• 설비공학논문집
• /
• 제11권6호
• /
• pp.891-897
• /
• 1999

The heat transfer characteristics at the interface between the mold and the casting is one of the major factors for the solidification speed which determines the casting structures. The thermal resistance exists due to air gap formation at the mold/casting interface during the freezing process. In this study one dimensional Stefan problem with the air-gap resistance in the cylindrical mold is considered and the heat transfer characteristics is numerically examined by using the enthalpy method which is convenient in solving the Stefan problem with mushy zone. The present results agreed very well with those of previous papers. The effects of major parameters such as thermal conductivity, heat transfer coefficient of mold, on the thermal characteristics are investigated.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.79-84
• /
• 2011

In this study, breakdown characteristics of a vertical sphere-plane air gap in the presence of combustion flame were examined under the application of a.c. and d.c. high-voltages in order to investigate the effect of flame on the dielectric strength of air. Propane gas is used as the fuel of the flame, and the temperature distribution of air around the flame is measured. The polarity effects for the d.c. voltages and breakdown voltages of air when applied both of a.c. and d.c. voltages were examined in the case of the variation of the gap length and the horizontal distance between the flame and the high-voltage sphere electrode. The influence of relative air density, electrification and shape changes of the flame as factors that affect the breakdown voltages were discussed.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2003년도 추계학술대회
• /
• pp.123-123
• /
• 2003

Primary cultures of rat fetus brain exhibit phenotypes of neuron, oligodendrocyte, and astrocyte from "neurospheres". To understand the role of mitogen-activated protein kinase (MAPK) cascade and gap junctional intercellular communication (GJIC) in the differentiation of neurosphere-derived astrocyte, we investigated the effects of 12-O-tetradecanoylphorbol-13-acetate (TPA) on the cultured astrocyte morphology.(omitted)

• 대한약리학회지
• /
• 제27권2호
• /
• pp.99-108
• /
• 1991

Racemic ketamine을 사용하여 개구리의 좌골신경 및 toe muscle에 대한 작용을 관찰하였다. 실험방법으로는 214 mM sucrose을 사용하여 서로 다른 두 종류의 투여 방법으로 세포막의 활동 전압에 대한 영향을 electric recording으로 관찰하였다. 즉, intracellular 투여는 single sucrose gap technique으로, extracellar 투여는 double sucrose gap technique을 사용하였으며 그 실험 결과는 아래와 같았다. 1. Racemic ketamine은 개구리의 좌골신경 및 toe muscle의 활동전압을 intracellular 및 extracellular 투여시 모두 의의 있게 억제하였다. 2. 개구의 toe muscle에서 $K^+$-수축을 억제하였다. 3. naloxone은 ketamine의 억제작용을 완전히 차단하지는 못하였다.

• 전자공학회논문지
• /
• 제51권3호
• /
• pp.202-209
• /
• 2014

본 논문에서는 원형편파 패치안테나에 상부덮개를 여러 층으로 적층함으로써 안테나 성능에 미치는 영향을 분석하였다. 지금까지 원형편파 패치안테나를 설계하기 위해서는 주로 단층의 상부덮개를 적용하거나, 여러 층으로 구성된 하나의 상부덮개를 적용하였고, 성능 분석시 안테나 축비를 거의 고려하지 않았다. 먼저, 상부덮개와 패치안테나 간의 공기층 높이에 의한 중심주파수의 변화를 분석하였다. 공기층 높이가 적을 때는 중심주파수가 낮은 쪽으로 천이하였고, $005{\lambda}_0$의 공기층 높이에서는 주파수 천이가 거의 없었다. 다음은 최적의 공기층 높이를 적용하여 상부덮개의 층수를 증가하면서 안테나 성능을 분석하였다. 상부덮개의 층수가 증가하면서 안테나 이득은 비례적으로 증가하지만, 안테나 축비는 점차적으로 악화되었다. 또한, 상부덮개의 유전체 두께가 증가할수록 안테나 이득은 증가하지만 안테나 축비는 급격히 악화되었다. 결과적으로 안테나 축비를 3dB 이내로 유지하면서 상부덮개의 층수를 확장하여 다양한 이득을 얻을 수 있는 안테나 설계가 가능함을 확인하였다.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1640-1649
• /
• 2001

The present study investigates the effects of various rib arrangements on heat/mass transfer in the cooling passage of gas turbine blades. A complex flow structure occurs in the cooling passage with rib turbulators which promote heat transfer on the wall. It is important to increase not only the heat transfer rates but also the uniformity of heat transfer in the cooling passage. A numerical computation is performed using a commercial code to calculate the flow structures and experiments are conducted to measure heat/mass transfer coefficients using a naphthalene sublimation technique. A square channel (50 mm $\times$ 50 mm) with rectangular ribs (4 mm $\times$ 5 mm) is used fur the stationary duct test. The experiments focus on the effects of rib arrangements and gap positions in the discrete ribs on the heat/mass transfer on the duct wall. The rib angle of attack is 60°and the rib-to-rib pitch is 32 mm, that is 8 times of the rib height. With the inclined rib angle of attack (60°), the parallel rib arrangements make a pair of counter rotating secondary flows in the cross section, but the cross rib arrangements make a single large secondary flow including a small secondary vortex. These secondary flow patterns affect significantly the heat/mass transfer on the ribbed wall. The heat/mass transfer in the parallel arrangements is 1.5 ∼2 times higher than that in the cross arrangements. However, the shifted rib arrangements change little the heat/mass transfer from the inline rib arrangements. The gap position in the discrete rib affects significantly the heat/mass transfer because a strong flow acceleration occurs locally through the gap.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.46-46
• /
• 2002

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.28-30
• /
• 2004

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 추계학술발표회 초록집
• /
• pp.96-96
• /
• 2006

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.96-103
• /
• 2002

The objective of this study is to adjust the roll gap fur the dimension accuracy of bar in hot bar rolling process considering roll wear. In this study hot bar rolling processes fur round and oval passes have been investigated. In order to predict the roll wear, the wear model is reformulated as an incremental from and then wear depth of roll is calculated at each deformation step on contact area using the results of finite element analysis, such as relative sliding velocity and normal pressure at contact area. Archard's wear model was applied to predict the roll wear. To know the effects of thermal softening of DCI (Ductile Cast Iron) roll material according to operating conditions, high temperature micro hardness test is executed and a new wear model has been proposed by considering the thermal softening of DCI roll expressed in terms of the main tempering curve. The new technique developed in this study for adjusting roll gap can give more systematically and economically feasible means to improve the dimension accuracy of bar with full usefulness and generality.