• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.472-480
• /
• 2011

In this paper, we investigate two new candidate transmission schemes, non-orthogonal frequency reuse (NOFR) and beam-hopping (BH). They operate in different domains (frequency and time/space, respectively), and we want to know which domain shows overall best performance. We propose a novel formulation of the signal-to-interference plus noise ratio (SINR) which allows us to prove the frequency/time duality of these schemes. Further, we propose two novel capacity optimization approaches assuming per-beam SINR constraints in order to use the satellite resources (e.g., power and bandwidth) more efficiently. Moreover, we develop a general methodology to include technological constraints due to realistic implementations, and obtain the main factors that prevent the two technologies dual of each other in practice, and formulate the technological gap between them. The Shannon capacity (upper bound) and current state-of-the-art coding and modulations are analyzed in order to quantify the gap and to evaluate the performance of the two candidate schemes. Simulation results show significant improvements in terms of power gain, spectral efficiency and traffic matching ratio when comparing with conventional systems, which are designed based on uniform bandwidth and power allocation. The results also show that BH system turns out to show a less complex design and performs better than NOFR system specially for non-real time services.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.179-183
• /
• 1996

Most of the conventional electrocardiogaphies fail to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography (HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as ventricual late potentials(LP). In this paper, we developed a HRECG using uncorrected XYZ lead. The overall gain of the amplifier is 4000 and the bandwidth is $0.5{\sim}300Hz$ without using 60Hz notch filter. Three 16-bit AH converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to PC via a DMA-controlled serial communication channel using RS-485 and HDLC protocol. The noise level of the developed HRECG is less than $5{\mu}V_{rms,\;RTI}$. In order to further reduce the noise level, signal averaging technique is implemented utilizing template matching method. The SNR of the developed HRECG is high enough for the detection of LP.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.3-8
• /
• 2008

In this paper, an planar antenna which has omnidirectional radiation pattern in H-plane and low profile is proposed. By adding inductance elements of an ENG shell structure, a capacitance element of an electrically small antenna is easily achieved with impedance matching. An ENG shell structure is consist of a inductive loading structure which has symmetrical four stepped L-shape slots. The simulated result shows, the impedance bandwidth of the proposed antenna is 150MHz (2.5 ~ 2.65GHz). The simulated maximum radiation gain of proposed antenna is 1.12 dBi at center frequency 2.56GHz. Omnidirectional radiation pattern is achieved. The proposed antenna will be applied to wireless lan access point system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.635-641
• /
• 2004

This paper presents a new low-cost RF Built-In Self-Test (BIST) circuit for measuring transducer voltage gain, noise figure and input impedance of 5.25GHa low noise amplifier (LNA). The BIST circuit is designed using 0.18${\mu}{\textrm}{m}$ SiGe technology. The test technique utilizes input impedance matching and output transient voltage measurements. The technique is simple and inexpensive. Total chip size has additional area of about 18% for BIST circuit.

• Journal of KIISE
• /
• v.42 no.1
• /
• pp.93-96
• /
• 2015

The SIFT method is well-known for robustness against various image transformations, and is widely used for image retrieval and matching. The SIFT method extracts keypoints using scale space analysis, which is different from conventional keypoint detection methods that depend only on the image space. The SIFT method has also been extended to use higher-order scale space derivatives for increasing the number of keypoints detected. Such detection of additional keypoints detected was shown to provide performance gain in image retrieval experiments. Herein, a sigma based normalization method for keypoint detection is introduced using higher-order scale space derivatives.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.176-183
• /
• 2004

In this paper, two-stage low noise amplifier(LNA) for S-band is designed and implemented using ATF54143 HEMT of HP CO. In order to get noise figure and input VSWR to be wanted, it is considered input VSWR and noise figure simultaneously in matching-circuit designing. The fabricated two-stage low noise amplifier has the gain of 27.8dB, input VSWR and output VSWR under 1.5.

• ETRI Journal
• /
• v.41 no.4
• /
• pp.536-548
• /
• 2019

In this study, an electronically steerable parasitic array radiator (ESPAR) antenna via analog radio frequency (RF) switches for a single RF chain MIMO system is presented. The proposed antenna elements are spaced at ${\lambda}/64$, and the antenna size is miniaturized via a dielectric radome. The optimum reactance load value is calculated via the beamforming load search algorithm. A switch simplifies the design and implementation of the reactance loads and does not require additional complex antenna matching circuits. The measured impedance bandwidth of the proposed ESPAR antenna is 1,500 MHz (1.75 GHz-3.25 GHz). The proposed antenna exhibits a beam pattern that is reconfigurable at 2.48 GHz due to changes in the reactance value, and the measured peak antenna gain is 4.8 dBi. The reception performance is measured by using a $4{\times}4$ BPSK signal. The measured average SNR is 17 dB when using the proposed ESPAR antenna as a transmitter, and the average SNR is 16.7 dB when using a four-conventional monopole antenna.

• Journal of information and communication convergence engineering
• /
• v.16 no.4
• /
• pp.252-257
• /
• 2018

A wideband double radiator circular disc annular monopole antenna is proposed is this work. The radiators are etched on the surfaces of two Taconic TLY-5 substrates with a circular hole cut out of each of the radiators initially at the centers of the radiators with subsequent downward displacement of the holes. The antenna is designed with a two-step feeding transformer system for impedance matching between the input power source supplied by a $50-{\Omega}$ SMA connector and the monopole radiators. The transformer system improves the bandwidth performance at higher frequencies. The proposed antenna achieves a wideband having the capability of working between 0.645 and 18.775 GHz, corresponding to a -10 dB bandwidth of 186.7% with gain ranging from 0.95 to 8.26 dBi. In comparison to other metal disc planar monopole antennas, the proposed antenna has a small total size width due to the size of the ground plane, which has a diameter 100 mm. The frequency range of the antenna provides applications in global positioning systems, mobile communications, ultra-wideband short distance communications, and wireless computer networks.

• Korea Trade Review
• /
• v.44 no.4
• /
• pp.115-128
• /
• 2019

This article analyzes issues regarding the economic development of the arctic area with the aim of finding ways to help solve the problems and to support sustainable economic development of the arctic area. Some proposals are introduced for establishing a sound legal infrastructure of the Korea-Russia economic development of the arctic area. As Russia develops the Arctic area and the route through the Arctic area, Korea will gain the possibility of transportation efficiency, vitalization of international transaction, and finding new markets. Resource development in the North Pole is ongoing, with matching international transaction and economic benefits. To reflect the Korea-Russia interests and to sustain the effect, the legal infrastructure is inevitable. For example, it would be reinforced by pushing forward the Korea-Russia FTA. The legal infrastructure for economic cooperation of Korea and Russia has to reflect that 'the development of the Arctic area and making the route through the Arctic area' should increase the sustainability and vitality of international transaction. The legal infrastructure for economic benefits can also help mitigating non-economic arguments of international community such as the security risk in the Korean-peninsula and around the world.

• Journal of Korea Game Society
• /
• v.21 no.1
• /
• pp.139-148
• /
• 2021

In a game, the visual environment element is a means of expressing the intention of the developer, and is mediums that enable the player to gain to play experience of interaction. In this paper, the player's reaction to the visual environmental elements of the adventure game was patterned with a collection and analysis process by empirical experiments. The data collected through the experiment were about 10,000, and as a result of the analysis, 24 types of player reaction patterns were found in total. This can be used as a guideline for game space design by matching the properties of visual environment elements and the reactions against players occurring in the game play process to examine the play experience.