• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.321-324
• /
• 2020

In this work, we developed a selective etching process for GaN that is a key process in p-GaN/AlGaN/GaN enhancement-mode (E-mode) power switching field-effect transistor (FET) fabrication. In order to achieve a high current density of p-GaN/AlGaN/GaN E-mode FET, the p-GaN layer beside the gate region must be selectively etched whereas the underneath AlGaN layer should be maintained. A selective etching process was implemented by oxidizing the surface of the AlGaN layer and the GaN layer by adding O2 gas to Cl2/N2 gas which is generally used for GaN etching. A selective etching process was optimized using Cl2/N2/O2 gas mixture and a high selectivity of 53:1 (= GaN/AlGaN) was achieved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.398-400
• /
• 1998

In this paper, the etching studies for n-GaN were carried out using the wet chemical, the photo-enhanced-chemical, and the electro-chemical etching methods. The experimental results show that n-GaN is etched in diluted NaOH solution at room temperture and the etched thickness of NaOH and electron concentrations. Te etching rate of n-GaN samples with n.simeq.1*10$^{19}$ cm$^{-3}$ were used to compare the photo-enhanced-chemical etching with the electrochemical etching methods. The removed thickness was 680.angs./25min by the electrochemical etching methods. The removed thickness was 680 .angs./25min by the electrochemical etching method ad 784.angs./25min by the photoenhanced-chemical etching method. The patterns are 100.mu.m*100.mu.m rectangulars covered with SiO$_{2}$film. It is shown that the profile of etched side-wall of the pattern is vertical without dependance of the n-GaN orientations.

• 한국결정성장학회지
• /
• 제24권5호
• /
• pp.196-201
• /
• 2014

화학적 습식 에칭을 통해 AlN와 GaN의 결함 및 표면 특성을 분석했다. 화학적 습식 에칭은 단결정의 결함을 선택적으로 에칭하기 때문에 결정의 품질을 평가하는 좋은 방법으로 주목 받고 있다. AlN와 GaN의 단결정은 NaOH/KOH 용융액을 이용하여 에칭을 했으며, 에칭 후 표면 특성을 알아보기 위해 주사전자현미경(SEM)과 원자힘 현미경(AFM)을 촬영했다. 에치 핏의 깊이를 측정하여 표면에 따른 에칭 속도를 계산했다. 그 결과 AlN와 GaN 표면에는 두 개의 다른 형태에 에치 핏이 형성 되었다. (0001)면의 metal-face(Al, Ga)는 육각 추를 뒤집어 놓은 형태를 갖는 반면 N-face는 육각형 형태의 소구 모양(hillock structure)을 하고 있었다. 에칭 속도는 N-face가 metal-face(Al, Ga)보다 각 각 약 109배(AlN)와 5배 정도 빨랐다. 에칭이 진행되는 동안 에치 핏은 일정한 크기로 증가하다 서로 이웃한 에치 핏들과 합쳐지는 것으로 보여졌다. 또한 AlN와 GaN의 에칭 공정을 화학적 메커니즘을 통해 알아 보았는데, 수산화 이온($OH^-$)과 질소의 dangling bond에 영향을 받아 metal-face(Al, Ga)와 N-face가 선택적으로 에칭되는 것으로 추론되었다.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.249-254
• /
• 1998

GaN계 재료의 습식 화학식각 특성과 광 화학 및 전기 화학 및 전기 화학 습식식각 특성을 연구하였다. n형 GaN는 상온에서 NaOH 수용액에 식각되었으며 식각두께는 식각시간에 선형적으로 증가하였다. 또 광 조사 및 전기 화학을 가할 경우 식각율은 수배로 증가하였으며, 식각율은 $1{\times}10^{19};cm^{-3}$의 전자농도를 갖는 시료에서 광 조사시 최대 164${\AA}$/min을 얻었다. n-GaN의 식각율은 GaN의 전자농도에 크게 의존하는 특성을 나타내었으며 이러한 식각과정을 논의하였다. $SiO_2$ 박막으로 덮여진 100${\mu}m{\times}100{\mu}m$ 모양의 옆 식각면은 방향성을 갖지 않고 수직하였으며, 넓은 면적에서 매우 평탄하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.391-392
• /
• 2012

In these days, the desire for the precise and tiny displays in mobile application has been increased strongly. Currently, laser displays ranging from large-size laser TV to mobile projectors, are commercially available or due to appear on the market [1]. In order to achieve a mobile projectors, the semiconductor laser diodes should be used as a laser source due to their size and weight. In this presentation, the continuous etch characteristics of Pd and AlGaN/GaN superlattice for the fabrication of blue laser diodes were investigated by using inductively coupled $CHF_3$ and $Cl_2$ -based plasma. The GaN laser diode samples were grown on the sapphire (0001) substrate using a metal organic chemical vapor deposition system. A Si-doped GaN layer was grown on the substrate, followed by growth of LD structures, including the active layers of InGaN/GaN quantum well and barriers layer, as shown in other literature [2], and the palladium was used as a p-type ohmic contact metal. The etch rate of AlGaN/GaN superlattice (2.5/2.5 nm for 100 periods) and n-GaN by using $Cl_2$ (90%)/Ar (10%) and $Cl_2$ (50%)/$CHF_3$ (50%) plasma chemistry, respectively. While when the $Cl_2$/Ar plasma were used, the etch rate of AlGaN/GaN superlattice shows a similar etch rate as that of n-GaN, the $Cl_2/CHF_3$ plasma shows decreased etch rate, compared with that of $Cl_2$/Ar plasma, especially for AlGaN/GaN superlattice. Furthermore, it was also found that the Pd which is deposited on top of the superlattice couldn't be etched with $Cl_2$/Ar plasma. It was indicating that the etching step should be separated into 2 steps for the Pd etching and the superlattice etching, respectively. The etched surface of stacked Pd/superlattice as a result of 2-step etching process including Pd etching ($Cl_2/CHF_3$) and SLs ($Cl_2$/Ar) etching, respectively. EDX results shows that the etched surface is a GaN waveguide free from the Al, indicating the SLs were fully removed by etching. Furthermore, the optical and electrical properties will be also investigated in this presentation. In summary, Pd/AlGaN/GaN SLs were successfully etched exploiting noble 2-step etching processes.

• 대한금속재료학회지
• /
• 제46권4호
• /
• pp.217-222
• /
• 2008

Characteristics of etching and induced surface morphology variation by wet-etching of n-face n-type GaN were investigated using KOH solutions. It was observed that hexagonal pyramids were formed on the etched surface regardless of etching conditions. However, the size of the hexagonal pyramids was changed as the etching time and temperature increased, respectively. Initially, as the etching time and concentration of KOH solution increased, the hexagonal pyramid was observed to be dissociated into smaller pyramids. However, as the etching time increased further, the size of the hexagonal pyramids increased again, indicating that the etching of N-face n-type GaN by KOH solutions proceeded through the evolution of hexagonal pyramids, such as formation, dissociation and enlargement of pyramids. Furthermore, it was also observed that there is a correlation between the photoluminescence intensity of the etched surface and the value of root-mean-square roughness. The intensity of PL increased as the roughness value increased due to the enhancement of the extraction efficiency of the generated photons.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.416-422
• /
• 1999

The characteristics of inductively coupled Cl$_2$/BCl$_3$ plasmas during the GaN etching were studied using plasma mass spectrometry by measuring the relative amounts of reactive ions, neutrals, and etch products. GaN etch rates increased with the increase of pressure and showed a maximum near 25mTorr for the pure $Cl_2$ and near 30mTorr for $Cl_2$$BCl_3$. The addition of$ BCl_3$ to $Cl_2$ also was increased GaN etch rates until 50%BCl$_3$ was mixed to $Cl_2$. The GaN etching with pure $Cl Cl_2$ appears to be related to the combination of Cl$_2^{+}$ ion bombardment and the chemical reaction of Cl radicals. In the case of the GaN etching with Cl$_2$/BCl$_3$, in addition to the combined effect of$_2^{ +}$ ions and Cl radicals, $_BCl2^{+ }$ ions appear to be responsible for some of GaN etching even though they do not have significant effect on the GaN etching compared to $Cl_2^{+}$ and Cl. $Ga^{+ }$ , $GaCl^{+}$ , $GaCl_2^{+}$ , and $N_2^{+}$ were observed as the positive ions of etch products, and the intensities of these etch products showed the same trends as those of GaN etch rate. Among the etch products, Ga and $N_2$ appear to be the main etch products.

• 한국진공학회지
• /
• 제17권4호
• /
• pp.353-358
• /
• 2008

AlGaInP 기반 수직형 적색 LED (Light Emitting Diode)의 광추출효율을 증가시키기 위하여 화학적 etching 기술을 이용하여 n-AlGaInP 표면에 삼각꼴 모양의 거칠기를 형성하였다. Etching은 $H_3PO_4$계의 용액을 이용하여 화학적 etching을 진행 하였다. AlGaInP etching은 광추출효율의 증가와 밀접한 관련을 갖고 있으며 AFM (Atomic Force Microscope)을 이용하여 AlGaInP 표면을 분석하여 약 44 nm의 RMS (root-mean-square) 거칠기가 형성됨을 알 수 있었다. 광추출효율은 기존 수직형 적색 LED보다 거칠기가 형성된 수직형 적색 LED에서 41%의 높은 발광 효율을 보임으로써 고효율 수직형 적색 LED의 가능성을 보였다.

• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.30-34
• /
• 2016

In this paper, we report that selective etching on N-polar face by EC (electro-chemical)-etching effect on the reduction of bowing and strain of FS (free-standing)-GaN substrates. We applied the EC-etching to concave and convex type of FS-GaN substrates. After the EC-etching for FS-GaN, nano porous structure was formed on N-polar face of concave and convex type of FS-GaN. Consequently, the bowing in the convex type of FS-GaN substrate was decreased but the bowing in the concave type of FS-GaN substrate was increased. Furthermore, the FWHM (full width at half maximum) of (1 0 2) reflection for the convex type of FS-GaN was significantly decreased from 601 to 259 arcsec. In the case, we confirmed that the EC-etching method was very effective to reduce the bowing in the convex type of FS-GaN and the compressive stress in N-polar face of convex type of FS-GaN was fully released by Raman measurement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.339-339
• /
• 2010

Photo-assisted wet chemical etching of GaN thin film was studied using KOH based solutions. A $2{\mu}m-2{\mu}m$ titanium line-and-space pattern was used as a etching mask. It is found that the etching characteristics of the GaN thin film is strongly dependent on the pattern direction by unisotropic property of KOH based solution. When the pattern was aligned to the [$11\bar{2}0$] directions, ($10\bar{1}n$)-facet is revealed constructing V-shaped sidewalls.