• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.28-30
• /
• 2012

본 논문에서는 시계열 매칭 기술을 활용한 스케일링-불변 윤곽선 이미지 매칭 시스템을 설계 및 구현한다. 윤곽선 이미지를 시계열로 나타낼 경우, 스케일된 유사 이미지들을 찾는데 거리 계산이 용이해지고, 인덱스 사용이 가능하여 대용량 데이터베이스 대상의 빠른 검색이 가능해지게 된다. 이를 위해, 기존연구 내용을 기반으로 사용자의 편의를 위해 GUI 환경의 클라이언트-서버 시스템으로 설계 및 구현한다. 먼저, 클라이언트에서는 사용자의 질의 이미지를 시계열로 변환하여 가로 및 세로의 스케일링 팩터구간과 허용치 ${\varepsilon}$과 함께 서버에 전달한다. 서버에서는 클라이언트에서 전달한 값들을 이용하여 범위 질의를 구성하여 이미 구축해놓은 이미지 시계열 데이터베이스의 인덱스를 통해 유사 이미지들을 찾은 후 그 결과 이미지들을 클라이언트로 전달한다. 구현 결과, 스케일링-불변 윤곽선 이미지 매칭은 직관적이고 정확한 매칭을 수행하는 것으로 나타났다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1986-1991
• /
• 2007

In this paper, we discussed, intelligent soft filter for MR(magnetoresistive) sensor. Most navigation systems today use some type of compass to determine heading direction. Using the earth's magnetic field, electronic compass based on MR(magnetoresistive) sensors can electrically resolve better then 0.1 degree rotation. Intelligent methode for soft building a one degree compass using MR(magnetoresistive) sensors will also be discussed. Compensation techniques are shown to correct for compass tilt angels and nearby ferrous material disturbances. we proved the fuzzy logic that based on the way the ham deals with inexact information is useful for MR sensors.

• Geomechanics and Engineering
• /
• v.19 no.4
• /
• pp.307-314
• /
• 2019

Light construction waste (LCW) particles are pieces of light concrete or insulation wall with light quality and certain strength, containing rich isolated and disconnected pores. Mixing LCW particles with soil can be one of the alternative lightweight soils. It can lighten and stabilize the deep-thick soft soil in-situ. In this study, the unconfined compressive strength (UCS) and its mechanism of Construction Waste Stabilized Lightweight Soil (CWSLS) are investigated. According to the prescription design, totally 35 sets of specimens are tested for the index of dry density (DD) and unconfined compressive strength (UCS). The results show that the DD of CWSLS is mainly affected by LCW content, and it decreases obviously with the increase of LCW content, while increases slightly with the increase of cement content. The UCS of CWSLS first increases and then decreases with the increase of LCW content, existing a peak value. The UCS increases linearly with the increase of cement content, while the strength growth rate is dramatically affected by the different LCW contents. The UCS of CWSLS mainly comes from the skeleton impaction of LCW particles and the gelation of soil-cement composite slurry. According to the distribution of LCW particles and soil-cement composite slurry, CWSLS specimens are divided into three structures: "suspend-dense" structure, "framework-dense" structure and "framework-pore" structure.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.81-86
• /
• 2019

According to the needs of many users, motor pumps have been steadily developed and widely used in many industries where fluids are used. Motor pumps are used in a variety of environments, degrading quality and performance. It is becoming important to monitor the condition of motor pumps in order to maintain system performance and increase efficiency. This paper presents the method for effectively monitoring the condition of motor pumps. The designed MMI controller receives the collected data through data logging and output and controls the motor pump with touch screen. Implementing a Wi-Fi monitoring system and SCADA monitoring system based on Ethernet and RS485, user can monitor even if the user is far from the MMI controller without time and space limitation. In addition, by implementing a voice output system, the user can immediately recognize the situation through the sound. Therefore, through the proposed method, multi-monitoring system solves the cause of breakdowns and degradation of motor-pump and gives the possibility of commercialization by providing the convenience of maintenance to users.

• Steel and Composite Structures
• /
• v.39 no.3
• /
• pp.319-335
• /
• 2021

This study proposes a new and highly-accurate artificial intelligence model, namely ANN-IP, which combines an interior-point (IP) algorithm and artificial neural network (ANN), to improve the axial compression capacity prediction of elliptical concrete-filled steel tubular (CFST) columns. For this purpose, 145 tests of elliptical CFST columns extracted from the literature are used to develop the ANN-IP model. In this regard, axial compression capacity is considered as a function of the column length, the major axis diameter, the minor axis diameter, the thickness of the steel tube, the yield strength of the steel tube, and the compressive strength of concrete. The performance of the ANN-IP model is compared with the ANN-LM model, which uses the robust Levenberg-Marquardt (LM) algorithm to train the ANN model. The comparative results show that the ANN-IP model obtains more magnificent precision (R² = 0.983, RMSE = 59.963 kN, a20 - index = 0.979) than the ANN-LM model (R² = 0.938, RMSE = 116.634 kN, a20 - index = 0.890). Finally, a new Graphical User Interface (GUI) tool is developed to use the ANN-IP model for the practical design. In conclusion, this study reveals that the proposed ANN-IP model can properly predict the axial compression capacity of elliptical CFST columns and eliminate the need for conducting costly experiments to some extent.

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.169-187
• /
• 2019

This work presents a practical detailed finite element (FE) approach for the three-dimensional (3D) free-vibration analysis of actual aircraft and spacecraft-type lightweight and thin honeycomb sandwich panels. It consists of calling successively in $MATLAB^{(R)}$, via a developed user-friendly GUI, a detailed 3D meshing tool, a macrocommands language translator and a commercial FE solver($ABAQUS^{(R)}$ or $ANSYS^{(R)}$). In contrary to the common practice of meshing finely the faces and core cells, the proposed meshing tool represents each wall of the actual hexagonal core cells as a single two-dimensional (2D) 4 nodes quadrangularshell element or two 3 nodes triangular ones, while the faces meshes are obtained simply using the nodes at the core-faces interfaces. Moreover, as the same 2D FE interpolation type is used for meshing the core and faces, this leads to an automatic handling of their required FE compatibility relations. This proposed approach is applied to a sample made of very thin glass fiber reinforced polymer woven composite faces and a thin aluminum alloy hexagonal honeycomb core. The unknown or incomplete geometric and materials properties are first collected through direct measurements, reverse engineering techniques and experimental-FE modal analysis-based inverse identification. Then, the free-vibrations of the actual honeycomb sandwich panel are analyzed experimentally under different boundary conditions and numerically using different mesh basic cell shapes. It is found that this approach is accurate for the first few modes used for pre-design purpose.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2475-2490
• /
• 2022

The Accident Tolerant Fuel (ATF) is a new concept of fuel, which can not only withstand the consequences of the accident for a longer time, but also maintain or improve the performance under operating conditions. ISAA is a self-developed severe accident analysis code, which uses modular structures to simulate the development processes of severe accidents in nuclear plants. The basic version of ISAA is developed based on UO₂-Zr fuel. To study the potential safety gain of ATF cladding, an improved version of ISAA, referred to as ISAA-ATF, is introduced to analyze the station blackout accident of PWR using ATF cladding. The results show that ATF cladding enable the core to maintain a longer time compared to zirconium alloy cladding, thereby enhancing the accident mitigation capability. Meanwhile, the generation of hydrogen is significantly reduced and delayed, which proves that ATF can improve the safety characteristics of the nuclear reactor.

• Geomechanics and Engineering
• /
• v.35 no.1
• /
• pp.81-93
• /
• 2023

Due to the unclear mechanism of the influence of temperature on the resonance problem of doubly curved shells, this article aims to explore this issue. When the ambient temperature rises, the composite structure will expand. If the thermal effects are considered, the resonance response will become more complex. In the design of structure, thermal effect is inevitable. Therefore, it is of significance to study the resonant behavior of doubly curved shell structures in thermal environment. In view of this, this paper extends the previous work (She and Ding 2023) to the case of the nonlinear principal resonance behavior of graphene platelet reinforced metal foams (GPLRMFs) doubly curved shells in thermal environment. The effect of uniform temperature field is taken into consideration in the constitutive equation, and the nonlinear motion control equation considering temperature effect is derived. The modified Lindstedt Poincare (MLP) method is used to obtain the resonance response of doubly curved shells. Finally, we study the effects of temperature changes, shell types, material parameters, initial geometric imperfection and prestress on the forced vibration behaviors. It can be found that, as the temperature goes up, the resonance position can be advanced.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.654-657
• /
• 2011

Gartner에 따르면 현재 IT산업에서 배출하는 Co2의양은 전 세계 배출량의 2%에 해당하고, 국내 IT기기의 탄소 배출량은 1,750만톤, 2012년에는 2,110만 톤으로 증가할 것으로 예상하고 있다. 이 중 전 세계 기업의 전산설지 전력 소비량은 1척억kWh가 소모되고 있으며, 서버의 전력소모량은 매년 20%씩 증가할 것으로 보고 있다. 또한 IT 시설물은 이산화탄소가 배출되는 7%의 가장 높은 비율을 차지하고 있다. 이에 따라 에너지 경비 절감 및 효율성을 높이고 탄소 배출량 감소를 위한 기술 및 솔루션 개발을 위한 그린 IT기술의 필요성이 높아지고 있다. 이러한 IT 시설물의 에너지 사용량을 실시간으로 확인, 온 습도 센서를 통한 자료 분석을 통하여 대상시설에 맞는 탄소배출량을 환산하여, 이를 활용한 에너지 시설의 제어를 통해 탄소배출과 경비를 절감시키는 시스템이 스마트탄소 통합관제시스템이다. 그리하여 본 논문에서는 통신 프로토콜 단에서부터 '관제'시스템의 성격에 맞고, 저장소의 공간을 효율적이고, 탄소 배출량을 감축시키는데 일조하는 스마트탄소 통합관제시스템의 프로토콜을 설계하고, 이를 테스트 하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.201-204
• /
• 2021

본 연구에서는 휴대 할 수 있는 선형 LED 전광봉으로 2차원 LED 전광판 효과의 구현을 시도하였다. 전광봉을 회전하면 전광판의 효과가 나도록 구성한 것으로, adafruit의 스트립(strip) 형 네오픽셀(NeoPixel) 1 × 16 LED으로 형성되는 구조물을 만들고, 이를 제어 할 수 있는 회로와 제어 프로그램을 설계하고 구현하였다. 구현한 전광봉은 큰 전력 소모에도 문제없도록 리튬 이온 충전지를 이용하여 전원이 공급되도록 하여 휴대성을 구현하였고, 블루투스 칩이 부착된 아두이노를 이용하여 하드웨어 구성을 완료하였다. 아두이노에는 C++를 이용하여 전광봉으로 전광판 효과를 볼 수 있도록 LED들을 통제하는 제어용 프로그램을 구성하였을 뿐 아니라 블루투스를 이용한 스마트 폰과 통신할 수 있는 프로그램을 구현하였다. 대략 6도 단위로 LED가 제어 되도록 하여 1회전에 16 × 60 정도의 전광판 효과를 볼 수 있다. 스마트 폰에는 원하는 전광판을 구성할 수 있도록 색상 팔레트 형성 기능과, 통제용 전광판의 크기를 결정 기능, 크기가 결정된 전광판에서 원하는 색으로 홍보용 내용이 불이 켜질 수 있도록 전광판 구성 기능, 구성된 전광판 자료를 CSV(Comma Separate Value) 파일로 저장하고, 전광봉으로 보낼 수 있는 기능을 구성하였다.