• Tuberculosis and Respiratory Diseases
• /
• v.59 no.4
• /
• pp.432-435
• /
• 2005

An 82-year-old female non-smoker with a history of hypertension presented with increasing dyspnea, cough and some purulent sputum without fever. Upon admission, the patient was in a distressed condition. Auscultation revealed diminished breath sounds with no rales over the right lung. An examination of the heart revealed a regular rhythm and a systolic murmur radiating from the apex of the heart. There was no pitting edema in the lower extremities. The blood tests showed mild leukocytosis and an increased C-reactive protein level. The $O_2$ saturation was 98 % whilst breathing room air. The electrocardiogram demonstrated sinus tachycardia. The chest radiograph showed a moderate cardiomegaly, right lobe infiltrates, and blunting of the both costophrenic sulcus suggesting a small pleural effusion. Three days after admission, the symptoms became slightly aggravated despite being treated with empirical antibiotics for presumed community-acquired pneumonia. Transthoracic color Doppler echocardiography indicated an ejection fraction of 48 %, mild left ventricular enlargement, and moderate left atrial enlargement resulting in severe mitral regurgitation. The clinical symptoms and right pulmonary edema resolved quickly with intravenous furosemide treatment.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.234-240
• /
• 2017

In this study, the influences of rail surface roughness on dynamic wheel-rail forces currently employed in conventional lines were assessed by performing field measurements according to grinding of rail surface roughness. The influence of the grinding effect was evaluated using a previous empirical prediction model for dynamic wheel-rail forces; model includes first-order derivatives of QI (Quality Index) and vehicle velocity. The theoretical dynamic wheel-rail force determined using the previous prediction equation was analyzed using the QI, which decreased due to rail grinding as determined through field measurements. At a constant track support stiffness, an increase in the QI caused an increase in dynamic wheel-rail forces. Further, it can be inferred that the results of dynamic wheel-rail analysis obtained using the measured data, such as the variation of QI due to rail grinding, can be used to predict the peak dynamic forces. Therefore, it is obvious that the optimum amount of rail grinding can be determined by considering the QI, that was regarding an operation characteristics of the target track (vehicle velocity and wheel load).

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.257-264
• /
• 2017

The PC (Precast Concrete) construction method is a technique where concrete members that have been produced in a plant are constructed on site. Thus, continuity and secure integration of a structure that can be obtained by connecting rebars at splicing joint for PC members are the main areas of concern for this method. To evaluate the splicing and bonding performance according to application of a splice sleeve for connecting rebar in this research study, the diameter of rebar, development length, grouting strength etc. were set as variables. The performance and stiffness of splicing according to the development length of grout strength were measured and evaluated. In addition, by conducting comparative analysis on each of the variables, the factors that affected the splice sleeve for connecting rebar were discussed. The results confirmed that the strength and stiffness of the splice sleeve for connecting rebar were significantly affected by the development length while the increase in performance according to grout strength was not as significant.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.155-162
• /
• 2013

Genome-wide association study was performed on data from 266 Hanwoo steers derived from 66 sire using bovine 10K mapping chip in Hanwoo (Korean Cattle). SNPs were excluded from the analysis if they failed in over 5% of the genotypes, had median GC scores below 0.6, had GC scores under 0.6 in less than 90% of the samples, deviated in heterozygosity more than 3 standard deviations from the other SNPs and were out of Hardy-Weinberg equilibrium for a cutoff p-value of $1^{-15}$. Unmapped and SNPs on sex chromosomes were also excluded. A total of 4,522 SNPs were included in the analysis. To test an association between SNP and QTL, GWAS for five genetic mode (additive, dominant, overdominant, recessive and codominant) was implemented in this study. Three SNPs (rs29018694, ss46526851 and rs29018222) at a threshold p< $1.11{\times}10^{-5}$ were detected on BTA12 and BTA21 for dressing percentages in codominant and recessive genetic mode. The G allele for rs29018694 has 4.9% higher dressing percentage than A allele, while the T allele for ss46526851 has 2.57 % higher dressing percentage than C allele. Therefore, rs29018694 SNP showed a bigger effect than the other two SNPs (ss46526851 and rs29018222) in this study. In conclusion, this study identifies three loci with moderate effects and many loci with infinitesimally small effect across genome in Hanwoo.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.3
• /
• pp.147-154
• /
• 2014

In the context of an increasing need for safety in concrete structures under blast and impact loading condition, the behavior of concrete under high strain rate condition has been an important issue. Since concrete subjected to impact loading associated with high strain rate shows quite different material behavior from that in the static state, several material models are proposed and used to describe the high strain rate behavior under blast and impact loading. In the process of modelling high strain rate conditions with these material models, mesh dependency in the used finite element(FE) is the key problem because simulation results under high strain-rate condition are quite sensitive to applied FE mesh size. This paper introduces an criterion which can minimize the mesh-dependency of simulation results on the basis of the fracture energy concept, and HJC(Holmquist Johnson Cook) model is examined to trace sensitivity to the used FE mesh size. To coincide with the purpose of the perforation simulation with a concrete plate under a projectile(bullet), the residual velocities of projectile after perforation are compared. The analytical results show that the variation of residual velocity with the used FE mesh size is quite reduced and accuracy of simulation results are improved by applying a unique failure strain value determined according to the proposed criterion.

• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.106-115
• /
• 2020

In order to find out the relationship between spring phytophenological index and temperature index for the past nine years (2010~2018), this study identified the relationship between temperature changes and trends in spring phytophenological index of sprouting, flowering and leaf unfolding of Pinus densiflora Siebold & Zucc., Larix kaempferi (Lamb.) Carrière, Quercus mongolica Fisch. ex Ledeb., Rhododendron mucronulatum Turcz., Lindera obtusiloba Blume and Acer pseudosieboldianum (Pax) Kom. in Daegu Arboretum, Palgong mt., Juwang mt. and Gaya mt. The change in temperature was caused by an increase in the monthly average temperature between March and April compared to February for nine years, and the average temperature of Daegu Arboretum and Palgong mt. were higher by region. The sprouting, flowering and leaf unfolding were the fastest of the Lindera obtusiloba and the slowest of the Pinus densiflora for each species, and the fastest plant season in Daegu arboretum came. SPI (Spring Phytophenological Index) tends to advance by -1.267~-6.151/9 years, with the largest Pinus densiflora (-6.151/9 years), with the lowest rate of change for Rhododendron mucronulatum (-1.267 days/9 years). Species which shows significant values in sprouting, flowering and leaf unfolding is Rhododendron mucronulatum and Pinus densiflora, which correlate with the mean temperature of January to March. As a result of checking the time series change of SPI, the change rate in the four regions was all negative and the phenolocal index was all accelerating. Among them, the rate of change was greater in inland areas such as Daegu arboretum, Palgong Mt. and Gaya mt. and the rate of change was slightly lower in the case of Juwang mt., which is somewhat distant.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.37-44
• /
• 2013

It is well known that thermal deformation of electronic packages with Pb-Sn solder and with lead-free solder is significantly affected by material properties consisting the package, as well as those of the solder itself. In this paper, the method for determining coefficient of thermal expansion(CTE) of new material is established by using temperature characteristic of strain gages, and the CTE of molding compound are obtained experimentally. The temperature-dependent CTE of molding compound for Pb-Sn solder and that for lead-free solder are obtained by using strain measurements with well known steel specimen and aluminium specimen as reference specimens, and the CTE's are also measured non-contactly by using moire interferometry. Those results are compared, and the agreement between the two types of strain gage experiment and the moire experiment show the strain gage method used in this paper to be reliable. In the case of the molding compound for Pb-Sn solder, the CTE is measured as approximately $15.8ppm/^{\circ}C$ regardless of the temperature. In the case for the lead-free solder, the CTE is measured as of approximately $9.9ppm/^{\circ}C$ below the temperature of $100^{\circ}C$, and then the CTE is increased sharply depending on the temperature, and reaches to $15.0ppm/^{\circ}C$ at $130^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.36-42
• /
• 2010

FFT(Fast Fourier Transform) processor is one of the key components in the implementation of OFDM systems for many wireless standards such as IEEE 802.22. To improve the performances of FFT processors, various studies have been carried out to reduce the complexities of multipliers, memory interface, control schemes and so on. While the number of FFT stages increases logarithmically $log_2N$) as the FFT point-size (N) increases, the number of required registers (or, memories) increases linearly. In large point-size FFT designs, the registers occupy more than 70% of the chip area. In this paper, to reduce the memory size of IFFT for OFDM transmitters, we propose a new IFFT design method based on a combined mapping of modulated data, pilot and null signals. The proposed method focuses on reducing the sizes of the registers in the first two stages of the IFFT architectures since the first two stages require 75% of the total registers. By simulations of 2048-point IFFT design for cognitive radio systems, it is shown that the proposed IFFT design method achieves more than 38.5% area reduction compared with previous IFFT designs.

• Composites Research
• /
• v.26 no.3
• /
• pp.175-181
• /
• 2013

The evaluation and prediction for the absorbed energy, residual velocity, and impact damage are the key things to characterize the impact behavior of composite laminated panel subjected to high-velocity impact. In this paper, the method to predict the residual velocity and the absorbed energy of Carbon/Epoxy laminated panel subjected to high velocity impact are proposed and examined by using quasi-static perforation test and high-velocity impact test. Total absorbed energy of specimen due to the high-velocity impact can be grouped with static energy and kinetic energy. The static energy are consisted of energy due to the failure of the fiber and matrix and static elastic energy, which are related to the quasi-static perforation energy. The kinetic energy are consisted of kinetic energy of moving part of specimen, which are modelled by three modified kinetic model. The high-velocity impact test were conducted by using air gun impact facility and compared with the predicted values. The damage area of specimen were examined by C-scan image. In the high initial impact velocity above the ballistic limit, both the static energy and the kinetic energy are known to be the major contribution of the total absorbed energy.

• Korean Journal of Clinical Pharmacy
• /
• v.21 no.4
• /
• pp.297-304
• /
• 2011

배경: 골다공증은 골대사의 불균형으로 인해 골 흡수가 골 형성보다 많아져 골밀도가 감소함으로서 발생한다. 골다공증의 이상적인 치료목표는 골형성을 증가시키거나 골소실을 방지하여 골량을 현 상태로 유지하는 것이다. 따라서 향후 발생되는 골소실을 에방하는 것이 골다공증의 원칙적이고 효과적인 치료방법이 될 것이다. 본 연구에서는 흑효모 중 $Aureobasidium$ $pullulans$으로부터 유래한 폴리칸(베타-글루칸)이 중년여성의 골대사에 미치는 영향을 규명하고자 하였다. 연구방법: 골대사에 대한 폴리칸의 효과를 규명하기 위해 12주간의 무작위배정, 이중눈가림, 플라세보 대조 임상연구를 수행하였다. 총 60명(폴리칸 투여군30명, 플라세보 투여군 30명)의 중년 여성 피험자가 등록되어 이 중 총 58명의 피험자가 최종적으로 12주간의 임상연구를 종료하였다. 결 과: 폴리칸(150 mg/d) 투여 12주 후, 폴리칸 투여군은 요 중 Deoxypyridinoline (DPD) 농도가 유의적인 감소를 보였다($P$=0.014). 혈청 중 Osteocalcin(OSC) 농도는 두 군 모두에서 유의적으로 증가하였으며, bone-specific alkaline posphatase (bALP) 와 collagen type 1 cross-linked C-telopeptide (CTx)는 유의적 변화가 보이지 않았다. 폴리칸은 골밀도(BMD)와 혈청 부갑상선 호르몬(iPTH)에 대해 유의적인 변화를 보이지 않았으나, 24시간 요 중 Ca 배설량은 폴리칸 투여군에서 유의하게 감소되었다($P$=0.028). 또한 폴리칸 투여군에서 고밀도지단백 콜레스테롤(HDL-cholesterol) 농도의 증가 경향 및 중성지방(triglyceride)의 유의적인 감소가 보였다. 임상연구 기간 중에 발생한 이상반응은 두 군간에 유의적인 차이를 보이지 않았다. 결 론: 본 연구에서는 폴리칸이 골대사 및 지질에 대해 일부 개선효과가 있음을 보여주었다. 그러나, 골다공증 예방 측면에서 보다 장기적인 임상연구와 피험자 수를 확대하여 골대사 및 지질대사에 대한 폴리칸의 예방적 효과를 규명할 필요가 있을것으로 사료된다.