• 한국항해항만학회지
• /
• 제34권1호
• /
• pp.21-26
• /
• 2010

본 논문은 패치 안테나의 급전선 주위에 원통형 자성체을 이용하여 안테나의 고이득 및 광대역 안테나 설계법에 대해서 기술한다. 안테나의 고이득 설계를 위해서 급전선 주위에 생기는 자기장과 원통형 자성체 주위에 생기는 자기장을 결합시켜 급전선에 강한 전류를 유도시키는 방법을 사용하였고, 안테나의 광대역 설계를 위해서 shorting 스티브를 추가한 PIFA의 원리를 적용하여 설계하였다. 단일 원통형 자성체의 경우, 참고 안테나와 비교하여 3.96 dB 이득이 증가하였으나 대역폭 특성은 개선되지 않았다. 이중 원통형 자성체의 경우, 참고 안테나와 비교하여 이득은 약 10 dB 개선되었으며, -10 dB 이하 대역폭은 700 MHz(50 MHz~750 MHz)로써 광대역 특성을 가지는 안테나를 설계하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.579-587
• /
• 2014

This paper presents a variable gain amplifier (VGA) for an analog front-end (AFE) of ultrasound medical imaging. This VGA has a closed-loop topology and shows a 37-dB-linear characteristic with a single-stage amplifier. It consists of an op-amp, a non-binary-weighted capacitor array, and a gain-control block. This non-binary-weighted capacitor array reduces the required number of capacitors and the complexity of the gain-control block. The VGA has been fabricated in a 0.35-mm CMOS process. This work gives the largest gain range of 37 dB per stage, the largest P1 dB of 9.5 dBm at the 3.3-V among the recent VGA circuits available in the literature. The voltage gain is controlled in the range of [-10, 27] dB in a linear-in-dB scale with 16 steps by a 4-bit digital code. The VGA has a bandpass characteristic with a passband of [20 kHz, 8 MHz].

• 항공우주기술
• /
• 제8권2호
• /
• pp.1-7
• /
• 2009

세계최초의 정지궤도 해양탑재체인 GOCI(Geostationary Ocean Color Imager)는 정지궤도 복합위성인 COMS(Communication, Ocean, and Meteorological Satellite)에 기상탑재체, 통신탑재체와 함께 탑재되기 위해 개발되고 있다. 본 논문에서는 부분품 레벨의 응답특성을 이용한 탑재체 레벨의 복사모델 수립방법을 소개하며, 복사모델을 이용하여 각 채널의 비선형성 특성을 분석한다. 또한, 해양탑재체의 복사시험 데이터를 이용하여 각 채널의 비선형 특성을 검증한다. 분석 결과, 선형이득과 비선형이득의 함수로 표현되는 비선형성$G^3$/b는 모든 채널에 대해 동일함을 확인하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권12호
• /
• pp.663-670
• /
• 2003

This paper deals with speed control of DC servo motor using a Adaptive high gain obserber. In this parer, the gain of the observer is properly set up using the fuzzy control and adaptive high gain observer that have a superior transient characteristic and is easy to implement compared the existing method is designed. In order to verify the performance of the Adaptive high gain observer which is proposed in this paper, it is compared estimate performance of High-gain Observer and Adaptive High Gain Observer with the computer simulation. Effectiveness of the proposed high gain observer is proved from the experiment to compare the case with a speed sensor to the case with Adaptive high gain observer in the speed control of DC servo motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.53-55
• /
• 2004

This paper deals with speed control of AC servo motor using a Adaptive fuzzy high gain observer. In this parer, the gain of the observer is properly set up using the fuzzy control and adaptive high gain observer that have a superior transient characteristic and is easy to implement compared the existing method is designed. In order to verify the performance of the Adaptive fuzzy high gain observer which is proposed in this paper, it is compared estimate performance of High-gain Observer and Adaptive High Gain Observer with the computer simulation. Effectiveness of the proposed high gain observer is proved from the experiment to compare the case with a speed sensor to the case with Adaptive fuzzy high gain observer in the speed control of AC servo motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.484-487
• /
• 2003

In this paper describes a design of Adaptive high gain observer. The gain of the observer is properly set up using the fuzzy control and adaptive high gain observer that have a superior transient characteristic and is easy to implement compared the existing method is designed. In order to verify the performance of the Adaptive high gain observer which is proposed in this paper, it is compared estimate performance of High-gain Observer and Adaptive High Gain Observer with the computer simulation. Effectiveness of the proposed high gain observer is proved from the simulation to compare the case with a speed sensor to the case with Adaptive high gain observer in the speed control of DC servo motor.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.111-117
• /
• 2003

We propose a diode-based RF pre-distorter with various gain and phase characteristics, for non-linearity compensation of RF power amplifiers. This pre-distorter results in the removal of the diode- and configuration-dependent characteristics in the conventional diode-based RF pre-distorters. We have analyzed the operation principle of the proposed pre-distorter. The results show that gain and phase characteristics of the pre-distorter in all four quadrants are achieved. Several power amplifiers and test signals are used for verifying the performance of the proposed diode-based RF pre-distorter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1046-1049
• /
• 2002

In this paper, a sub-harmonic dual-gate FET mixer for IMT-2000 base-station was designed by using single-gate FET cascode structure and driven by the second order harmonic component of LO signal. The dual-gate FET mixer has the characteristic of high conversion gain and good isolation between ports. Sub-harmonic mixing is frequently used to extend RF bandwidth for fixed LO frequency or to make LO frequency lower. Furthermore, the LO-to-RF isolation characteristic of a sub-harmonic mixer is better than that of a fundamental mixer because the frequency separation between the RE and LO frequency is large. As RF power is -30dBm and LO power is 0dBm, the designed mixer shows the -47.17dBm LO-to-RF leakage power level, 10dB conversion gain, -0.5dBm OIP3, -10.5dBm IIP3 and -1dBm 1dB gain compression point.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2225-2235
• /
• 2004

An observatory termed 'Steel Swing' has been developed, where a 15000 kg pendulum is hanged from a stiff steel frame. A building element can be tested after inserted between the pendulum and the frame. Free vibration, forced vibration tests and earthquake monitoring were performed on an exposed-type steel column base. The response records monitored during natural earthquakes were used to identify the vibration property of the specimen. Identified system gain was approximated by a theoretical gain of linear SDOF system, and the response calculated based on such a linear system agrees with the monitored response fairly well. This research technique can be applied to check the behaviors of new materials and new details of connections and the safety of non-structural elements as well.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.221-224
• /
• 2012

We propose a Readout Integrated Circuit (ROIC), which applies a fixed current bias sensing method to the input stage in order to simplify the circuit structure and the infrared sensor characteristic control. For the sample-and-hold stage to display and control a signal detected by the infrared sensor using a two-dimensional (2D) focal plane array, a differential delta sampling (DDS) circuit is proposed, which effectively removes the FPN. In addition, the output characteristic is improved to have wider bandwidth and higher gain by applying a two-stage variable gain amplifier (VGA). The output characteristic of the proposed device was 23.91 mV/$^{\circ}C$, and the linearity error rate was less than 0.22%. After checking the performance of the ROIC using HSPICE simulation, the chip was manufactured and measured using the SMIC 0.35 um standard CMOS process to confirm that the simulation results from the actual design are in good agreement with the measurement results.