• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.930-936
• /
• 2003

A new method of direct current motor drive, which requires neither shaft encoder nor speed estimator, is presented. The proposed scheme is based on decreasing current gap between a numerical model and an actual motor. By supplying the identical instantaneous voltage to both model and motor in the direction of reducing the current difference, the rotor approaches to the model speed, that is, reference value. The performance of direct current motor drives without speed sensor is generally poor at very low speed. However, in this system, it is possible to obtain good speed performance in the low speed range.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1182-1194
• /
• 2004

This paper addresses the application of an active magnetic bearing (AMB) system to levitate the elevation axis of an electro-optical sight mounted on a moving vehicle. In this type of system, it is desirable to retain the elevation axis in an air-gap between magnetic bearing stators while the vehicle is moving. To eliminate disturbance responses, a disturbance observer based sliding mode control is developed. This control can decouple disturbance observation dynamics from sliding mode dynamics and preserves the robustness of the sliding control. The sliding surfaces are designed in the consideration of scattering of received image. The proposed control is applied to a 2-DOF active magnetic bearing system subject to base motion. Along with experimental results, the feasibility of the proposed technique is illustrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.165-170
• /
• 1992

In this paper, the Hardware-In-The-Loop Simulation(HILS) of missile systems are studied. The HILS is an effective performance evaluation technique that bridges the simulation fidelity gap between analytic all-digital simulations and actual flight tests of missile systems. The HILS may be required to perform system integration tests, performance evaluation at system or subsystem level. Major elements of this HILS facility will include the flight table, simulation computers, I/O computer and peripheral equipments. HILS of missile systems typically involve computer modeling of flight dynamics coupled with a hardware guidance and control(G/C) systems. This paper describes a real time performance evaluation technique of a G/C system, Development of a HILS for a Autopilot of SAM G/C will be used as an example.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.200-208
• /
• 1996

This paper describes the mechanism, guidance, sensor system, and navigation algorithm of METRO, a free ranging mobile robot. METRO is designed for use in structured surroundings or factory environments rather than unstructured natural environments. An overview of the physical configuration of the mobile robot is presented as well as a description of its sensor system, an omnidirectional laser range finder. Except for the global path planning algorithm, a guidance and a navigation algorithm with a local path planning algorithm are used to navigate the mobile robot. In METRO the computer support is divided into a supervisor with image processing and local path planning and a slave with motor control. The free ranging mobile robot is self-controlled and all processing being performed on board.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.787-793
• /
• 1999

A self-sensing magnetic suspension system utilizing a LC resonant circuit is proposed by using the characteristic that the inductance of the magnetic system is varied with respect to the air gap displacement. An external capacitor is added into the electric system to make the levitation system be statically stable system, which much relieves the control effort required to stabilize the magnetic suspension system of haying an intrinsic unstable nature. For the realization of the self- sensing magnetically levitated system, an amplitude modulation / demodulation method is used with a positive position feedback controller Experimental results are presented to validate the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.896-901
• /
• 1990

A simulation analysis is presented for the position control of a single-link flexible manipulator whose end-effector is subjected to an impulsive force. Arm is rotated by a d.c. servomotor at the shoulder so that the end point stays precisely at its initial position even if the end effector is thumped with the impulsive loading. A gap sensor is used to measure the tip displacement. The control torque based on the PD control law is applied to the motor through the driver circuit. The control strategy is tested by means of computer simulation for the one-link flexible-arm prototype in the authers' laboratory at Tohoku Univ.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.439-448
• /
• 2004

Magnetic bearing is an attractive device in precision engineering field because of its non-contacting nature and controllability of its dynamic characteristics. This paper provides a method of designing a sliding mode control for an active magnetic hearing(AMB) system which is used to support the elevation axis of a target tracking sight instead of mechanical bearings to eliminate the effect of mechanical friction. In such system, the axis should be levitated and supported within a predetermined air gap while AMB is excited by base motion. Experimental results showed that the sliding mode control is effective in disturbance rejection than conventional PID-control without any additive measurements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.508-512
• /
• 2013

In recent years, sensorless drive schemes have been proposed widely and most of them are based on the ZCP (Zero Crossing Point) detection of the BEMF (Back Electro-Motive Force). These schemes have two main problems. One is that ZCP may not be detected at low speed and thus a forced drive is required. The other problem is that there is $30^{\circ}$ phase difference between ZCP and the motor commutation instant and to ensure proper operation, this gap should be accounted for. To solve these problems a circuit is devised for detecting ZCP of the BEMF difference through the line voltage difference. Experimental results show that the output of this circuit is identical to that of the Hall sensor signal, and velocity control of a BLDC motor is possible without the sensor.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.298-303
• /
• 2004

The active magnetic bearing system for a TMP consists of four couples of magnets, five gap sensors with its amplifiers and a digital PID controller. For stabilizing and providing damping, digital PID controller is applied for each control axes and the inter-axis cross feedback controller is also applied to suppress low frequency vibration caused by gyroscopic moment of the rotor. Therefore in this paper, a digital controller of magnetic bearing for a TMP is design and examined.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.298-298
• /
• 2000

This paper presents the optimization technique to analyze the effect of the design parameters of rapid prototyping system for human brain model fabrication. The optimization method considers the functional relationships among the design parameters such as thickness gap, shrink rate, and laser speed that govern the operation of fabrication system. This paper applies a discrete optimization technique as the optimization method to determine the dominant parameter values. Additional study includes manner of complement surface image of ellipse which approximates the brain model using the adaptive slicing and the offset contour. According to the parameters tuning and interaction of effect, more suitable parameter values can be obtained by enhanced 3D brain model fabrication.