• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.8-14
• /
• 2000

광여기 MQW(Multiple Quantum Well)면형 광증폭기에 대한 이득해석과 더불어 제작 및 측정을 수행하였다. 제안된 광증폭기는 편광무의존성, 광섬유와의 높은 결합효율, 그리고 동작파장의 자유도가 높다는 등의 장점을 자니고 있다. 본 논문에서는 100내지 200주기 MQW의 이득특성을 격자왜곡과 선택도핑의 효과를 고려해 해석하였다. 그 결과, 3㏈정도의 단일경로이득과 넓은 동작파장특성을 나타내었으며 이 해석 결과는 우리들이 행한 실험결과와 거의 일치하였다. 면형 광증폭기의 단일경로이득이 낮으면 FPI(Fabry-Perot Interferometer)구조로 증폭률을 높이는데는 협대역성의 문제가 발생하나,2-3㏈이상의 적정한 단일경로이득을 가질 경우, FPI 구조로 고이득과 적정한 동작파장특성을 가지게 할 수 있다. 예를 들면 단일경로이득이 3㏈인 MQW를 FPI 구조로 할 경우, 최대이득 10.1㏈, 동작파장대역이 4.6nm의 특성을 가지도록 할 수 있음을 보였다.

• 한국광학회지
• /
• 제18권2호
• /
• pp.93-99
• /
• 2007

본 논문에서는 주기적으로 분산 값의 부호가 바뀌는(dispersion managed: DM) 선로에서 급작스런 분산 변화로 인한 scattering을 완화시키도록 이득을 공간적으로 변조(gain management: GM)하는 시스템을 제안하고 이에 대한 modulation instability(MI) 변화에 대한 이론적인 분석과 수치해석적인 분석을 보고한다. 연구결과 어떤 경우에도 GM을 가한 시스템이 DM만을 한 시스템 보다 MI 이득의 크기와 cutoff frequency, side band peak모두가 작아짐을 확인하였다. 동일한 광신호 세기에 대해서 MI 이득이 작아지는 것은 four wave mixing 등 광섬유의 비선형 현상을 완화시킴으로써 파장분할다중화 전송의 품질 향상에 도움이 될 뿐 아니라, 솔리톤(soliton)을 이용한 전송에 있어서 하나의 펄스에 더 많은 에너지를 갖게 함으로써 신호대 잡음비를 개선할 수 있음을 의미한다. 본 논문에서는 분산과 이득이 동시에 조절된 선로의 효과를 솔리톤 전송 시스템의 개선된 특성을 편광모드분산(polarization mode dispersion: PMD)가 존재하는 선로에서의 펄스 폭 증가를 통하여 살펴본다.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1888-1892
• /
• 2008

In this paper, a new parallel CMOS self-bias differential amplifier is designed to use in high-speed analog signal processing circuits. The designed parallel CMOS self-bias differential amplifier is developed by using internal biasing circuits and the complement gain stages which are parallel connected. And also, the parallel architecture of the designed parallel CMOS self-bias differential amplifier can improve the gain and gain-bandwidth product of the typical CMOS self-bias differential amplifier. With 1.8V $0.8{\mu}m$ CMOS process parameter, the results of HSPICE show that the designed parallel CMOS self-bias differential amplifier has a dc gain and a gain-bandwidth product of 64 dB and 49 MHz respectively.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1234-1239
• /
• 2013

This paper provides a technical review of speed control using variable gain PI algorithm for BLDC(Brushless DC) motor. Usually the PI control is used in many motor applications, but a general PI control has problems of overshooting and disturbance for response. By the change of PI gain in motor control operation, these problems can be solved. To find the optimized PI gains for BLDC motor control, many control methods have been proposed. In this paper, the control algorithm with a variable PI gain is applied to improve overshooting response in transient region and rapid load disturbance rejection. Fixed gain and variable gain PI controls are compared. The validity of the propose method is verified by experiment.

• ETRI Journal
• /
• 제25권5호
• /
• pp.407-411
• /
• 2003

A dielectric superstrate layer above a microstrip patch antenna has remarkable effects on its gain and resonant characteristics. This paper experimentally investigates the effect of a superstrate layer for high gain on microstrip patch antennas. We measured the gain of antennas with and without a superstrate and found that the gain of a single patch with a superstrate was enhanced by about 4 dBi over the one without a superstrate at 12 GHz. The impedance bandwidths of a single patch with and without a superstrate for VSWR < 2 were above 11%. The designed $2{\times}8$ array antenna using a superstrate had a high gain of over 22.5 dB and a wide impedance bandwidth of over 17%.

• 한국광학회지
• /
• 제9권3호
• /
• pp.181-185
• /
• 1998

에르븀 첨가 광섬유 증폭기(EDFA)를 제작하여 장거리 전송 시의 이득, 신호대 잡음비와 대역을 측정하였다. 이득 \ulcorner탄화 되지 않은 EDFA를 recirculating loop에 넣어 장거리 전송 실험을 한 결과 EDFA 20회 통과시에는 3dB 이득 변화를 보이는 대역이 6nm이다. 반면에 이득 평탄화 된 EDFA는 1dB 이득 대역이 22nm 이며, EDFA 100회 통과시에 9nm대역이 5dB 이내에 들게 되어 여러 파장을 동시에 초장거리 전송 할 수 있음을 확인하였다.

• ETRI Journal
• /
• 제20권1호
• /
• pp.28-36
• /
• 1998

A simple experimental method to design gain-flattened erbium-doped fiber amplifier is proposed and demonstrated based on the two linear relations between the output power and the pump power, and between the gain and the length of the eribium-doped fiber at the gain flattened state. The spectral gain variation of the eribium-doped fiber amplifiber constructed by this method was less than 0.4 dB over 12 nm (1,545~1,557nm) wavelength region. The gain flatness is also controlled within 0.4 dB over the input power range of -30~-15dBm/ch through the feedback control utilizing the amplified spontaneous emission power in the 1,530 nm region.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.724-730
• /
• 1995

Fixed-gain and variable-gain PID control of tension in the winding section of a simple web transport system were evaluated. An open-loop mathematical model for the web transport system was derived and used for the design of the PID controllers. The winding roll radius is a timevarying parameter in the model. The fixed-gain PID controller designed at a particular instant of time could not meet the desired specifications, whereas the variable-gain PID controller could produce accurate tension control in the winding section. An advantage of the variable-gain control is its simplicity. This approach is easy to implement and shows promise for applications where the time-varying parameters are easily measured.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2257-2261
• /
• 2007

A new CMOS transresistance amplifier for low-voltage analog integrated circuit design applications is presented. The proposed transresistance amplifier circuit based on common-source and negative feedback topology is compared with other recent reported transresistance amplifier. The proposed transresistance amplifier achieves high transresistance gain, gain-bandwidth with the same input/output impedance and the minimum supply voltage $2V_{DSAT}+V_T$. Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS technology was performed and achieved $59dB{\Omega}$ transresistance gain which is above the maximum about $18dB{\Omega}$ compared to transresistance gain of the reported circuit.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권10호
• /
• pp.583-590
• /
• 2003

This paper deals with speed control of DC servo motor using a high gain obserber. It was designed to estimate rotor speed of DC servo motor and it carries out speed control from the feedback of the estimated speed signal. Also, PI controller was used in speed controller. In order to verify the performance of the high gain observer which is proposed in this paper, it is compared estimate performance of Luenberger Observer and High Gain Observer with the computer simulation. Effectiveness of the proposed high gain observer is proved from the experiment to compare the case with a speed sensor to the case with high gain observer in the speed control of DC servo motor.