• Journal of Preventive Medicine and Public Health
• /
• 제27권2호
• /
• pp.274-285
• /
• 1994

The effects of resin on the respiratory health have been investigated in 309 workers from four iron and steel foundries and the results compared with those from 122 workers who were not significantly exposed to resin gas and silica dust at the same industries. Phenol-formaldehyde resin was used in the core making and molding processes and workers were exposed to their decomposition products as well as to silica dust containing particulates. The subjects were grouped according to formaldehyde, dust and other gas exposures, and smoking habits were considered also in thi analysis. Standardized respiratory symptom questionnaire was administered by trained interviewers. Chest radiograph, pulmonary funtion tests, and methacholine challenge tests were done. Environmental measurements at the breathing zone were carried out to determine levels of formaldehyde, respiable dust and total dust. Foundry workers had a higher prevalence of symptoms of chronic bronchitis with chronic phlegm and chronic cough when exposed to dust. Exposure to gas was significantly associated with lowered $FEV_1$ and obstructive pulmonary function changes. Exposure to formaldehyde and phenol gas was associated with wheezing symptom among workers, but $FEV_1$ changes after methacholine challenge were not significantly different among different exposure groups. When asthma was defined as the presence of bronchial hyperreactivity with more than 20% decrease in $FEV_1$ after methacholine challenge, 17 workers out of 222 tested had asthma. Fewer asthmatic welters were found among groups exposed to formaldehyde, gas and dust, which indicates a healthy worker effects ill a cross-sectional study. The concentration of formaldehyde gas ranged from 0.24 to 0.43 ppm among studied foundries. The authors conclude that formaldehyde and phenol gas from combusted resin is probably the cause of asthmatic symptoms and also a selection force of those with higher bronchial reactivity away from exposures.

• 한국가스학회지
• /
• 제27권2호
• /
• pp.1-6
• /
• 2023

시공 편의성 및 경제성 측면에서 장점이 있는 PE배관은 국내 도시가스 분야에서 지하 매설용으로 많이 사용되고 있다. 이러한 PE배관은 유지·보수 공사 중 가스 흐름을 차단하기 위해 많은 현장에서 스퀴즈오프를 활용하고 있다. 스퀴즈오프란 PE배관을 압착하여 유체 흐름을 차단하는 방법을 말하며 물리적인 힘에 의해 배관의 변형이 일어나는 공사의 특성상 손상이 발생할 수 있다. 본 연구에서는 스퀴즈오프에 따른 PE배관의 손상방지를 위해 압축률에 따른 손상평가 및 기밀시험을 통해 적정한 압축의 범위와 사용 압력, 관경 등의 스퀴즈오프 작업 절차에 반영될 주요 사항들을 도출하였다. PE배관 손상평가를 위한 압축 실험은 압축률(20%~40%)과 사용압력 (2.8kPa, 25kPa, 70kPa), 관경(63mm, 90mm, 110mm)을 변화시키면서 실시하였다. 압축률에 따른 손상평가 결과, 과도한 압축에 따른 영향을 분석하기 위한 압축률인 45%(110mm), 73%(63mm)인 배관에서 파손이 발생하였다. 또한, 스퀴즈오프 작업 중 기밀시험은 Ar(아르곤)을 이용하여 진행되었으며, 실험결과 70kPa의 조건과 110mm 의 배관 조건에서 누출이 발생하였다. 본 연구 결과, 기밀유지를 위한 스퀴즈오프는 25kPa이하의 사용압력 및 90mm 배관을 초과하지 않는 범위의 배관에서 작업을 실시해야하며 PE배관의 손상방지를 위한 적정 압축률은 30%임을 확인하였다. 이와같은 내용을 도시가스용 PE배관의 스퀴즈오프 작업 절차에 반영할 예정이다.

• Applied Microscopy
• /
• 제47권1호
• /
• pp.50-54
• /
• 2017

The microstructure, the crystallization behavior, and magnetic properties of FeSi-based soft magnetic alloys (FINEMET) were investigated using transmission electron microscopy, X-ray diffraction, and coercive force measurements. The amorphous $Fe_{73.28}Si_{13.43}B_{8.72}Cu_{0.94}Nb_{3.63}$ alloys particles, prepared in $10^{-4}$ torr by gas atomization process, were heat treated at $530^{\circ}C$, $600^{\circ}C$, and $670^{\circ}C$ for 1 hour in a vacuum of $10^{-2}$ torr. Nanocrystalline Fe precipitation was first formed followed by the grain growth. Phase formation and crystallite sizes was compared linked to its magnetic behavior, which showed that excellent soft magnetic property can directly be correlated with its microstructure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.122-123
• /
• 2007

고전압 가스 차단기에서는 긴 스트로크 동안 가스반발력을 극복하고 빠르게 차단할 수 있는 액추에이터가 필요하다 기존에는 공압식, 유압식, 스프링 액추에이터와 같은 기계적인 장치가 사용되었다. 그러나 기존 액추에이터에서는 소음, 에너지 손실, 고가적의 단점이 있어, 근래에 들어 PMA, 모터와 같은 전기적 장치도 사용되고 있다. 전기 액추에이터는 간단한 구조로 되어 있어 기계적 손실을 줄일 수 있고 소음이 적은 장점이 있다. 전자석 조작기의 연구 필요성에 따라 새로운 형태의 전자석 조작기 Electro Magnetic Force driving Actuator(EMFA)가 개발되어 고전압 가스 차단기에 적합하다고 분석되었다. EMFA의 동특성을 얻기 위한 과도상태 해석에서는 2차원 유한요소법을 이용하여 얻은 전자기적 해석을 회로, 운동방정식과 연계하여 시간차분법을 사용하여 해석하였다. 하지만 2차원과 3차원의 전자기 해석은 차이를 보인다는 것을 확인하였고 정확한 전자기 해석을 위해 3차원 동특성 해석을 수행하여 실험결과와 비교하였다.

• 한국항공우주학회지
• /
• 제35권10호
• /
• pp.934-939
• /
• 2007

추력방향제어는 발사 직후 비행체를 임의의 방향으로 급선회해야 할 경우에 초음속 노즐의 배출가스 방향을 조절하여 측력과 모멘트를 형성시키는 방법이다. 본 연구에서는 압축공기를 이용한 비 연소시험으로 초음속유동 시험장치를 이용하여 기계적 편향판인 램프 탭의 설치위치에 따라 성능연구를 수행하였다. 밀도변화에 따라 유동장을 관찰할 수 있는 쉬리렌 장치를 이용하여 램프 탭 내부에서 발생하는 유동장 구조와 경사충격파의 위치 등을 가시화하였다. 아울러 각 방향에 작용하는 제어 힘, 추력손실 및 표면 압력 분포 등을 도시분석하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.93-100
• /
• 2019

Nuclear and thermal power plants must provide the turbines with an appropriate degree of high temperature and high pressure steam, to produce the optimum electricity. Additionally, in the event of system and power system failure during electrical production, the steam is immediately disabled, to protect the turbines and generators rotating at high speed. The plant thus uses a special steam control valve system for turbine control, which is opened by force of the hydraulic servo actuator and closed by a large steel spring force. In this study, the causes of failure of the turbine control valve system, a key device of the power plants, were analyzed, and the causes of failure were improved relative to reliability of the equipment.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.690-695
• /
• 2016

Induction cooktop has a great attention due to its safety, quick heating and cleanness compared to gas oven. However, the materials for induction cookware is limited to steel or stainless-steel which has the magnetic property. Recently, it has been tried to apply various porcelain to induction cookware after printing the silver layer on the bottom of cookware plates and co-firing at high temperature. Glass frits are added in the silver paste to improve an adhesion force between porcelain materials containers and transferred silver layer. The hybrid silver pastes for induction cookware requires the proper electrical resistance and the thermal conductivity with base plates. After sintering process at $800^{\circ}C$, a part of melted glass migrated to the porcelain and the rest of the glass frit was exposed to the surface. It was confirmed that most of the glass frit formed an adhesion layer between the porcelain and transferred silver layer that enhances the adhesion force.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• 한국소음진동공학회논문집
• /
• 제25권9호
• /
• pp.606-613
• /
• 2015

In this study, the torsional vibration analysis for a marine propulsion system is carried out by using the transfer matrix method(TMM). The torsional moment produced by gas pressure and reciprocating inertia force may yield severe torsional vibration problem in the shaft system which results in a damage of engine system. There are several ways to control the torsional vibration problem at hand, firstly natural frequencies can be changed by adjusting shaft dimensions and/or inertia quantities, secondly firing order and crank arrangement are modified to reduce excitation force, and finally lower the vibration energy by adopting torsional vibration damper. In this paper, the viscous torsional vibration damper is used for reducing the torsional vibration stresses of shaft system and it is conformed that optimum model of the viscous damper can be determined by selecting the geometric design parameters of damper and silicon oil viscosity.

• 천문학회지
• /
• 제40권4호
• /
• pp.179-182
• /
• 2007

Dynamical friction plays an important role in reducing angular momenta of objects in orbital motions. While astronomical objects usually follow curvilinear orbits, most previous studies focused on the linear-trajectory cases. Here, we present the gravitational wake due to, and dynamical friction on, a perturber moving on a circular orbit in a uniform gaseous medium using a semi-analytic method. The circular orbit causes the density wakes to bend along the orbit into asymmetric configurations, resulting in the drag forces in both opposite (azimuthal) and lateral (radial) directions to the perturber motion, although the latter does not contribute to the orbital decay much. For a subsonic perturber, the bending of a wake is only modest and the resulting drag force in the opposite direction is remarkably similar to the linear-trajectory counterpart. On the other hand, a supersonic perturber is able to overtake its own wake, possibly multiple times, creating a high-density trailing tail. Despite the dramatic changes in the wake morphologies, the azimuthal drag force is in surprisingly good agreement with the formulae of Ostriker for the linear-trajectory cases, provided $V_pt=2R_p,\;where\;V_p\;and\;R_p$ are the velocity and orbital radius of the perturber, respectively.