• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.586-592
• /
• 2014

In this paper, high efficiency power management IC(PMIC) with DT-CMOS(Dynamic threshold voltage Complementary MOSFET) switching device is presented. PMIC is controlled PWM control method in order to have high power efficiency at high current level. The DT-CMOS switch with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuit consist of a saw-tooth generator, a band-gap reference(BGR) circuit, an error amplifier, comparator circuit, compensation circuit, and control block. The saw-tooth generator is made to have 1.2MHz oscillation frequency and full range of output swing from supply voltage(3.3V) to ground. The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on current mode PWM control circuits and low on-resistance switching device, achieved the high efficiency nearly 96% at 100mA output current. And Buck converter is designed along LDO in standby mode which fewer than 1mA for high efficiency. Also, this paper proposes two protection circuit in order to ensure the reliability.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.3
• /
• pp.67-78
• /
• 2010

CAS(Conditional Access System) is used in Pay-TV System to prohibit unauthorized user(s) accessing the contents in IPTV broadcasting environment. In the CAS, Smartcard transfers CW which is necessary in the process of descrambling the scrambled program to STB. CW hacking problem is one of the most serious problems in pay-TV system. There have been many researches on generating secure communication channel between smartcard and STB for secure transmitting, But they had problems in efficiency and security. In this paper, we propose a lightweight key agreement protocol based on a symmetric key algorithm. We show that our proposed protocol is more efficient than existing protocols by comparing the amount of computations, and analyzing the security requirement of the proposed protocol.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.295-303
• /
• 2009

The purpose of present study is to examine the effect of guideway characteristics on runnability of low and medium speed maglev vehicle. Dynamic governing equation for 2-dof vehicle and optimal feedback control scheme are developed. And then the effect of vehicle speed, rail roughness, guideway deflection, continuity of spans, each span length on dynamic response of the UTM-01 maglev vehicle are investigated. From the numerical simulation, it is found that the gap between bogie and guideway does not increase greatly within design velocity of the vehicle. The response of vehicle are mostly affected by the guideway deflection rather than rail roughness. As a result of the present study, the runnability of maglev vehicle can be improved by reducing the maximum deflection of guideway and adopting the continuous girder systems.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3074-3079
• /
• 2007

The conventional control valves have been used at the locations occurring high differential pressure and high temperature which causes cavitation, flashing, severe vibration due to abrupt flow change, and sudden pressure drop. Previous studies concerning control valves focused to prevent damage of valve trim due to the internal leak and low flow rate. The newly designed helical trim of control valve has been installed at the location of high pressure change and high temperature in a power plant, and operated for evaluation. It is confirmed that the new control valve developed in this study generates flow characteristics in comparison with previous helical trim of control valves.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.86.1-86.1
• /
• 2010

Cu2ZnSnSe4는 CIS 태양전지의 In 대체 물질계로 주목을 받고 있는 저가형 태양전지 재료로 장차 차세대 태양전지 재료로 응용이 기대되고 있다. 그러나 에너지 밴드갭이 0.9~1.1eV로 다소 낮아 태양전지 광흡수층 재료로 사용하기 위해서는 wide band gab화 처리가 필요하다. 본 연구에서는 CZTSe에 S를 첨가하여 에너지 밴드갭을 확장하고자 하며, S의 첨가가 CZTSe 박막의 특성에 미치는 영향에 대하여 조사하였다. 실험의 편의성을 도모하고자 펄스레이저 법을 사용하여 증착하였다. 박막 조성 제어에는 Cu, Zn, Sn, Se, S 분말을 볼밀로 분쇄, 혼합하여 균질 혼합상 프리커서를 제조하고 이를 Cold Isostatic Press(CIP) 성형하여 Source target을 사용하였다. Pulsed YAG-Laser를 사용하여 soda lime glass상에 증착하고 조성, 구조, 조직을 관찰하고 에너지 밴드갭, 광흡수계수, 면저항, 전하밀도 등 특성을 조사하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.555-560
• /
• 2008

Dynamic interaction analysis between actively controlled Maglev and bridge is carried out. For this, dynamic governing equation for 2-dof Maglev vehicle and optimal feedback control scheme of DOFC are developed. And then the dynamic effect of the 1st natural frequency of bridge, vehicle/bridge mass ratio and damping coefficient of bridge to the both of air-gap variations of UTM-01 maglev vehicle and bridge center maximum displacement response are investigated. From the results of numerical simulation, it is found that the 1st natural frequency of bridge, vehicle/bridge mass ratio and damping coefficient of bridge does not affect greatly within design velocity of the vehicle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.425.2-425.2
• /
• 2016

토카막(TOKAMAK) 장치의 진공용기 및 용기내벽은 플라즈마(Plasma)에 의한 고열과 높은 에너지의 이온 입자들에 항상 노출되어 있는 환경이다. 토카막의 일종인 KSTAR장치의 진공용기는 스테인레스강(STS316)계열의 재질로 이루어져 있고, 플라즈마와 면하는 용기 벽면은 플라즈마에 대해 견딜 수 있도록 그라파이트 타일(graphite tile)로 구성되어 있다. 고에너지의 이온 입자들과 열플럭스(Heatflux)는 용기벽면과 용기를 침식시키고, 또한 이렇게 생겨난 분진(dust)들은 진공용기 내 여기저기를 떠다니게 되고, 플라즈마에 대해서 불순물로서 작용하게 된다. 본 연구에서는 감마분석법으로 플라즈마에 의해 진공용기 내에 집적된 분진들의 구성 성분을 분석하여 주요 출처를 규명할 수 있는 방법을 제시하고, KSTAR 플라즈마의 불순물 제어에 유용하게 활용 할 수 있는 데이터를 제공하여 향후 KSTAR의 고성능 플라즈마 기술개발에 일조할 수 있도록 하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.254-256
• /
• 2008

In recent Year were many devices and facilities developed and manufactured. For guarantee of the property of the devices and facilities needs Vibration protecting Technique and the Technique will be developed more and more. Magneto-Rheological damper is one of the nice devices for reducing of Vibration. In this paper magnetic properties of a MR-damper which is developed for reducing of vibration in display manufacture devices will be analysed at variation different air-gap length and current.

• Publications of The Korean Astronomical Society
• /
• v.6 no.1
• /
• pp.62-75
• /
• 1991

The small sized telescope can be best used if the control and observation can be made remotely and fully automatically by the aid of computers. We discuss the possible ways of automating the existing telescopes of various designs using personal computers. 'We have specifically designed the parts necessary to automate 16 inch Cassegrain Telescope at Pusan University Observatory. The degree of automation we have set for the present work is the interactive. remote observation including opening and shutting down of dome slit. The observational modes we have in mind are photoelectric photometry and CCD imaging. The basic components of the hardware are interface card for 16 or 32 bit IBM PC family of computers, relay switches for the control of telescope movements, stepping motor controller card for the control of observational equipments, and AID converter unit that accepts signal from sensors for the environment conditions such as temperature, wind speeds, precipitation, etc. We also have designed and built a photoelectric photometer that can be fully controlled by the command of a computer. Such observational equipment is also essential in order that the remote observation can be realized.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.202-211
• /
• 2005

This paper introduces and illustrates the results of a new method fer offsetting triangular mesh by moving all vertices along the multiple normal vectors of a vertex. The multiple normal vectors of a vertex are set the same as the normal vectors of the faces surrounding the vertex, while the two vectors with the smallest difference are joined repeatedly until the difference is smaller than allowance. Offsetting with the multiple normal vectors of a vertex does not create a gap or overlap at the smooth edges, thereby making the mesh size uniform and the computation time short. In addition, this offsetting method is accurate at the sharp edges because the vertices are moved to the normal directions of faces and joined by the blend surface. The method is also useful for rapid prototyping and tool path generation if the triangular mesh is tessellated part of the solid models with curved surfaces and sharp edges. The suggested method and previous methods are implemented on a PC using C++ and illustrated using an OpenGL library.