• 설비공학논문집
• /
• 제28권5호
• /
• pp.208-215
• /
• 2016

This study was conducted to improve the performance of low-temperature vacuum dryer by applying desiccant to cold trap. Performance evaluation was carried out using several desiccants. The amounts of absorption and diffusivity were measured based on analytic model. Results of desiccant performance evaluation revealed that silica-gel had the most excellent performance for conditions of low-temperature vacuum drying process. Silica-gel was applied to cold trap for evaluating the drying performance. The experiment results showed that the drying time was extended as the thickness of sample was increased due to increased heat and mass transfer resistance of drying sample. In addition, as heating plate temperature was increased, drying time was decreased due to increased evaporation pressure of drying sample. Furthermore, drying time with desiccant was decreased approximately 20% than that without desiccant.

• Journal of Radiation Protection and Research
• /
• 제7권1호
• /
• pp.49-55
• /
• 1982

유기중합체의 열자극전류는 방사선량측정기로서 사용가능한 특성을 갖고있으며 중합체의 구성성분이 생체조직과 등가성분이므로 의학 및 생물학분야에서 효과적인 방사선 측정기구로 이용할 수 있었다. 포리에틸렌등 중합체에 방사선을 조사한후 $10{\sim}100V$의 전압과 실온에서 $100^{\circ}C$까지의 온도에 따라 열자극 전류를 측정하고 분석함으로서 물질의 에너지상수($0.8{\sim}1.0eV$)와 방사선피폭량(수Krands)에 따른 열자극전류($10^{-2}{\sim}10^{-4}{\mu}A$)의 상호관계를 계측할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.341-344
• /
• 2002

A matched asymptotic analysis is conducted for a compressible rotating flow in a cylindrical container when a mechanical and/or a thermal disturbance is imposed on the wall. The system Ekman number is assumed to be very small. The conditions for the Taylor-Proudman column in the interior, which were also given in the companion paper Park & Hyun, 2002) by means of the energy balancing analysis, have been re-derived. The concept of the variable, the energy content $e[{\equiv}T+2 {\alpha}^2 {\gamma}{\nu}]$, is reformulated, and its effectiveness in characterizing the energy transport mechanism is delineated. It is seen that, under the condition of the Taylor-Proudman column, numerous admissible theoretical solutions for interior flow exist with an associated wail boundary condition. Some canonical examples are illustrated with comprehensive physical descriptions. The differential heating problem on the top and bottom endwall disks is revisited by using the concept of the energy content. The results are shown to be in line with the previous findings.

• Journal of Dairy Science and Biotechnology
• /
• 제31권1호
• /
• pp.67-73
• /
• 2013

Food allergy is defined as adverse reactions toward food mediated by aberrant immune mechanisms. Cow's milk allergy is one of the most common food allergies in childhood. This allergy is normally outgrown in the first year of life, however 15% of allergic children remain allergic. Cow's milk allergy seem to be associated with casein (${\alpha}_{s1}$-CN), ${\beta}$-lactoglobulin and whey protein. In addition to this, many other milk proteins are antigenic and capable of inducing immune responses. Various food processing affects the stability, structure and intermolecular interactions of cow milk proteins, as a result reduction the allergenic capacity. Heating, hydrolysis, chemical, proteolytic and other processes such as gamma-ray irradiation, high pressure, using probiotics treatments of milk to obtain hypoallergenic milk have been developed to reduce allergic reactions.

• Fisheries and Aquatic Sciences
• /
• 제17권3호
• /
• pp.299-304
• /
• 2014

The objective of this study was to elucidate the physicochemical characteristics of gelatin extracted from jellyfish Rhopilema hispidum. We investigated the proximate composition, amino acids, gel strength, gelling/melting points, dynamic viscoelastic properties, and viscosity of jellyfish gelatin. Jellyfish gelatin contained 12.2% moisture, 1.5% lipid, 2.1% ash, and 84.8% protein. Glycine, hydroxyproline, proline, and alanine were the predominant amino acids. The gelatin showed a gel strength of 31.2 kPa, a gelling point of $18.0^{\circ}C$, and melting point of $22.3^{\circ}C$. The gelatin was composed of ${\alpha}_1$-chain, ${\alpha}_2$-chain, ${\beta}$-chain, and ${\gamma}$-chain. During cooling and heating process, jellyfish gelatin showed lower elastic modulus (G') and loss modulus (G") values than mammalian gelatin. Jellyfish gelatin did not show superior rheological properties to mammalian gelatin, like other fish gelatin; however, it can be used in various food and cosmetic products not requiring high gel strength.

• Food Science and Biotechnology
• /
• 제16권6호
• /
• pp.1051-1054
• /
• 2007

An edible wild perennial plant with extremely potent antimicrobial activity was found and identified as apiifolia Virgin's Bower (Clematis apiifolia DC) which is easily found around wet wildernesses. Fresh fruit extract of C. apiifolia exhibited minimum inhibitory concentrations (MIC) in the vicinity of 0.1% against various yeasts and of less than or equal to 0.4% for non-lactic acid bacteria. MICs against lactic acid bacteria were about 2.0%. The antimicrobial activity of C. apiifolia fruit was even more potent than that of garlic which has been known for its potent antimicrobial activity. The principal antimicrobial compound of fruit extract of C. apiifolia was isolated and identified by high performance liquid chromatography and gas chromatography as protoanemonin (a gamma lactone of 4-hydroxy-2,4-pentadienoic acid). The antimicrobial activity of C. apiifolia was stable at high temperatures, and the activity was maintained after heating at $121^{\circ}C$ for 10 min. The antimicrobial compound of C. apiifolia was supposed to inhibit microorganisms by reacting with sulfhydryl groups of cellular proteins.

• 열처리공학회지
• /
• 제24권5호
• /
• pp.251-261
• /
• 2011

The changes in microstructure and texture during annealing were examined in a series of 0.015% C-1.5% Mn cold-rolled sheet steels with 0~0.5% Mo. Orientation distribution function data were calculated from the (110), (200), (211) pole figures determined on the rolled plane of cold-rolled and annealed steel sheets. Regardless of Mo content and annealing conditions, martensite volume fraction was less than 1.0%, not affecting the texture evolution. Textural change at the cooling stage after heating at $820^{\circ}C$ for 67 sec was not observed. Increasing the Mo content and annealing temperature markedly strengthened the intensities of ${\gamma}$-fiber texture, resulting in the increase in $r_m$ value. The desirable texture evolution for deep drawability in the 0.5% Mo steel may be mainly caused by the grain refining effect of Mo carbide in the hot-rolled steel sheet.

• 한국작물학회지
• /
• 제58권1호
• /
• pp.67-70
• /
• 2013

This research study was to develop methods for inhibiting the germination of cotton seeds. Germination rates after heating treatment at $80^{\circ}C$ with 10, 20, 30, 40 min. were 9.3, 9.3, 5.3 and 1.3 percentage, respectively. Heat treatment over $85^{\circ}C$ with 10 min. caused no germination of cotton seeds. Germination was significantly reduced with gamma rays treatment more than 10,000 gy, while the treatment within 2,000-8,000 gy induced less effects. Microwave processing for 30 seconds and 60 seconds inhibit the germination of cotton seed under 8 and 0%, respectively. As a physical treatment, rollmill milling with 1.5, 2, 2.5 mm gap inhibited any germination of cotton seeds. The optimum gap of roll-mill for processing physical cracking was below 51% of the thickness of seed.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2670-2689
• /
• 2022

STREAM - a lattice transport calculation code with method of characteristics for the purpose of light water reactor analysis - has been developed by the Computational Reactor Physics and Experiment laboratory (CORE) of the Ulsan National Institute of Science and Technology (UNIST). Recently, efforts have been taken to develop a photon module in STREAM to assess photon heating and the influence of gamma photon transport on power distributions, as only neutron transport was considered in previous STREAM versions. A multi-group photon library is produced for STREAM based on the ENDF/B-VII.1 library with the use of the library-processing code NJOY. The developed photon solver for the computation of 2D and 3D distributions of photon flux and energy deposition is based on the method of characteristics like the neutron solver. The photon library and photon module produced and implemented for STREAM are verified on VERA pin and assembly problems by comparison with the Monte Carlo code MCS - also developed at UNIST. A short analysis of the impact of photon transport during depletion and thermal hydraulics feedback is presented for a 2D core also from the VERA benchmark.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.80-99
• /
• 2023

This paper presents the results of investigating the change in welding residual stresses of the core shroud, which is one of subcomponents in reactor vessel internals, performing finite element analysis. First, the welding residual stresses of the core shroud were calculated by applying the heat conduction based lumped pass technique and finite element elastic-plastic stress analysis. Second, the temperature distribution of the core shroud during the normal operation was calculated by performing finite element temperature analysis considering gamma heating. Third, through the finite element viscoelastic-plastic stress analysis using the calculated temperature distribution and setting the calculated residual stresses as the initial stress state, the variation of the welding residual stresses was derived according to repeating the normal operation. In the viscoelastic-plastic stress analysis, the effects of neutron irradiation on mechanical properties during the cyclic normal operations were considered by using the previously developed user subroutines for the irradiation agings such as irradiation hardening/embrittlement, irradiation-induced creep, and void swelling. Finally, the effect of neutron irradiation on the welding residual stresses was analysed for each irradiation aging. As a result, it is found that as the normal operation is repeated, the welding residual stresses decrease and show insignificant magnitudes after the 10^th refueling cycle. In addition, the irradiation-induced creep/void swelling has significant mitigation effect on the residual stresses whereas the irradiation hardening/embrittlement has no effect on those.