• 디지털콘텐츠학회 논문지
• /
• 제8권4호
• /
• pp.623-629
• /
• 2007

고고학과 미술역사의 범주에서 공예품, 회화, 건축의 조각이나 부조에서 보이는 인물, 신화, 종교적이거나 역사적사건, 문양과 장식등에 묘사된 모든 것들을 이미지화 하여 분석하고 시대의 풍습과 문화 양식까지 규정 한다. 이러한 이미지자료들이 노화 나 훼손, 또는 노출이 부족하게 촬영된 경우 색조의 분포가 고르지 않아 분석이 어려운 경우가 많다. 전문적인 사진의 색조 보정에 사용되는 Levels과 Curves는 그래프와 수치 값의 미세한 조절로서 결과 값을 산출하는 탁월한 기능이 있다. 색조가 훼손된 고고학적 이미지자료에 이 기술을 적용하여 그 방법을 모색하고 이 분야의 기초적인 응용기술로서의 유용성을 살펴보았다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.173-180
• /
• 2001

In the past few years, the nondestructive inspection technology has greatly developed due to the increased necessity to gain a complete understanding of the bridge behavior. Especially, the deformations of bridges contain a lot of informations about its health state. By measuring these deformations it is possible to analyze the loading and aging behavior of the structure. However, the current, methods (such as LVDT, dial gage, optical displacement transducer, etc) are often of changeable application on site and have the limitations of installation. In this paper, the classical beam theory was reviewed and the deflections of structure are estimated using measured strain which is easy to acquire. The applicability of this algorithm is verified by laboratory(simple reinforced concrete beam) and field test. By this test, we proposed correction factor to estimate deflection of reinforced concrete beam after cracking, and analyze about the generation of correction factor. Also fiber optic sensors as well as resistive strain gages were installed in the concrete beams to establish the applicability of fiber optic sensors in the field of civil engineering.

• 제어로봇시스템학회논문지
• /
• 제21권12호
• /
• pp.1152-1159
• /
• 2015

Switching power supply systems are widely used in many industrial fields. Power factor correction (PFC) circuits have a tendency to be applied in new power supply designs. The PFC circuit with a boost converter using an input power source is studied in this paper. In a boost PFC circuit, there are two feedback control loops: a current feedback loop and a voltage feedback loop. In this paper, the regulation performance gained by using the output voltage and compensator to improve the transient response presented at the continuous conduction mode (CCM) of the boost PFC circuit is analyzed. The validity of the designed boost PFC circuit is confirmed by both MATLAB simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.363-364
• /
• 2016

In this paper, a novel bridgeless interleaved power factor correction circuit with single current sensor is proposed. The proposed control strategy requires only one current sensor for the interleaved bridgeless PFC. By sampling the output current, all the boost indictor currents can be calculated and used to control the input current according to the input voltage. The reduced number of current sensors and associated feedback circuits helps reduce the cost of system. The problem caused by the unequal current gain between current sensors inherently does not exist in the proposed topology. Thus, current sharing between converters can be achieved more accurately and the high frequency distortion is decreased. In addition, the proposed technique can be applied to the other kinds of interleaved PFC topologies. Performance of the proposed control strategy is verified by the experimental results with 6.6kW bridgeless interleaved PFC circuit.

• 대한임베디드공학회논문지
• /
• 제1권2호
• /
• pp.37-42
• /
• 2006

In this paper, we study a problem of providing reliable data transmission in wireless sensor network(WSN). A system with forward error correction9FEC) can provide an objective reliability while using less transmission power than a system without FEC. We propose the use of LDPC codes of various code rate (0.53, 0.81, 0.91) of FEC for WSN. Node-node-node interference is considered in the simulation in addition to AWGN in the channel. It is shown that the rate of 0.91 LDPC coded system obtained 7dB gain in signal to noise ratio over a system without FEC.

• 제어로봇시스템학회논문지
• /
• 제13권8호
• /
• pp.798-803
• /
• 2007

In case of minimized digital camera and mobile digital camera, it's difficult to get the high quality image by conventional AE(Auto Exposure) algorithm because of restriction of system organization. In this paper, a new algorithm that adopts a target setting, a compensation of feedback delay and a gamma correction, etc, are suggested for improving a noise increase and an output sensitivity decrease due to system minimization. We also suggest a method using fuzzy logic which can decide more effectively the ES(Electric Shutter) value and the AGC(Analog Gain Control) value than conventional system.

• 대한치과교정학회지
• /
• 제2권1호
• /
• pp.41-46
• /
• 1971

The role of the Orthodontist in cleft lip and cleft palate therapy is primarily ill correction of malocclusion which is required by practically every child who has these defects. He can contribute to the assessment of dento-facial growth and development. We may gain the possible limited correction of delayed malocclusion due to cleft lip and palate. The authors have attempted delayed orthodontic treatment of a cleft lip and palate of 12.9 years old girl, who had a cleft lip and palate of surgical closure at 2,3 and 4 years old.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.28-31
• /
• 1996

We propose an estimator design method of Stewart platform, which gives the 6DOF, positions and velcities of Stewart platform from the measured cylinder length. The solution of forward kinematics is not solved yet as a useful realtime application tool because of the complexity of the equation with multiple solutions. Hence we suggest an nonlinear estimator for the forward kinematics solution using Luenberger observer with nonlinear error correction term. But the way of residual gain selection of the estimator is not clear, so we suggest an algebraic Riccati equation for gain matrix using Lyapunov method. This algorithm gives the sufficient condition of the stability of error dynamics and can be extended to general nonlinear system.

• 천문학회보
• /
• 제41권1호
• /
• pp.73.2-73.2
• /
• 2016

We present the results of KaVA SgrA* observation together with Takahagi(32m), Yamaguchi(32m) and Nobeyama(45m) telescopes at 22 and 43GHz, respectively. In early 2014, G2 cloud was expected to encounter with SgrA* and to make a significant flux variation, but it has not been measured yet. So it's worth to check our amplitude calibration method to confirm if we have a missing flux caused by uncertainty in measuring it. We have tested both a standard method using system noise temperature(Tsys) with antenna gain information, and a template method in order to calibrate antenna gain using nearby maser source. As a result, we found that the latter method is useful for antennas which have inaccurate gain information or poor Tsys measurements, and is especially effective for sources at low elevation like SgrA*. In addition, the comparison shows that the amplitude calibration by standard method can be improved up to 10% with a correction factor using a template method. This result implies we can get more accurate flux from a standard method when any maser source not exists around target.

• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.479-488
• /
• 2022

To account for the internal thermal effects of solid-state lasers, a method using a back propagation (BP) neural network integrated with a particle swarm optimization (PSO) algorithm is developed, which is a new wavefront distortion correction technique. In particular, by using a slab laser model, a series of fiber pumped sources are employed to form a controlled array to pump the gain medium, allowing the internal temperature field of the gain medium to be designed by altering the power of each pump source. Furthermore, the BP artificial neural network is employed to construct a nonlinear mapping relationship between the power matrix of the pump array and the thermally induced wavefront aberration. Lastly, the suppression of thermally induced wavefront distortion can be achieved by changing the power matrix of the pump array and obtaining the optimal pump light intensity distribution combined using the PSO algorithm. The minimal beam quality β can be obtained by optimally distributing the pumping light. Compared with the method of designing uniform pumping light into the gain medium, the theoretically computed single pass beam quality β value is optimized from 5.34 to 1.28. In this numerical analysis, experiments are conducted to validate the relationship between the thermally generated wavefront and certain pumping light distributions.