• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.625-630
• /
• 2000

In this paper, the governing equation and the boundary conditions of deploying rods are derived by using Hamilton's principle. The Galerkin method using the comparison function of the instantaneous natural modes is adopted by which the governing equation is discretized. Based on the discretized equations, the time integration analysis is performed and the longitudinal vibrations for the deploying and the retrieving velocity are analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.71-77
• /
• 1999

Exact forward modeling of acoustic propagation is crucial in MFP such as inverse problems and various other acoustic applications. As acoustic propagation in shallow water environments become important, range dependent modeling has to be considered of which PE method is considered as one of the most accurate and relatively fast. In this paper higher order numerical rode employing the PE method is developed. To approximate the depth directional operator, Galerkin's method is used with partial collocation to lessen necessary calculations. Linearization of tile depth directional operator is achieved via expansion into a multiplication form of (equation omitted) approximation. To approximate the range directional equation, Crank-Nicolson's method is used. Final1y, numerical self stater is employed. Numerical tests are performed for various occan environment scenarios. The results of these tests are compared to exact solutions, OASES and RAM results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.427-436
• /
• 2000

This study presents the nonlinear responses of a hinged-clamped beam under broadband random excitation. By using Galerkin's method the governing equation is reduced to a system or nonautonomous nonlinear ordinary differential equations. The Fokker-Planck equation is used to generate a general first-order differential equation in the joint moments of response coordinates. Gaussian and non-Gaussian closure schemes are used to close the infinite coupled moment equations. The closed equations are then solved for response statistics in terms of system and excitation parameters. The case of two mode interaction is considered in order to compare it with the case of three mode interaction. Monte Carlo simulation is used for numerical verification.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.806-812
• /
• 1999

Dynamic behaviors are analyzed for a flexble spinning disk with angular acceleration, considering geometric nonlinearity. Based upon the Kirchhoff plate theory and the von Karman strain theory, the nonlinear governing equations are derived which are coupled equations with the in-plane and out-of-planedisplacements. The governing equations are discretized by using the Galerkin approximation. With the discretized nonlinear equations, the time responses are computed by using the generalized-$\alpha$ method and the Newton-Raphson method. The analysis shows that the existence of angular acceleration increases the displacements of the spinning disk and makes the disk unstable.

• Journal of KSNVE
• /
• v.11 no.3
• /
• pp.437-442
• /
• 2001

In this study, the fracture phenomena of optical disks are discussed by theoretical and experimental approaches and then some recommendations are presented to prevent the fracture. Linear equations of motion are discretized by using the Galerkin approximation. From the discretized equations, the dynamic responses are computed by the generalized- time integration method. As a fracture criterion for optical disks, the critical crack length is presented. From experimental methods, the fracture procedure is analyzed. The fracture occurs when disks have crack on the inner radius of the disks. Since the crack growth and the fracture result from the stress concentration on the tip of the crack, a measure should be taken to overcome the stress concentration. This problem can be resolved by the structural modification of a disk. This study proposes 3 types of improved optical disks.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.907-910
• /
• 1999

본 논문에서는 고 농도로 불순물이 주입된 영역에서 전자 및 정공 농도를 정교하게 구현하기 위해 Fermi-Dirac 분포함수를 고려한 포아송 방정식의 이산화 방법을 제안하였다. Fermi-Dirac 분포를 근사시키기 위해서 Least-Squares 및 점근선 근사법을 사용하였으며 Galerkin 방법을 근간으로 한 유한 요소법을 이용하여 포아송 방정식을 이산화하였다. 구현한 모델을 검증하기 위해 전력 BJT 시료를 제작하여 자체 개발된 소자 시뮬레이터인 BANDIS를 이용하여 모의 실험을 수행한 결과, 상업용 2차원 소자 시뮬레이터인 MEDICI에 비해 최대 4%이내의 상대 오차를 보였다.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.339-344
• /
• 2000

In this study, the fracture phenomena of optical disks are discussed and then some recommendations are presented to prevent the fracture. The fracture occurs when disks have crack on the inner radius of the disks. Since the crack growth and the fracture result from the stress concentration on the tip of the crack, a measure should be taken to overcome the stress concentration. This problem can be resolved by the structural modification of a disk. This study proposes 3 types of improved optical disks, which are robust to the disk fracture due to the high spinning speed of a disk. The first type is a disk reinforced by wire rings, the second type is a disk added by texture fibers, and the third type is a rubber-coated disk.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.439-451
• /
• 2008

Based on reflected and transmitted waves by a single step bottom, a new model of scatterer method is constructed which can be used to calculate wave transformation over a multi-step topography. The approximate results are tested by comparison with the more accurate results obtained from EFEM presented by Kirby and Dalrymple(1983). In the case of plane-wave approximation, solutions of the scatterer method and the EFEM are the same. Results obtained by the scatterer method with non-propagating modes are much better, in terms of phase for the calculated reflection and transmission coefficients, than those by plane-wave approximation. As the effect of non-propagating modes decreases, solutions of the scatterer method become closer to those of the EFEM.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.34-41
• /
• 2003

A Green's function approach is adopted for analyzing the thermoelastic deformation and stress analysis of a plate made of functionally graded materials (FGMs). The solution to the 3-dimensional steady temperature is obtained by using the laminate theory. The fundamental equations for thermoelastic problems are derived in terms of out-plane deformation and in-plane force, separately. The thermoelastic deformation and the stress distributions due to the bending and in-plane forces are analyzed by using a Green’Às function based on the Galerkin method. The eigenfunctions of the Galerkin Green's function for the thermoelastic deformation and the stress distributions are approximated in terms of a series of admissible functions that satisfy the homogeneous boundary conditions of the rectangular plate. Numerical examples are carried out and effects of material properties on thermoelastic behaviors are discussed.

• Journal for History of Mathematics
• /
• v.18 no.4
• /
• pp.49-66
• /
• 2005

Finite element Methods(FEM) have been the primary computational methodologies in science and engineering computations for more than half centuries. One of the main limitations of the finite element approximations is that they need mesh which is an artificial constraint, and they need remeshing to solve in some special problems. The advantages in meshfree Methods is to develop meshfree interpolant schemes that only depends on particles, so they relieve the burden of remeshing and successive mesh generation. In this paper we describe the development of meshfree particle Methods and introduce the numerical schemes for Smoothed Particle hydrodynamics, meshfree Galerkin Methods and meshfree point collocation mehtods. We discusse the advantages and the shortcomings of these Methods, also we verify the applicability and efficiency of Meshfree Particle Methods.