• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.35-42
• /
• 2014

The influence of sine wave striated surface roughness on load carrying capacity of a bearing is studied for thin film effect of slider bearing. A Reynolds equation appropriate for slider bearing is used in this paper for analysis and it is discussed using finite difference method of central difference scheme. For a slider bearing with sine wave simple roughness form, several parameters such as pressure, load capacity and shear stress of the bearing can be obtained and also this results can be stored in sequential data file for latter analysis. After all, their distribution can be displayed and analyzed easily by using the matlab GUI technique. The parameters such as amplitude, number of waviness and slope of the surface are used for discussing the load carrying capacity of the rectangular bearing. The results reported in this paper should be applied to the other slider bearing such as rectangular or round embossed surface of slider bearing.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1069-1074
• /
• 2006

자동차/선박/정보통신기기 등의 각종 제조 산업 분야에서 신제품 개발기간과 비용단축을 위해 제품의 설계/스타일링 단계에서 디자인 및 사용자 사용성/편이성 등에 대해 가상으로 품평하는 기술에 대한 관심이 날로 증가하고 있다. 이상적인 가상 품평 기술은 사용자가 실물에 대한 품평 상황과 동일한 체험을 얻을 수 있도록 해야 한다. 이를 위해서 품평 대상물을 사실적으로 표현할 수 있도록 하는 실사 수준의 고품질 가시화 기술과 사용자가 품평 대상물을 자연스럽게 조작할 수 있는 상호작용 기술이 필요하다. 본 연구는 자동차의 내 외관 디자인 품평을 위한 가상 디자인 품평 시스템의 개발에 관한 것으로, 사실적인 자동차 가시화를 위한 환경 반사, 빛 산란, 범프 매핑등의 고품질 쉐이더 구현 및 저작 기술, 몰입환경에서 품평 작업을 위한 3D GUI 지원, 자동차 각 부품의 사용성/편이성 평가를 위한 운동성 조작 기능, 멀티프로젝션 디스플레이 시스템 및 3 차원 인간 모델, 장갑형 입력장치 지원을 통한 몰입형 가상 품평 환경 구축에 관한 기술 및 구현 방법을 제시하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.932-935
• /
• 2004

In this paper, we present a framework that is easy to develop, modify, maintain and extend a control and monitoring software for any kinds of instruments. The presented framework is composed of three XML documents (IID, MAP, and CMIML) and two tools (Virtual Instrument Wizard, Generator). Interface information about behaviors and states of instruments is written on IID. Mapping information between the interface information in IID and API of a real instrument driver is written on MAP. Finally information about control and monitoring software is written on CMIML. IID, MAP and CMIML are written with XML format to provide common usage and platform independence of the suggested framework. VI Wizard generates CMIML (platform independent intermediate document) using IID and existing CMIML, and Generator generates source code of a control and monitoring software (platform dependent code) automatically using CMIML and MAP. The suggested framework that automatically generates control and monitoring software based on GUI provides easy development and maintenance. Also, reusability can be increased by reusing platform independent software description documents.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.79-84
• /
• 1999

The existing EMTP(Electromagnetic Transients Program) is writted by FORTRAN-77, has a closed architecture and uses a large number of code lines to satisfy requirements ranging from low level data manipulation to the actual solution mathematics which eventually become diluted and almost impossible to visualize. Thus has a difficulty in the development and maintenenace of its program module. This paper proposes a new design idea suitable (or a re-development of EMTP using the MATLAB and VISUAL-C++, which presents the development of the new EMTP package is operated in the window environment. The package has the GUI(Graphic User Interface) ability, and the MATLAB computation engine for an analysis of a transient state in an electric circuit.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.5
• /
• pp.411-417
• /
• 2016

Theoretical IPMSM control technique is complicated, and reliability is low because of the changing parameters. Further, in case of general look-up table designing method which obtains torque characteristics (according to current and speed) or torque characteristics (according to magnetic flux through the entire control region), obtaining a precise result can be difficult and has the disadvantage taking too much time to establish a current look-up table. In this paper, the new auto maximum torque point tracking (MTPT) algorithm that automatically finds the optimum stator d - q axis electric current reference through the entire speed region is devised; consequently, it could establish a 3D look-up table with torque characteristics according to current and speed. In case of using the devised auto MTPT algorithm, the result value detailed was obtained in comparison with the generalized look-up design technique, and checked to reduce the current look-up table establishment time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.711-717
• /
• 2014

Global path planning for autonomous driving of unmanned ground vehicle is essential. When setting global path planning, its accuracy and effectiveness is increased if useful information such as terrain type of driving route has been reflected on global path planning. As a method to reflect the terrain type, there is a method to perform global path planning by applying the weight to each terrain type. At this time, how to assign appropriate weights corresponding to the terrain type is more important than anything. In this paper, we proposed a method to determine the weight for terrain type that may affect the results of global path planning. Moreover, we presented effective operation method and design results(GUI) to check the possibility of the use of the proposed method.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.125-129
• /
• 2009

In this paper automatic 3D wing shape modeling program is introduced. The program is developed in Visual Basic based on Net Framework 3.5 environment by using CATIA COM Library, and it is used together with CATIA system to model 3D wings with or without flaps. With this program users can easily construct wing models by specifying geometry parameters which are usually design variables with the aid of easy-to-use GUI environment, and specifying sectional airfoil data is done either by using analytic shape functions such as NACA series airfoils or by providing input files with point data describing the airfoil shape. When all the input parameters are provided, users can either work further with the model in the CATIA system which would be automatically started by the program or save the resultant model in the format of users choice. Unstructured grid generation program is also briefly described which can make grid generation task for a 3D wing easy and efficient one when used together with the wing modeling program by choosing STL format as the model's output format.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.45-46
• /
• 2003

A process control system has been developed for measurement and characterization of the nanofiber web qualities. The nano-fiber information system (NAFIS) developed consists of a measurement device and an analysis algorithm, which are a microscope-laser sensor fusion system and a process information system, respectively. It has been found that NAFIS is so successful in detecting irregularities of pore and diameter that the resulting product has been quitely under control even at the high production rate. Pore distribution, fiber diameter and mass uniformity have been readily measured and analyzed by integrating the non-contact measurement technology and the random function-based time domain signal/image processing algorithm. Qualifies of the nano-fiber webs have been revealed in a way that the statistical parameters for the characteristics above are calculated and stored in a certain interval along with the time-specific information. Quality matrix, scale of homogeneity is easily obtained through the easy-to-use GUI information. Finally, ANFIS has been evaluated both for the real-time measurement and analysis, and for the process monitoring.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.3
• /
• pp.39-52
• /
• 2004

Icons are the main element of the graphic user interface (GUI). They can help users perform effectively on the computer, especially when the icons reflect user`s mental model. However, few studies in Korea represented Korean users` mental models in icon design. The purpose of this study, therefore, was to ascertain whether existing icons agreement with Korean twentieth mental model, and to deduce properties of Korean twentieth mental model. To do that, 10 icons from two commercially available toolbar-icons of word processing programs were compared with the newly developed icons, which were developed to represent Korean user`s mental modelthrough interviews, surveys, and mental model sketches. The results show that five new metaphors were found: a dog-eared part on the bottom right corner new for new document, a magnifying glass for search, a red pencil for spell-check, `＋` and `` signs in the magnifying glass for zoom, and a yellow post-it for paste. These new icons were preferred to the existing. Korean twentieth users preferred rather complex and dynamic icons than simple and static ones even though icon development guideline said simple icons are better.