• The KSFM Journal of Fluid Machinery
• /
• v.18 no.1
• /
• pp.59-64
• /
• 2015

The pitch control system in wind turbines becomes more and more important as the wind turbines are larger in multi-MW size. PI controller has been applied in most pitch controllers and it has been known that gain-scheduling is essential for pitch control of wind turbines. A demo model of 2 MW wind turbine which represents the whole dynamics of wind turbine including dynamic behaviors of blade, tower and rotational shaft is given in the commercial Bladed S/W for real wind turbines. In this paper, some results on step responses of the pitch PI controller and effectiveness of gain-scheduled pitch PI controller are presented through the Bladed S/W for the 2 MW wind turbine.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.129.4-129
• /
• 2001

The looper control of hot strip finishing mill is one of the most important control item in hot strip rolling mill process. Loopers are placed between finishing mill stands and control the mass flow of the two stands. Another important action of the looper is to control the strip tension which influences on the width of the strip. So it is very important to control both the looper angle and the strip tension simultaneously but the looper angle and the strip tension are strongly interacted by each other. There are many control schemes such as conventional, non-interactive, LQ(Linear Quadratic), Hinf and ILQ(Inverse Linear Quadratic), Adaptive(gain scheduling) control in the looper control system. In this paper, we present the modeling for the looper of a hot strip finishing mill to control the tension of the strip and suggest another control method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.3
• /
• pp.318-324
• /
• 2014

Recent years have witnessed a growing demand for a wide variety of high-performance industrial robots. In this paper, for accurate gain tuning of a 6-axis articulated industrial robot with reduced noise, a program routine for a dynamic signal analyzer (DSA) using the frequency response method will be programmed using $LabVIEW^{(R)}$. Then, robot transfer functions can be obtained experimentally using the frequency response method with the DSA program. Data from the robot transfer functions are transformed into Bode plots, based on which an optimal gain tuning will be executed. Gain tuning can enhance the response quality of the output signal for a given input signal during real-time control of the robot. The effectiveness of our proposed technique will be verified by implementation with a (lab-manufactured) 6-axis articulated industrial robot (hereinafter called "RS2") and comparison with the zero position gain tuning, as well as other positions.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.369-375
• /
• 2006

This paper describes a simple proportional and integral control algorithm for a swirl motor controller and its application. The control algorithm may be complicated in order to have desired performance, such as low steady state errors, fast response time, and relatively low overshoot. At the same time, it should be compact so that it can be easily implemented on a low cost microcontroller, which has no floating-point calculation capability and low computing speed. These conflicting requirements are fulfilled by the proposed control algorithm which consists of a gain scheduling proportional controller and an anti-windup integral controller. The mechanical friction, which is caused by gears and a return spring, varies very nonlinearly according to the angular position of the system. This nonlinear static friction is overcome by the proportional controller, which has a two-dimensional look up gain table. It has error axis and angular position axis. The integral controller is designed not only to minimize the steady state error but also to avoid the windup effect, which may be caused by the saturation of a motor driver. The proposed control algorithm is verified by use of a commercial product to prove the feasibility of the algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.355-360
• /
• 1991

A method of autopilot gain-scheduling is presented for missiles which have heavy aerodynamic coupling between pitch and yaw channels due to high maneuverability. Pitch and yaw, autopilot are cross-coupled, and their feedback gains are scheduled by total acceleration and bank angle for given Mach number and height. Bank angle information is obtained by using a simple estimator. By computer simulation, it is shown that the proposed method is superior to other existing methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1051-1059
• /
• 1992

Two types of digital repetitive control systems are analyzed and designed to reduce the error spectrum including not only harmonic but also non-harmonic components. First, a novel gain scheduling algorithm is suggested for conventional and modified repetitive controller is scheduled to reduce the infinite norm of error in frequency domain. For this, the relative error transfer function is mewly defined as the ratio of the error spectrum for the system with a repetitive controller to the error spectrum for the system with a repetitive controller to the error spectrum for the system without a repetitive controller. Secondly, as an alternative of a repetitive control system with the gain scheduling, a repetitive control system with higher order repetitve function is analyzed and designed, where instead of equal weightings, weightings of the higher order repetitive function is determined in such a way that the infinite norm of relative error transfer function is minimized. To show the validities of proposed methods, computer simulation results are illustrated for a typical disk drive head positioning servo system.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.102-112
• /
• 2017

Many studies on dynamic positioning control algorithms using fixed feedback gains have been carried out to improve station keeping performance of dynamically positioned vessels. However, the control algorithms have disadvantages in that it can not cope with changes in environmental disturbances and response characteristics of vessels motion in real time. In this paper, the Fuzzy Gain Scheduling - PID(FGS - PID) control algorithm that can tune PID gains in real time was proposed. The FGS - PID controller that consists of fuzzy system and a PID controller uses weighted values of PID gains from fuzzy system and fixed PID gains from Ziegler - Nichols method to tune final PID gains in real time. Firstly, FGS - PID controller, control allocation algorithm, FPSO and environmental disturbances were modeled using Matlab/Simulink to evaluate station keeping performance of the proposed control algorithm. In addition, simulations that keep positions and a heading angle of vessel with wind, wave, current disturbances were carried out. From simulation results, the FGS - PID controller was confirmed to have better performances of keeping positions and a heading angle and consuming power than those of the PID controller. As a consequence, the proposed FGS - PID controller in this paper was validated to have more effectiveness to keep position and heading angle than that of PID controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.99-107
• /
• 2003

In a winding process, important control specifications include regulation of web tension and velocity. In this research, an adaptive controller has been developed for controlling web tension and velocity in winding processes. For the controller design, the linear quadratic regulator theory has been adopted and a gain-scheduling scheme has been incorporated. A prototype winding system has been constructed, and the controller has been implemented in a real-time PC-based environment. The performance of the closed loop system has been evaluated via simulation and experiments, and it was observed that both the web tension and velocity could be regulated within a small tolerance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.95-96
• /
• 1986

시스템을 입력과 출력값 만으로 제어하고자 할 경우에는, 플랜트의 파라메타를 추정하면서 제어해 나가야 할 것이다. 이러한 경우에는, 귀환제어나 최적제어 형태로는 여러가지 문제점이 발견되어서, 최근에 적응제어가 많이 연구되고 있다. 이에는 Gain-Scheduling 방법, Self-tuning regulator 방법 및 model reference adaptive control 방법이 있다. Gain-Scheduling 방법은 미지의 파라메타가 plant에 있을지라도, 이를 즉시 예측할 수 있을 경우 보조변수 추정을 통하여 이득을 조절하여 시스템을 안정시키는 것이고, self tuning regulator는 보조변수를 직접 조정하여 시스템을 제어한다. 또 model reference adaptive control 방법은 기준모델을 정하여, 이에 따라 관측기 등을 통하여, 플랜트의 파라메타를 추정 제어해 나가는 것이다. 이때 기준 모델의 출력과 플랜트 출력사이의 오차를 어떻게 할 것인가? 추정되는 파라메타와 오차와의 대수관계 및 차수 등, 그 한계 해석이 최근의 MRAC 설계연구에 큰 과제가 되어 왔다. 이에 본 연구에서는 신호합성 및 해석에 뛰어난 기능이 있는 Walsh 함수를 이용하여, 간단한 Micro computer의 도움으로, 오차 함수를 합성하고, 미지의 파라메타를 추정하여, 시스템의 adaptive filter설계에의 가능성에 대하여 연구하고자 한다. 또 이를 실제 예를 들어 고찰하였다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.6
• /
• pp.241-251
• /
• 2002

The effect of sensor faults in direct torque control(DTC) based induction motor drives is analyzed and a new Instrument fault detection isolation scheme(IFDIS) is proposed. The proposed IFDIS, which operated in real-time, detects and isolates the incipient fault(s) of speed sensor and current sensors that provide the feedback information. The scheme consists of an adaptive gain scheduling observer as a residual generator and a special sequential test logic unit. The observer provides not only the estimate of stator flux, a key variable in DTC system, but also the estimates of stator current and rotor speed that are useful for fault detection. With the test logic, the IFDIS has the functionality of fault isolation that only multiple estimator based IFDIS schemes can have. Simulation results for various type of sensor faults show the detection and isolation performance of the IFDIS and the applicability of this scheme to fault tolerant control system design.