• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1167-1170
• /
• 1999

We consider a negative unity feedback control system in which a controller and a given minimum phase transfer function are in cascade. This paper present a sufficient condition for the existence of a constant gain controller under which the overall closed loop characteristic polynomial is stable. This sufficient condition is based on Lehnigk's lemmas.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.388-392
• /
• 2004

Due to the lack of stiffness and difficulties of control, it is hard to achieve well balanced magnetic levitation. In this paper, we analysis the current and position stiffness change according to bias current through experiment. Then, compensation equations were presented. After obtaining PD gain for each bias current and PD gain region through levitation experiment, we consider the characteristics.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.517-520
• /
• 2000

This paper deals with the statistical analysis of an autocalibration procedure for the gain and phase imbalances between the in-phase (I) and quadrature (Q) components in quadrature receivers. In real implementation, the imbalances of the gain and phase exist and degrade the performance of the receiver. In this paper we investigate the statistical characteristic of the estimates in an on-line imbalance estimation method for the receiver under the assumption of an additive white Gaussian noise environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.374-383
• /
• 2013

This paper presents a design for improvement of isolation characteristics by the inserted stub structure on ground plane of a handy terminal which is composed of a main antenna and a sub antenna covered LTE bandwidth. In order to compensate for a resonance length of proposed antenna and to realize a high isolation characteristic, a pair of stub was inserted and located on ground plane that currents from two antennas were converged. A simulated isolation characteristic of antenna without stub at the LTE class 13 band was about -5 dB, but its characteristics of proposed antenna with two stubs at uplink(777~787 MHz) and downlink(746~756 MHz) of the LTE class 13 band were about -12 dB and -15 dB, respectively. An average gain of a fabricated antenna with two stubs was observed about -2 dBi above and it showed good results with comparison of business condition that the average gain of commercial handy terminal has to appear -4 dBi above. The measured S-parameter characteristics and radiation patterns showed a reasonable agreement with the simulation results.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.163-166
• /
• 1999

In this paper, frequency synthesizer that can be used in IMT-2000 was designed and fabricated using dual loop PLL(Phase Locked Loop). For improving phase noise characteristic Voltage Controlled Oscillator was fabricated using coaxial resonator and eliminated frequency divider using SPD as phase detector and increased open loop gain. Fabricated frequency synthesizer had 1.82㎓ center frequency, 160MHz tuning range and -119.73㏈c/Hz low phase noise characteristic.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.60-65
• /
• 2002

The purpose of this study is to measure and compare the output power characteristics and optical gain for selenium vapour laser depending on the He gas purity. The purity of the He gas was improved with a special He-filter. During the measurement the individual wavelengths were selected with a birefringent filter. The result shows that compared with those of laser without He-filter, the output-coupling power and small signal gain of laser with He-filter increase in the most of the lines. Especially, the output-coupling power and small signal gain for the strong lines (497.6 nm, 499.3 nm, 506.9 nm, 517.6 nm, 522.8 nm, 530.5 nm), blue(460.4 nm, 464.8 nm) and red(644.4 nm 649.1 nm) lines lies notably higher.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.141-146
• /
• 2021

We have evaluated the suppression effect of atmospheric-turbulence-induced optical scintillation in terrestrial free-space optical (FSO) communication systems using a gain-saturated erbium-doped fiber amplifier (EDFA). The variation of EDFA output signal power has been measured with different amounts of gain saturation and modulation indices of the optical input signal. From the measured results, we have found that the peak-to-peak power variation was decreased drastically below 2 kHz of modulation frequency, in both 3-dB and 6-dB gain compression cases. Then, the power spectral density (PSD) of optical scintillation has been calculated with Butterworth-type transfer function. In the calculation, different levels of atmospheric-turbulence-induced optical scintillation have been taken into account with different values of the Butterworth cut-off frequency. Finally, the suppression effect of optical scintillation has been estimated with the measured frequency response of the EDFA and the calculated PSD of the optical scintillation. From our estimated results, the atmospheric-turbulence-induced optical scintillation could be suppressed efficiently, as long as the EDFA were operated in a deeply gain-saturated region.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.83-85
• /
• 2019

The use of high voltage gain converters is essential for the distributed power generation systems with renewable energy sources such as the fuel cells and solar cells due to their low voltage characteristics. In this paper, a high voltage gain topology combining cascode Inverting Buck-Boost converter and voltage multiplier structure is introduced. In proposed converter, the input voltage is connected in series at the output, the portion of input power is directly delivered to the load which results in continuous input current. In addition, the voltage multiplier stage stacked in proper manner is not only enhance high step-up voltage gain ratio but also significantly reduce the voltage stress across all semiconductor devices and capacitors. As a result, the high current-low voltage switches can be employed for higher efficiency and lower cost. In order to show the feasibility of the proposed topology, the operation principle is presented and the steady-state characteristic is analyzed in detail. A 380W-40/380V prototype converter was built to validate the effectiveness of proposed converter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.1033-1038
• /
• 2015

Complementary Filter is commonly used in signal processing method for real-time position measurement. Butterworth filter characteristic has a uniform gain in the pass band, the blocking band has a good blocking characteristics. Therefore, we propose a method of designing a complementary filter having a characteristic of Butterworth filter characteristic. By setting the appropriate filter coefficients in the simulation it appears to improve the performance of the filter. In the experiment it shows a real-time signal processing is possible by using the calculated filter coefficients in the simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1094-1097
• /
• 2003

In this paper, the cavity-length-dependent spectral and temporal characteristics of a V-groove AlGaAs-GaAs quantum wire (QWR) laser at each subband were investigated. At short cavity lasers less than $300{\mu}m$, a discrete wavelength switching from the n=1 to the n=2 subband occurred due to the increased threshold gain, resulting from the increased cavity loss. Using the characteristic of the wavelength shift from n=1 to the n=2 subband with shortening the cavity length, ultrafast lasing behaviors under gain switching at the n=1 and the n=2 subband transition were demonstrated and compared.