• 한국의류학회지
• /
• 제31권2호
• /
• pp.292-299
• /
• 2007

Development of portable device measuring the vital sign continuously with no limit of time and space is absolutely prerequisite for the U-health care that grafts the ubiquitous concept into medical system. Accordingly, it requires to develop a garment style apparatus for measuring vital-sign that is easy to wear on for a long time period. This study suggests a method to improve the insulation of electric cable and the skin adhesion of electrode by integrating the electric conductive material to garment, in order to develop a garment apparatus for measuring ECG for U-health care. Results of the research are as follows; In order to provide the adjacent conductive yarns with insulation, braid with narrow woven end was interlaced using polyester yarn. As a result, the direct contact between electric conductive yarns was restrained, which would be interposed into pin-tuck structured cable. Washable silicone gel applied around the electrode made of electric conductive fabric improved the adhesion, which prevents electrodes from dropping off from the skin surface during body movement. ECG signals on the human subject were tested using the garment apparatus developed by the above method. And the result was that the clear QRS wave formation in the typical form of ECG could be measured in both conditions of still and moving state as well. The result of this study is expected to contribute for the production of U-health care related medical apparatus by accelerating the practical uses of the garment measuring vital sign at a reasonable price.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.635-645
• /
• 2015

This study analyzed the range of motion of upper body in different configurations of firefighters' protective clothing and equipment. The purpose of this study was to understand the influence of firefighters' protective clothing and equipment over upper body motion in order to improve design of firefighters' protective clothing and equipment. 12 firefighters' upper body range of motion was analyzed while performing standing and walking trials in five different garment configurations including turnout ensemble, fire boots and the self-contained breathing apparatus. Analysis of upper body range of motion included spinal joints of L5S1, L4L3, T1C7, and C1Head. During standing trials, garment configurations caused a significant difference in range of motions at joints of L5S1, L4L3, T1C7, and C1Head. Analysis on the mean of range of motions at L5S1 and L4L3, showed that firefighters' waist bent forward significantly to a greater extent while they wore a self-contained breathing apparatus. A significantly increased range of motion was found for T1C7 and C1Head while carrying a self-contained breathing apparatus, which indicated an increase in the extension of the trunk and neck backward to stand upright and look squarely. A significant difference in range of motion was also found for L5S1 and L4L3 during walking trials.

• 한국의류학회지
• /
• 제34권1호
• /
• pp.112-125
• /
• 2010

A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.

• 복식문화연구
• /
• 제22권4호
• /
• pp.565-578
• /
• 2014

This study is about the cases in fashion figure appearing the contemporary fashion and their characteristics. The work aims at providing a further active research opportunity for fashion figure in the modern fashion field and finding several possible utilizations to help the overall fashion industry through examination. Research methodology was followed up with the related literature review and empirical work through the case study of multiple fashion figures denoted in the contemporary fashion. The results showed in the following way for types of fashion figure in the modern fashion. The first type is that its figure was used for stage apparatus in fashion collection, various properties, or garment tool as doll shifted to a certain object. The second type is that art toy or fashion doll was used as specially added product via way of cooperation with fashion brand to be applied as fashion figure alone or other properties for T-shirt or something like that. The third type is the case that multifariously sized figures were applied to show window or shop display. This type of fashion figure is basically an imbedded fashionistic feature, reflecting the rarity, publicity, playfulness, and artistic value.

• 복식문화연구
• /
• 제19권1호
• /
• pp.31-41
• /
• 2011

Jacket is popular ready-made garment among college students in their early 20s. However, ready-made jackets, which are designed to fit normal people, are not likely to fit sportsmen well who have highly developed muscles in particular parts of their bodies. And muscle development is quite different among sportsmen according to the types of sports and bodily movements. Therefore, ready-made jackets can not be expected to fit sportsmen well as they fit normal people who have different shapes of bodies from sportsmen. The purpose of this study is to investigate the factors of fitness and comfortableness of jackets for sportsmen in their early 20s according to the types of sports to provide basic data for designing suitable garments for them. Research method, 362 college sportsmen in their early 20s were surveyed from June 2nd 2009 to June 9th 2009, and 360 of them were processed statistically, with 2 of them having been discarded for lack of sincerity. Among Taekwondo players, Arm Length was the most complained part, among wrestlers, Biacromion Length was the most complained part, among fencers, 'Waist Circumference' was the most complained part, among swimmers, Biacromion Length was the most complained part, among apparatus gymnast, 'Hip Circumference' was the most complained part, among track athletes and handball players, more than 20% answered that the jackets did not fit them in every parts. It was understood that different sportsmen complained of particular parts of the jackets and that parts of the jacket should be adjusted according to bodily shapes of different sportsmen. This study was made to investigate the factors to be considered in producing ready-made jackets for college sportsmen. It is hoped that more patterns will be developed on the basis of the original form of jacket and the result of this study.