• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.201-206
• /
• 1992

Annual amount of plastics waste including rubber and leather waste, generated in 1990 was about 2,600,000 tons. Amount of generation of plastics waste has rapidly increased, but fractions of recycling and incineration have gradually decreased. Recently, two-stage incinerator, consisting of gasifier and gas combustor, draws much attention in Korea. Plastics are gasified in the starved air condition in the gasifier and produced gas is fired in the combustor. Combustion of produced gas is much easier than that of solid plastics, and produces a little pollutants. Standardzation of technology and process automation are still needed, but this incineration technology is in the commercial stage. Next topic concerned with this two-stage incineration will be how to treat complex plastics waste including toxic substances generated from automobiles and household appliances. Pyrolysis, realized by indirect heating in inert atmosphere, can provide high-quality products with minimum emissions. Many plastics are easily decomposed into oil in pyrolysis conditions, which can be utilized as chemical feedstocks, or gasoline or kerosene depending on feed materials and operating conditions. This has been demonstrated in several pilot-scale tests performed in Japan, Germany, etc. Easy removal of HCl from PVC is one of the most decisive merits of pyrolysis process. But in general, further efforts should be made for the process to obtain marketability. The future of pyrolysis process depends on public concern about environmental problems and oil prices.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.79-80
• /
• 2016

In the event of a fire on the outer walls of an architectural structure, through real scale experiments with the purpose of estimating the Flame Trajectory, the behavior and risks of expanded combustion to an upper architectural compartment of the Fire Plume Ejected from an Opening according to changes in the aspect ratio of the opening were examined. The results showed that the more the heat release rate of the fire source increased, the heat capacity of the Fire Plume Ejected from the Opening also increased, and for the case of heptane when compared with methanol or ethanol, the results showed a trend for a significant amount of unburned gas to remain. The results also showed that the larger the aspect ratio was, the more likely it was for the Flame Trajectory to approach the outer walls and rise up. In each of the experiment conditions, as the flame rose from the lower part of the wall to the upper part of the wall, a steady decrease was shown for the temperature distribution. Also by quantitatively analyzing the amount of unburned gas that remained, a method to estimate the temperature of the Fire Plume Ejected from an Opening for a traverse opening was implemented.

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.2
• /
• pp.69-74
• /
• 2017

Sodium hypochlorite, used as water disinfectant, is generated by electrolysis of salt. Compared to chlorine gas disinfection, it is free from high-pressure gas regulation and does not generate toxic gas, so it is increasingly used as a safe disinfectant. Despite these advantages, the concentration of sodium hypochlorite decreases with temperature during long-term storage, and the amount of chlorate increases when a large amount is added, it has mainly been applied to small-scale waterworks. To solve this problem, high sodium hypochlorite generation was developed. In this study, the changes of concentration and chlorate of sodium hypochlorite with time has been studied. As a result of the test, it was found that the usable period of sodium hypochlorite produced at a certain temperature or less was increased from 1.5 days to 13 days. Overall, sodium hypochlorite can be applied even in large-scale waterworks, which makes operation more stable and also reduces the disinfection byproducts, thus it contributed greatly to securing water quality.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.446-450
• /
• 2013

TRISO coated particles with a ZrC barrier layer were fabricated by a fluidized-bed chemical vapor deposition (FBCVD) method for a use in a very high temperature gas-cooled reactor (VHTR). The ZrC layer was deposited by the reaction between $ZrCl_4$ and $CH_4$ gases at $1500^{\circ}C$ in an $Ar+H_2$ mixture gas. The amount of free carbon codeposited with in ZrC was changed by controlling the dilution gas ratio. Near-stoichiometric ZrC phase was also deposited when an impeller was employed to a $ZrCl_4$ vaporizer which effectively inhibited the agglomeration of $ZrCl_4$ powders during the deposition process. A near-stoichiometric ZrC coating layer had smooth surface while ZrC containing the free carbon had rough surface with tumulose structure. Surface roughness of ZrC increased further as the amount of free carbon increased.

• Journal of the Korean Institute of Gas
• /
• v.19 no.2
• /
• pp.45-53
• /
• 2015

In order to improve the performance of the visual inspection process, in addition to existing automatic visual inspection machine and human inspectors have developed a new process configuration using a Naive Bayes classifier. By applying the classifier, defect leakage and human inspector's work amount could be improved at the same time. New classification method called AMPB was applied instead of conventional methods based on MAP classification. By experimental results using the filter product for camera modules, it was confirmed that it is possible to configure the process at the level of leakage ratio 1.14% and human inspector's work amount ratio 75.5%. It is significant that the result can be applied in such a wide range as gas leak detection which is the collaboration process between inspection machine and human inspector's

• Journal of Hydrogen and New Energy
• /
• v.32 no.1
• /
• pp.68-76
• /
• 2021

Climate change problems occur during the use of fossil fuel and the process of biogas production. Research continues to convert carbon dioxide and methane, the major causes of climate change, into high-quality energy sources. in order to present the performance potential for the novel plasma-recuperative burner reformer, the reforming characteristics for each variable were indentified. The optimal operating condition of was an O2/C ratio of 1.0 and a total gas supply of 20 L/min. At this time, CH4 conversion was 64%, H2 selectivity was 39%, and H2/CO ratio was 1.13, which were the results applicable to the solid oxide fuel cell fuel stack for RPG, or Residential Power Generator. Recirculation of reformed gas increases the amount of H2 and CO, which are combustible gases, especially the amount of H2. As a result, the H2 selectivity is improved, and high-quality gas can be produced.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.478-485
• /
• 2022

The certification performance issued through an external business is sold to companies subject to the emission trading system allocation, and the company subject to the allocation can secure the quota by converting the purchased external business certification performance into offset credits. In this methodology, when fossil fuels that used existing oil boilers (by oil type) were replaced with boilers using propane gas with a relatively low carbon content, the amount of carbon dioxide emission reduction by oil type was recognized. As an initial analysis to make up for the insufficient quota of large corporations, the amount of carbon reduction emissions and emission rights trading was calculated.

• Journal of Hydrogen and New Energy
• /
• v.34 no.6
• /
• pp.594-600
• /
• 2023

In this study, a process model and optimization design direction for a hydrogen production plant through ammonia decomposition are presented. If the reactor decomposition rate is designed to approach 100%, the amount of catalyst increases and the devices that make up the entire system also have a large design capacity. However, if the characteristics of the hydrogen regeneration process are reflected in the design of the reactor, it becomes possible to satisfy the total flow rate of fuel gas with the discharged tail gas flow rate. Analyzing the plant process simulation results, it was confirmed that when an appropriate decomposition rate is maintained in the reactor, the phenomenon of excess or shortage of fuel gas disappears. In addition, it became possible to reduce the amount of catalyst required and design the optimized capacity of the relevant processes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.1
• /
• pp.19-27
• /
• 1983

This paper deals with hardness and wear characteristics of ion-nitrided metal, and with ion-nitride processing which is concerned with the effects of added carbon content in gas atmosphere. A small optimal amount of carbon content in gas atmosphere increase compound layer thickness, as well as to increase diffusion layer thickness and hardness, and reduces wear rate when the applied wear load is small. It is found in the analysis that under small applied wear load, the critical depth where voids and cracks may be created and propagated is located at the compound layer, so that the abrasive wear where hardness is an important factor, is created and the existence of compound layer reduces the amount of wear. When the load becomes large, the critical depth is located below nucleation and propagation, is created and the existence of compound layer increase wear rate.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.66-73
• /
• 1997

This procedure describes the method for gas chromatographic determination of 31 organophosphorus and 28 organochlorine pesticides in 10g of spinach, tomato and onion. After the pesticides were extracted with several solvents, the amount of coextractives and recovery rates of acephate and methamidophos were calculated. Samples for organochlorine pesticides were cleaned up with florisil solid phase extraction columns. NaBH$_4$ was added to onion extracts, which contained sulfur compound. All the concentrated extracts were analyzed by gas chromatography with ECD and NPD. The smallest amount of coextractives resulted from the spinach samples extracted with 5% MeOH in ethyl acetate. 5% EOH in ethyl acetate had the highest extractability for acephate and methamidophos and gave the best overall performance as an extraction solvent. The ability of 5% EOH in ethyl acetate to extract various organophosphorus and organochlorine pesticides from spinach, tomato and onion was examined. Recovery of 59 insecticides ranged from 58.0% to 110.5%. The average recoveries of fortified spinach, tomato and onion were 90.08%, 94.54% and 84.90%, respectively.