• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.1-8
• /
• 2007

The DC characteristics of GaAs Gunn diode are investigated as a preliminary study on the planar grade gap injector GaAs Gunn diode which is the transferred electron device with high output power and dc-rf conversion efficiency. The Gunn devices we fabricated were confirmed to have the DC characteristics of negative differential resistance(NDR). We discussed the nature of the NDR effect, including the electron intervalley transfer; the NDR effect was examined for six different cathode radii.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.21-29
• /
• 2008

The DC characteristics of GaAS Gunn diode are investigated as a preliminary study on the planar grade gap injector GaAs Gunn diode which is the transferred electron device with high output power and dc-rf conversion efficiency. The Gunn devices we fabricated were confirmed to have the DC characteristics of negative differential resistance(NDR). We discussed the nature of the NDR effect, including the electron intervalley transfer; the NDR effect was examined for six different cathode radii.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.1-6
• /
• 2009

We fabricated Gunn diodes with a double heat sink which has anode heat sink as well as cathode heat sink for efficient heat dissipation. We compared the DC characteristics of a double heat sink diode with a conventional cathode heat sink Gunn diode. It was shown that the Gunn diode with a single heat sink has the threshold voltage of 3 V, the peak current of 744 mA and the breakdown voltage of 4.8 V. Also, the Gunn diode with a double heat sink showed the threshold voltage of 2.5 V, the peak current of 778 mA and the breakdown voltage over 5 V.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.64-72
• /
• 2005

In this paper, we propose a design method of the millimeter-wave(W-Band) waveguide cavity harmonic voltage controlled oscillator(VCO) using a Gunn diode for the armor sensor. Using the 3-dimensional simulation tool(Ansoft $HFSS^{TM}$), we were able to find the impedance matching point between waveguide and Gunn diode and estimate the oscillation frequency. A varactor diode is used for the frequency tuning, and we find out the equation for the calculation of the tunable frequency range. The designed VCO shows good performances; 17dBm output power at 94GHz center frequency, 520MHz frequency tuning range similar to the estimated value(480MHz).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.214-218
• /
• 2012

In this paper, we reported on a high performance waveguide VCO(voltage controlled oscillator) for FMCW applications. The waveguide VCO consists of a GaAs Gunn diode, a varactor diode, and two bias posts with low pass filter(LPF). The cavity is designed for fundamental mode at 47 GHz and operated at second harmonic of 94 GHz center frequency. The developed waveguide VCO has 1.095 GHz bandwidth, 590 MHz linearity with 1.69% and output power from 14.86 to 15.93 dBm. The phase noise is under -95 dBc/Hz at 1 MHz offset.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1035-1039
• /
• 2012

In this paper, we developed a 94 GHz waveguide VCO(voltage controlled oscillator) using a GaAs-based Gunn diode and a varactor diode. The cavity is designed for fundamental mode at 47 GHz and operated at second harmonic of 94 GHz. Bias posts for diodes operate as LPF(low pass filter) and resonator. The fabricated waveguide VCO achieves an oscillation bandwidth of 760 MHz. Output power is from 12.61 to 15.26 dBm and phase noise is -101.13 dBc/Hz at 1 MHz offset frequency from the carrier.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.45-51
• /
• 2007

We designed and fabricated the planar graded-gap injector GaAs Gm diodes with $1.6{\mu}m$ active length for operation at 94 GHz. The fabrication of the Gunn diode is based on MESA etching, Ohmic metalization, and overlay metalization. The measured negative resistance characteristics of the graded-gap injector GaAs Gunn diodes are examined for two different device structures changing the distance between the cathode and the anode electrodes. Also, we discuss the DC results under the forward and the reverse biases concerning the role of the graded-gap injector. It is shown that the structure having the shorter distance between the cathode and the anode electrode has higher peak current, higher breakdown voltage, and lower threshold voltage than those of the larger distance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1652-1656
• /
• 2014

In this work, we demonstrated a 77 GHz waveguide VCO with transition from WR-12 to WR-10 for anti-collision radar applications. The fabricated waveguide VCO consists of a GaAs-based Gunn diode, a varactor diode, a waveguide transition, and two bias posts for operating as a LPF and a resonator. The cavity is designed for fundamental mode at 38.5 GHz and operated at second hormonic of 77 GHz. The waveguide transition has a 1.86 dB of insertion loss and -30.22 dB of S11 at the center frequency of 77 GHz. The fabricated VCO achieves an oscillation bandwidth of 870 MHz. Output power is from 12.0 to 13.75 dBm and phase noise is -100.78 dBc/Hz at 1 MHz offset frequency from the carrier.