• 제목/요약/키워드: Galerkin방법

검색결과 166건 처리시간 0.033초

보의 폭 전체에서 발생된 열린 균열을 갖는 외팔보의 손상모델에 관한 연구 (A Study about the Damage Model of a Cantilever Beam with Open Crack Generated in Whole Breadth of the Beam)

  • 허영철;김재관;박성환
    • 한국소음진동공학회논문집
    • /
    • 제17권10호
    • /
    • pp.936-945
    • /
    • 2007
  • We studied the influences of open cracks in free vibrating beam with rectangular section using a numerical model. The crack was assumed to be single and always open during the free vibration and equivalent bending stiffness of a cracked beam was calculated based on the strain energy balance. By Galerkin's method, the frequencies of cantilever beam could be obtained with respect to various crack depths and locations. Also, the experiments on the cracked beams were carried out to find natural frequencies. The cracks were initiated at five locations and the crack depths were increased by five steps at each location. The experimental results were compared with the numerical results and the comparison results were discussed.

Element-free Galerkin 방법을 이용한 적응적 균열진전해석 (Adaptive Crack Propagation Analysis with the Element-free Galerkin Method)

  • 최창근;이계희;정흥진
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.84-91
    • /
    • 2001
  • In this study, the adaptive analysis procedure of crack propagation based on the element-free Galerkin(EFG) method is presented. The adaptivity analysis in quasi-static crack propagation is achieved by adding and/or removing the node along the background integration cell that are refined or recovered according to the estimated error. These errors are obtained basically by calculating the difference between the values of the projected stresses and original EFG stresses. To evaluate the performance of proposed adaptive procedure, the crack propagation behavior is investigated for several examples. The results of these examples show the efficiency and accuracy of proposed scheme in crack propagation analysis.

  • PDF

이동 하중의 질량효과를 고려한 보의 동적응답 (Dynamic Response of a Beam Including the Mass Effect of the Moving Loads)

  • 최교준;김용철
    • 대한기계학회논문집
    • /
    • 제15권1호
    • /
    • pp.61-68
    • /
    • 1991
  • 본 연구에서는 스프링힌지, 클램프, 단순지지, 탄성지반, 다수의 병진 및 회 전스프링 그리고 중간지지점의 조합으로 구성되어 있는 보에 대하여 우선 Hamilton원 리에 의하여 정확한 보의 특성방정식을 유도하고 모든 경계조건을 만족하는 직교다항 식을 구한 후, 스프링, 댐퍼로 구성된 여러개의 질량이 일정한 속도로 이동할 경우에 대하여 Galerkin방법과 수치적분 방법을 사용하여 동적응답을 구하였다. 또한 구속 조건 및 경계조건이 변함에 따라 동적응답에 미치는 영향을 연구하였다.

저면난류경계층(底面亂流境界層)의 저질이동특성(底質移動特性) (On the Sediment Transport Characteristics of the Bottom Turbulent Boundary Layer)

  • 김남형;키요시 타키카와
    • 대한토목학회논문집
    • /
    • 제13권2호
    • /
    • pp.267-277
    • /
    • 1993
  • 본 논문에서는 유한요소법을 2차원 난류경계층에 적용하였으며, 점성유체의 시간의존 비압축성 운동을 시간과 압력장(場)에서 Navier-Stokes방정식과 vorticity방정식을 이용하여 정식 화하였다. 수치계산방법은 Galerkin방법에 기초하였으며, 난류 경계층의 eddy kinematic viscosity에 대해서는 Prandtl의 혼합거리이론을 도입하였다. 난류 경계층에서 파동에 의한 임의 저면에서 저질의 이동을 수치계산하였다. 유한 요소법에 의해 얻어진 결과는 진동흐름에 의한 경계층과 파동에 의한 경계층에서의 특성의 차이를 분명히 하였다.

  • PDF

확장형 Boussinesq 방정식의 유한요소모형 개발 (Development of Finite Element Method for the Extended Boussinesq Equations)

  • 우승범;최영광;윤병일
    • 한국해양학회지:바다
    • /
    • 제12권3호
    • /
    • pp.133-141
    • /
    • 2007
  • 장파와 단파의 거동을 동시에 모의할 수 있는 확장형 Boussinesq 방정식에 대한 유한요소모형을 개발하였다. 3차 공간 미분항을 처리하기 위한 추가변수를 도입하고 Galerkin 가중잔차방법을 적용하여 모형을 수립하였으며, 시간적분방법으로 Adams-Bashforth-Moulton Predictor Corrector 기법을 적용하여 비물리적인 수치분산이나 수치소산 현상을 줄일 수 있도록 하였다. 이 개발된 모형을 검증하기 위해 고립파가 전파하는 문제에 적용을 하였다. 개발된 모형을 적용한 결과 이론해 또는 수리실험 결과에 매우 양호한 일치를 보였다.

무요소 계산법의 발전과 전개 (Development of meshfree particle Methods)

  • 이진호
    • 한국수학사학회지
    • /
    • 제18권4호
    • /
    • pp.49-66
    • /
    • 2005
  • 유한요소법(Finite Element Methods)은 지난 수십 년 동안 다양한 공학문제를 해석하는 주요 수치해석기법으로서, 지속적으로 연구$\cdot$개발되어 오늘에 이르고 있다. 그러나, 유한요소법은 계산을 위하여 요소망을 구성해야 하고 일부의 문제에 대하여서는 요소망을 재구성하는 등 특별한 처리기법과 계산의 소요가 필요하다. 이와같은 단점을 극복하기 위하여 무요소법(Meshfree Methods)이라 불리우는 일단의 수치해석 기법들이 고안되었다. 무요소법은 요소를 사용하지 않고 절점(node)만을 이용하여 함수를 근사하는 수치해석기법이다. 본 논문에서는 무요소법이 고안된 배경과 그 연산구조를 소개하고 무요소법의 대표적인 방법들인 Smoothed Particle Hydrodynamics(SPH)방법, 무요소 갤러킨 방법(Meshfree Galerkin Methods) 그리고 무요소 선점법(Meshfree Point Collocation Methods)의 기본 개념과 이들 수치해석기법의 방법론을 알아본다. 그리고 이들 방법의 장단점과 그 적용 예를 통하여 무요소 계산법의 유효함을 보인다.

  • PDF

반해석적 방법에 의한 작은 변위를 가지는 얇은판의 자유진동해석 (Free Vibration of a Thin Plate with Small Deflections by Semi-Analytical Approach)

  • 최덕기
    • 대한기계학회논문집
    • /
    • 제18권8호
    • /
    • pp.1967-1973
    • /
    • 1994
  • The free vibration of a thin plate with three different boundary conditions is discussed in this paper. A semi-analytical approach to the plate problems has been exploited using computer algebra system(CAS). The approximate solutions are assumed as algebraic polynomials that satisfy the appropriate boundary conditions. In order to solve problems, Galerkin method is used, which is known as an ineffective tool for practical engineering problems, being involved with a large number of multiple integration and differentiation. All the admissible functions used in this paper are generated automatically by CAS otherwise a tedious algebraic manipulations should be done by hand. One, six and fifteen-term solutions in terms of frequency parameters are presented and compared with exact solutions. Even using one-term solution, the comparison with existing data shows good agreement and accuracy of the present method.

경사기능재료 사각 판의 비정상 열 탄생변형과 응력해석 (Unsteady Thermoelasic Deformation and Stress Analysis of a FGM Rectangular Plate)

  • 김귀섭
    • 한국항공우주학회지
    • /
    • 제32권8호
    • /
    • pp.91-100
    • /
    • 2004
  • 경사기능재료 판에 대한 열탄성 변형과 응력 해석을 위해 Green 함수 방법이 채택되었다. 3 차원 비정상 온도분포에 대한 해는 적층판 이론에 의해 얻어진다. 열탄성 문제에 대한 기본 방정식은 각각 평면외 (out-plane) 변형과 평면내 (in-plane) 힘에 의해 유도되었다. 굽힘과 평면내 힘에 의한 열탄성 변형과 응력분포는 Galerkin 방법에 근거한 Green 함수를 이용하여 해석하였다. 열탄성 변형과 응력분포 해석을 위한 Galerkin Green 함수의 특성함수들은 사각판의 제차 경계조건을 만족시키는 허용함수들의 급수 형태로 근사화되었다. 단수지시된 사각 판에 대한 수치해석이 수행되었으며, 정사기능재료의 물성치가 판의 비정상 열탄성 거동에 미치는 영향이 검토되었다.

Fourier-Galerkin Moment Method를 이용한 접지된 2개 유전체층 위의 완전도체띠 격자구조에 의한 TE 산란의 해 (Solution of TE Scattering by a Perfectly Conducting Strip Grating Over the Grounded Two Dielectric Layers Applying Fourier-Galerkin Moment Method)

  • 윤의중
    • 한국항행학회논문지
    • /
    • 제16권4호
    • /
    • pp.635-640
    • /
    • 2012
  • 본 논문에서는 접지된 2개의 유전체층 위의 도체띠 격자구조에 의한 TE (Transverse Electric) 산란문제를 도체경계조건과 수치해석 방법인 FGMM (Fourier-Galerkin Moment Method)를 적용하여 해석하였으며, 이 때 유도되는 표면전류밀도는 미지의 계수와 단순한 함수인 지수함수의 곱의 급수로 전개하였다. 전반적으로, 제안된 구조에서 영역-2의 유전체층의 비유전율 ${\epsilon}_{r2}$과 유전체 층의 두께 $t_2$가 증가함에 따라 반사전력이 증가하였다. 반사전력의 급변점들은 공진효과에 기인한 것으로 과거에 wood's anomaly라고 불리워졌으며, 수치계산 결과들은 기존 논문의 결과들과 일치하였다.

불규칙 가진되는 회전-고정보의 비선형응답특성 (Nonlinear Responses of a Hinged-Clamped Beam under Random Excitation)

  • 조덕상;김영종
    • 한국전산구조공학회논문집
    • /
    • 제13권4호
    • /
    • pp.427-436
    • /
    • 2000
  • 이 논문은 불규칙 가진력을 받는 회전-고정보의 비선형 응답특성을 나타낸다. 불규칙 가진력은 두 번째 고유모드의 절점과 최대변위점에 가했다. 비선형 편미분 방정식과 경계조건으로 표현되는 이 문제를 Galerkin의 방법을 이용하여 연립 비선형 상미분방정식으로 변환하였다. 이 상미분방정식으로부터 Fokker-Planck방정식과 모멘트 방정식을 얻은 후 Gaussian closure 방법 및 non-Gaussian closure 방법을 이용하여 3 모드 근사시 각각 27개 및 209개의 자율 상미분방정식을 구하였다. Gaussian closure 방법과 non-Gaussian closure 방법으로 2 모드 및 3 모드 근사해석을 수행하였고 해석적 결과들은 Monte Carlo 시뮬레이션 결과와 비교되었다. 해석결과 2 모드 근사해와 3 모드 근사해가 거의 일치하였고 2 모드 내부공진만 고려하여도 해석결과에 별 영향을 주지 않는다는 것을 알 수 있다.

  • PDF