• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2366-2371
• /
• 2007

Spray combustion characteristics of a conducting fuel electrospray have been studied for clean combustion technology. The multiplexing system which can retain the characteristics of the cone-jet mode is inevitable for the electrospray application. Charged micro droplets can be obtained in almost uniform size during operating the electrospray in the cone-jet mode. This experiment device set up the multiplexed grooved nozzle system with the extractor. Using the grooved nozzle, the stable cone-jet mode can be achieved at the each groove in the grooved mode. This electrospray system was applied to the diffusion combustion. It is the first step to discover the diffusion combustion characteristics of the electrospray. In case of the single grooved nozzle electrospray, the diffusion flames are occurred at each jet of grooved mode and they are quite stable. The exhaust gas analysis was indicated that there is the critical point which can make very stable diffusion combustion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.1-8
• /
• 2002

For gasoline engines, a three-way catalytic converter that has the maximum efficiency at stoichiometric air/fuel ratio is used to clean up the exhaust gas. So a precise air/fuel ratio control is necessary to maximize the catalytic conversion efficiency, For a transient condition, a fred-forward air/fuel ratio control method that estimates the air mass inducted into a cylinder is being used. In this study, a fuel injection map that makes an accurate air/fuel ratio control possible was constructed for the very same transient condition. For the same condition above, intake air model and fuel model were refined so that fuel injection values based on air mass through a throttle valve and intake manifold pressure are equal to the map values.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.397-402
• /
• 1999

The base pressure of the vacuum vessel of KSTAR tokamak is to be ultra high vacuum, $10^{-6}\sim10^{-7}Pa$, to produce a clean plasma with low impurity concentrations. For this purpose, vessel and plasma facing components need to be baked up to $250^{\circ}C$, $350^{\circ}C$ respectively to remove impurities from the plasma-material interaction surfaces. Here the required heating power to be supplied for baking has been calculated according to pre-assumed different temperature profiles (baking scenario and proper baking plan for KSTAR tokamak has been proposed. Mass flow rate and temperature of nitrogen gas for baking has also been calculated.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.243-246
• /
• 2004

Currently, advanced countries invest lots of efforts to develop improvement of electric power production and supply, confronting environmental problems and new energy development. They set up long term plan focusing on electric power transmission infrastructure construction technology, establishment of the customer care service network using electric technologies, improvement of economic productivity by innovative electric technology, prevention of global warming gas and clean and efficient energy use etc. Comparing to those countries, the level of technologies that we have are in behind and moreover, technological resources are limited. Therefore, Korea is required to reconsider efficient distribution of R&D investment by concentrating on limited R&D resources to important technologies which could be stepping stone to gain competitive advantage. It can be done through comparative analysis of electric technologies among advanced countries and analysis of electric technology development policy.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.2
• /
• pp.41-48
• /
• 2009

The Government declared 'Low-Carbon Green Growth' as the new national vision for future development to improve economic growth and quality of life through higher energy efficiency, less energy consumption, wider use of renewable energy, etc. Korea can no longer delay participating in international efforts against global warming by reducing carbon dioxide and other greenhouse gas emissions. Thus low-carbon green growth is not a matter of choice, and it becomes indispensible to sustaining the nation's economic development. The Government is determined to take the initiative in speeding up economic recovery by carrying out the large scale investment projects such as the Korean version of a 'Green New Deal. The 49 trillion-won projects include river improvement, eco-friendly transportation networks, advanced information infrastructure, water resources & dam construction, green cars & clean energy development, etc. which will create nearly one million new jobs over the next four years.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.132-139
• /
• 2007

This study was performed to apply the more rapid and accurate sample preparation, and the high selectivity and sensitivity of the analyte detection by gas chromatography-triple quadrupole mass spectrometry (GC-MS/MS). QuEChERS (quick, easy, cheap, effective, rugged and safe) method was validated for 49 agrochemicals in the CORESTA Agrochemical Advisory Committee guide and amenable to GC-MS/MS determination. In QuEChERS method, the effects of sorbents (PSA, $C_{18}$ and GCB) and matrix of the analytes in tobacco types (flue-cured, burley and oriental) were investigated. MS/MS acquisition provided high specificity and selectivity for agrochemicals and low limit of quantification. QuEChERS by using PSA alone and the matrix-matched standards gave good recoveries and RSD values in three types of tobaccos. QuEChERS method was no needed to be complex clean-up procedure and would be used as the fast and easy method for agrochemical residue analysis in tobacco.

• Journal of Food Hygiene and Safety
• /
• v.9 no.2
• /
• pp.89-94
• /
• 1994

A simple, safe, and sensitive gas chromatographic method using packed column and electron capture detector to analyze 2, 4-D herbicide in imported lemon, grapefruit, and orange was described and its usefulness evaluated. In this scheme of analysis the acid herbicide was converted into its alkyl esters by an one-step reaction prior to analysis. The herbicide in the fruits was extracted with ethyl acetate and partitioned against dichloromethane for purification, and the extracts finished partitioning were derivatized with alcohol, using sulfuric acid as a catalyst to form the corresponding alkyl derivatives. The analytical scheme studiedwas found to be applicable for the herbicide in the fruits without a column clean-up procedure. The mean recoveries of the herbicide for lemon samples fortified at 0.1 mg/kg and 1.0 mg/kg were 93% and 95%, respectively. The detection limit was 0.5 $\mu\textrm{g}$/kg for 2.4-D methyl ester.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.12
• /
• pp.979-985
• /
• 2007

Spray combustion characteristics of the conducting fuel electrospray has been studied for clean combustion technology. The electrospraying multiplexed system which can maintain the characteristics of the cone-jet mode is able to obtain charged micro droplets with high flow rate. In addition, they have monodisperse distribution during operating the electrospray in the cone-jet mode. The multiplexed grooved nozzle system with the extractor was applied to this experimental device set up. The stable grooved mode can be generated by the grooved nozzle and this electrospray system was applied to the diffusion combustion. It is the first step to discover the diffusion combustion characteristics of the electrospray, In case of the single grooved nozzle electrospray the diffusion flames are occurred at each Jet of grooved mode and they are quite stable. The exhaust gas analysis was indicated that there is the critical point which can make very stable diffusion combustion

• Journal of Environmental Health Sciences
• /
• v.9 no.1
• /
• pp.89-93
• /
• 1983

Various analytical methods for p-Nitrophenol derivatives have been reported as follows. 1) Thin-Layer Chromatography, 2) Gas Chromatography, 3) Cholinesterase Activity Determination, 4) Diazo Method, 5) Nitrophenol Method, 6) Indophenol Method. But these methods are mainly analyse total quantity of p-Nitrophenol and are not available for the seperation and pose some analytical problems associated with extensive clean up procedure. A rapid and simple method was developed for the seperation and quantitation for the p-Nitrophenol and it's derivatives by HPLC. Also an experiment was undertaken by the authors for the quantitation of the p-Nitrophenol in the blood of the intoxicated body. Levels of p-Nitrophenol ranging from approximately 0.10 to $1.69 \mu g/ml$ for Parathion and $3.44 \mu g/ml$ for EPN in each sample were measured with the average recovery of $95.5\pm0.52%$

• Bulletin of the Korean Chemical Society
• /
• v.1 no.4
• /
• pp.117-121
• /
• 1980

The effect of lateral intermolecular interactions among the adsorbate molecules has been incorporated into the theory of multilayer physical adsorption developed previously by the present authors within the frame of Bragg-Williams approximation and the resulting adsorption isotherm has been used to interpret the adsorption data of tetramethylsilane vapor on clean iron film which we failed to account for in our previous works. The result has shown that up to the point where the relative pressure is about 0.7 considerable improvement is obtained but beyond this point there still remains large difference between theoretical and experimental isotherm. Such difference is supposed to arise from the neglect of effect of vertical interaction between the adsorbate molecules and the adsorbent surface.