• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.7
• /
• pp.525-536
• /
• 2014

In this paper, GUI program for microspeaker system simulation program was developed and verified through closed box, vent box and 6th order bandpass enclosure system. By using the pseudo loudspeaker model concept, TS parameters and rear volume of microspeaker were identified. Their suitabilities were proved by comparing test results with simulations of electrical impedance and sound pressure response curves for the three box types; closed box, vent box and 6th order bandpass box. Also, MSSP was found to be effective regardless of the microspeaker's shape, either circular or rectangular shape. MSSP can be used for the microspeaker system simulation, and can give a general prediction of such as; sound pressure level curve, electrical impedance, diaphragm velocity and displacement curve according to multiple design parameters; diaphragm mass, compliance, force factor, front and rear volume, front and rear port's diameter and length.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.63-70
• /
• 2010

We developed a new punching system that generates pinholes expressing texts or images on a plastic plate. The pin-holed plate is used as a new glamorous display board reflecting colorful lights from the light emitting diode (LED) installed on the edge side of the plate. The four degree-of-freedom punching system was designed to make same multiple holes on four plastic plates simultaneously. For this motion, we designed a structure for a simultaneous motion of the system. For even reflection of the lights from texts or images on the board and fast production of the pin-holed boards, fast motion including precise position control is very important. We also built a PC-based integrated control system including a GUI program to help users easily design luminous texts or images on the plastic plate. Also, we conducted a performance test of the system to verify the punching speed and position control of the pin holes on the plate.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.268-270
• /
• 2005

본 논문에서는 온톨로지를 활용하여 생물학 데이터를 효율적으로 통합 검색하기 위한 XQuery일 확장 시스템을 설계하고 구현하였다. 이를 위해 본 논문에서는 먼저 공개 생물학 온톨로지 등인 GO, UMLS들로부터 의미 있는 정보를 추출하기 위한 생물학 온톨로지 API를 온톨로지별로 정의하였다. 정의된 온톨로지 API는 본 시스템에서 사용하는 XQuery의 사용자 정의 함수로써 포함되며 이 XQuery는 본 시스템에 내장된 XQuery Expander에 의해 확장되어 처리된다. 확장된 XQuery는 온톨로지를 이용함으로써 이질적인 구조와 용어로 이루어진 생물학 데이터들을 통합 검색 할 수 있으며, 온톨로지에 정의되어 있는 지식과 관계들을 확장검색에 활용함으로써 재현율을 획기적으로 높일 수 있다. 본 논문에서는 또한 XQuery의 작성을 용이하게 할 수 있도록 지원하는 GUI 환경도 구현하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5282-5300
• /
• 2017

Multi-hop cellular networks (MCNs) reduce the transmit power and improve the system performance. Recently, several research studies have been conducted on MCNs. The mobile relay selection scheme is a rising issue in the design of MCNs that achieves these advantages. The conventional opportunistic relaying (OR) is performed on the single factor for maximum signal-to-interference-plus-noise ratio (SINR). In this paper, a comprehensive OR scheme based on Bi-Target is proposed to improve the system throughput and reduce the relay handover by constraining the amount of required bandwidth and SINR. Moreover, the proposed algorithm captures the variability and the mobility that makes it more suitable for dynamic real scenarios. Numerical and simulation results show the superiority of the proposed algorithm in both enhancing the overall performance and reducing the handover.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.25-31
• /
• 2011

In this paper, we propose virtual building construction plans. For this, we compose the construction materials with components and assemble components in pattern. When we change assembled constructions, we can design the building efficiently with patterns if the parts are selected. Also through information analysis of material components or patterns, we can provide information which is necessary to a reconstruction to the designer. Using steal house method, the assembly functions were comprised of a wall, a room, a window, a door, roof etc. Also We explained the materials automatic extraction method which applies steal house.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.939-951
• /
• 2019

A novel empirical mode decomposition strategy based on Fourier transform and band-pass filter techniques, contributing to efficient instantaneous vibration analyses, is developed in this study. Two key improvements are proposed. The first is associated with the adoption of a band-pass filter technique for intrinsic mode function sifting. The primary characteristic of decomposed components is that their bandwidths do not overlap in the frequency domain. The second improvement concerns an attempt to design narrowband constraints as the essential requirements for intrinsic mode function to make it physically meaningful. Because all decomposed components are generated with respect to their intrinsic narrow bandwidth and strict sifting from high to low frequencies successively, they are orthogonal to each other and are thus suitable for an instantaneous frequency analysis. The direct Hilbert spectrum is employed to illustrate the instantaneous time-frequency-energy distribution. Commendable agreement between the illustrations of the proposed direct Hilbert spectrum and the traditional Fourier spectrum was observed. This method provides robust identifications of vibration modes embedded in vibration processes, deemed to be an efficient means to obtain valuable instantaneous information.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.161-179
• /
• 2004

The purpose of this study is to suggest practical experience to develop small sized e-Learning system. The system is designed to help lecturers can arrange interface, organize contents, submit examinations and assess learner's score with no professional computing skills. The system has three advantages. First, it reduced implementation period through the use of GUI. Second, it is ordered to be personalized to construct format of the whole interface. Third, it has operational convenience which can be implemented on PC based system. These personalized features are enabling Learning on Demand. Also, there is comparatively low cost and high effectiveness on e-Learning implementation which facilitating quick adoption of e-Learning in its lectures.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.353-356
• /
• 2017

앱 인벤터는 GUI 환경에서 블록 편집기를 사용하여 앱을 개발한다. 따라서 누구나 쉽게 앱 프로그래밍을 시작할 수 있다는 장점이 있다. 또한, 앱 인벤터의 공식 사이트의 gallery 공간에 공개된 수많은 공개 앱 소스(aia 파일)를 쉽게 구할 수 있기 때문에 다른 사람이 만든 앱의 소스를 그대로 가져다가 이미지만 바꿔서 자신이 만든 것처럼 앱을 공개할 수도 있다. 그러나 직접 블록 단위로 비교해보지 않고서는 표절이나 도용 여부를 판단하는 것은 쉽지 않다. 따라서 본 논문에서는 앱 인벤터로 개발한 앱들의 유사도를 자동으로 계산해주는 도구를 개발하였다. 원본 프로그램과 도용된 프로그램은 유사도가 높게 계산될 것임을 예상할 수 있기 때문에 유사도 계산 프로그램은 코드 도용을 확인하는 목적으로 활용될 수 있다. 본 논문에서 구현한 도구의 평가를 위해서 다양한 실험을 수행하였고, 실제로 유사도가 높았던 앱들이 서로 공통된 블록을 다수 포함하고 있음을 밝혀내었다. 이러한 실험결과를 바탕으로 우리가 개발한 도구가 앱 인벤터로 개발한 앱에 대해서 소스 표절이나 코드 도용을 탐지하는 목적으로 활용될 수 있을 것으로 기대한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.30-36
• /
• 1993

An expert system to help a novice engineer in designing midship section is developed. The system is developed based on a general-purpose expert system shell, NEXPERT. Firstly, the design knowledge is extracted from an existing rule scantling program. The knowledge has been grouped and structured into a hierarchy by applying object-oriented concepts. Secondly, the knowledge base is integrated with a database of existing ships and engineering analysis modules through the Application Programming Interface(API)technique. Graphical User Interface which is developed using Motif wiget set is adopted. These altogether enable construction of an user friendly expert system.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.