaporative emissions from gasoline fuel systems could be classified by diurnal, hotsoak and running loss. Diurnal loss test procedures are different as countries. Korea introduced new evaporative regulation in 2009 with 24hour VT-shed test procedure and relaxed emission standards. The estimations on different test procedures in this study show that the new Korean regulation get a little more severe than before and the 2 day diurnal loss test of U.S. is the most severe. So the test procedures as well as the stronger standards should be considered in the next evaporative emission regulation to reduce VOCs from motor vehicles. The important parameters to affect evaporative emissions are air and fuel temperature and fuel vapor pressure. Diurnal loss increases exponentially as rising air temperature and vapor pressure. The effects of vapor pressure on running loss are different as the capacities of canisters. Tests with simulating real temperature and driving conditions show that hydrocarbons in evaporative emissions could be more than those in exhaust gas in summer season because of the higher air temperature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.181-190
• /
• 2011

The air pollutants from vehicle exhaust gas are affected by many factors including fuel qualities, engine and vehicle technologies, driving patterns. In particular, fuel qualities and after-treatment devices could directly affect the emission level of pollutants. The pollutant reduction characteristics that caused by enforced fuel quality standard were analyzed. Three types of test fuel were selected in accordance with Korean automotive fuel standard in 2006, 2009, 2012 and used for vehicle emission test in chassis dynamometer. European COPERT correction equation of fuel impact was considered as reference information to quantify the vehicle emission test results. The contribution rates of exhaust emission by COPERT correction equation showed that aromatic compounds and oxygen contents in gasoline fuel was most important. In case of diesel fuel, cetane index and polycyclic aromatic compounds accounted for the greater part. The exhaust emission effects by COPERT correction equation revealed that CO and VOC was increased 0.86%, 1.57% respectively in after 2009 gasoline when compared to before 2009 gasoline fuel. In case of light-duty diesel vehicle CO, VOC and PM were decreased in range of 3~7%. The result from this study could be provided for developing future fuel standards and be used to fundamental information for Korean clean air act.

• Korean Business Review
• /
• v.20 no.2
• /
• pp.87-104
• /
• 2007

With the effectuation of Kyoto Protocol, one of the important movement throughout the world is reducing the emission of greenhouse gas which is the main reason of making global warming. The actual factor of greenhouse gas is CO2, and in year of 2002 20% of total CO2 emission was produced only through transportation throughout the South Korea. In the contrary, the recycling of municipal wastes in South Korea was 44.0% in 2002, but it will be targeted upto 53.5% in 2011. This study applied survey research for the activities affecting to the emission of CO2 and packaging wastes produced from transportation and packaging stages in logistics area. For this, survey questionary was constructed with five specific areas - strategy, transportation & distribution, custody, packaging, and information. Based on the 144 returned survey questionaries, this study analyzed 54 categories and finally suggests necessary four alternative in Korea.

• Journal of the Korean Institute of Gas
• /
• v.6 no.4 s.18
• /
• pp.53-58
• /
• 2002

In this research, the goal is to ascertain the potential danger when transporting hazardous material by considering the important elements that contribute to such situation, instead of relying on the quantitative risk assessment of fixed facilities. Also, this study will verify the social and personal risk according to damage zone limits, by applying the worst case scenario and the alternative scenario that occur during the transportation process. Moreover, it has selected the optimum transportation route for maximum safety. The result of this research could be used to construct a systematic emergency system that can minimize the damage from serious industrial accidents, by effectively decreasing the danger zone and forming a connection between the community, the society, and the industries according to such evaluations.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.229-240
• /
• 2008

With the effectuation of Kyoto Protocol, one of the important movement throughout the world is reducing the emission of greenhouse gas which is the main reason of making global warming. The actual factor of greenhouse gas is CO2, and in year of 2002 20% of total CO2 emission was produced only through transportation throughout the South Korea. In the contrary, the recycling of municipal wastes in South Korea was 44.0% in 2002, but it will be targeted upto 53.5% in 2011. All of these show environment-conscious logistics should be implemented together throughout the each stage of distribution with the development of product and service. This study applied survey research for the activities affecting to the emission of CO2 and packaging wastes produced from transportation and packaging stages in logistics area. For this, survey questionary was constructed with five specific areas - strategy, transportation & distribution, custody, packaging, and information. Based on the 148 returned survey questionaries, this study analyzed 52 categories and finally suggests necessary modal shift, collaboration & co-operation in logistics, LCA(life-cycle assessment), and other promoting policies for the environment-conscious logistics in effective way.

• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.301-311
• /
• 2014

In this study, we estimated the amount of fuel used fishing boats of individual based on the results of survey of the activity data such as operations and activities specification of fishing boats in Korea. Based on the classification system of the domestic fishing boat, and to estimate average fuel consumption and the greenhouse gas emissions, showed emission factors per fishing boat. This was suggested to be able to apply the registration data area in the future, and estimates the emissions of greenhouse gases. Based on these results, it tries to provide the basic data that can be used when you want to create a local government measures to reduce scenario in the future.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.32-40
• /
• 2021

Mold design for in-mold coating was carried out to achieve simultaneous injection molding and two-color coating for car gas cap cover. The developed mold includes one core and three cavities which are composed of a substrate cavity and two coating cavities. To provide a sealing edge for complete seal during the second coating, the first coated material was used at the boundary between the first coating and the second one, and injection molded substrate was used at the parting line. The materials used were PC/ABS for substrate and 2-component Polyurea for coating. Through experiments, it was found that the suggested sealing edges were effective for complete seal during the second coating. In cavity pressure traces, there were three peaks caused by mold closing, coating-material injection and cleaning-piston advancement inside the mixing head. The cavity pressure increased with decreasing coating thickness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.125-126
• /
• 2022

As environmental problems around the world become serious, Korea has also raised the greenhouse gas reduction in the building sector to 32.8% compared to 2018, and efforts to reduce carbon in buildings are expanding. Recently, research is being actively conducted to reduce carbon in the long term by expanding the scope of greenhouse gas indirect emissions (Scope3), and even within the domestic Green Standard for Energy and Environmental Design(G-SEED) by quantitatively evaluating the environmental impact of buildings during the entire life cycle. However, it is difficult to accurately evaluate the carbon emission of the transportation process by assuming the material transport distance in the evaluation of the Life Cycle Assessment(LCA). Therefore, in this study, the main building materials of the building were selected through case evaluation and the carbon emission of the material transport process was derived based on the actual transport distance, and this was compared and analyzed with the theoretical LCA results.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.44-49
• /
• 2013

Due to rapid rise of consuming rate for natural gas, installation and operation of high pressure natural gas pipeline is inevitable for high rate of gas transportation. Accordingly incidents on the underground high pressure natural gas pipeline come from various reasons will lead to massive release of natural gas and gas dispersion in the air. Further, fire and explosion from ignition of released gas may cause large damage. This study is for release rate, dispersion and flash fire of natural gas to establish a safety management system, setting emergency plan and safety distance.