• Journal of Society of Preventive Korean Medicine
• /
• v.14 no.3
• /
• pp.37-49
• /
• 2010

Objective : Qigong has been reported as an effective for post-mastectomy women. It consists of a series of postures combined with slow, smooth, graceful movements, and is considered a low intensity exercise. In this study, a specialist of Qigong developed a Qigong program for post-mastectomy women in a community. The object of this research is to evaluate the effect of Qigong on a subjective symptom scale, on the grade of discomfort and pain in everyday life, BMI, fat(%), muscular strength, shoulder joint movement, in post-mastectomy women. Methods : The study used a non-equivalent control group non-synchronized design. The experimental group received a Qigong 3 times a week for 12 weeks from September 7th to December 28th in 2009. The subjects were 40 patients are divided into 25 persons in experimental groups and 15 persons in contrastive group. The data were analyzed with descriptive statistics, chi-square test, t-test, Mann-Whitney U test. A P-value less than .05 was considered significant by 2-tailed test. All statistical analyses were performed with SPSS win(ver 12.0). Results : The results were as follows : The score in the subjective symptom(p=.040), and score of anxiety (p=.024), fat(%)(p=.007) were significantly decreased after Qigong program. The values for shoulder flexibility (left : p=.010, right : p=.008), and Muscular strength(grip power)(left : p=.021, right : p=.029) significantly increased after Qigong program. And Flexion(left ; p=.029), Extension(left : p=.001, right : p=.038), Adduction(left ; p=.001, right ; p<0.001) were also significantly increased after Qigong Conclusions : The Qigong is an effective health promotion program for post-mastectomy women.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.31-37
• /
• 2020

The purpose of this study was to investigate the Effect of transcranial direct current stimulation convergence task-oriented training combined with vibration stimulation on hand dexterity and upper limb function in stroke patients. One time 30 minutes 5 times a week for 4 weeks. experimental group of transcranial direct current stimulation convergence task-oriented training combined with vibration stimulation and control group of the task-oriented training combined with vibration stimulation were divided into 10 members. Hand dexterity and upper limb recovery were measured. The experimental group and the control group showed significant improvement in hand dexterity and grasping(p<.05), grasping, and gross movement(p<.05). The experimental group showed a significant improvement in hand dexterity and grasp and grip than the control group. Effect size showed more than small effect in all evaluation items. Based on the results of this study, it is considered that more effective and efficient rehabilitation treatment can be performed in the clinic.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.197-206
• /
• 2006

Statement of problem: One of common problems associated with single teeth dental implant prosthetic is the loosening of screws that retain the implants. Purpose: The maintenance of screw joint stability is considered a function of the preload achieved in the screw when the suggested initial tightening torque is applied. The purpose of this study was to investigate acquired preload after initial clamping torque for estimating screw joint stability. Material and methods: A comparative study on the effect of initial clamping of two types of implant systems with different connections was conducted Three dimensional non-linear finite element analysis is adopted to compare the characteristics of screw preloads and stress distributions between two different types of implant systems composed with abutment, screw, and fixture under the same loading and boundary conditions. Results: 1. When the initial clamping torque of 32Ncm was applied to the implant systems, all types of implants generated the maximum effective stress at the first helix region of screw. 2. Morse taper connection types of implants generate lower stress distributions compared to those by butt joint connection types or implants due to large contact surface between abutment and fixture. 3. The internal types of implant systems with friction grip type implant systems have higher resistance to screw loosening than that of the external types of implant systems since the internal types of implant systems generated larger preload than that generated by the external types for the same tightening moments.

• Journal of the Korea Furniture Society
• /
• v.23 no.4
• /
• pp.364-371
• /
• 2012

I designed a dietary life kitchen utensils which is focused by the shape of split bamboo that has meaning of health and safety and the shaman who is the religion and incantation performer, and who solve problems, which are impossible to solve in common methods, by borrowing the power and granting the meaning which is connected with transcendent existence and principal. Having closest relation with human being's diet culture is being changed with adding beauty instead of the part of simple practical aspect in our normal life. I tried to show incantation effect with keeping the characteristic of kitchen utensils by granting the symbolic meaning of shamanism which is the shelter that is projected the desire of human beings. the materials were produced of an ebony and steel and varnished with lacquer for coloring. For hand shape, which is hard to treat in irregular forms, the religious image of shamanism was formed by casting which expresses the touch of an ebony and the cold characteristic of metal. an overall design doesn't detail excessively distort or largely transform the form of dietary utensils, keeps its individuality, and emphasizes the image by figuring a grip part which a human can see and a body can approach. in addition, I try to show a point that shamanism has affected human life for long time and symbolic meaning of bamboo-shape shows health and safety. And these things vest with each dietary life tools and should be the role of enzyme about the effect of human life.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.2
• /
• pp.99-108
• /
• 2013

The purpose of this study was to analyze the kinematic characteristics of javelin to compare the characteristics between world elite athletes and local male athletes. The subjects selected 9 athletes out of total 13 athletes recorded more than 65 m in the preliminary and main competition participated in the 93rd National Sports Festival held in 2012. Three-Dimensional motion analysis using a system of 4 video cameras(Sony HXR-MC2000) at a sampling frequency of 60 fields/s was performed for this study. The Kwon3D 3.1 was used to obtain the three dimensional coordinates about the top, grip, end of javelin. And the kinematic factors of javelin calculated using Matlab2009a program. The resultant speed of javelin that affects directly to the record of performance showed 26.08 m/s indicated lower speed of about 2-3 m/s than world elite athletes. The release point appeared to have been made at the high of $1.79{\pm}0.07$ m of 99.8% of the height of the athletes. In terms of release angle, it was indicated average $33.0{\pm}3.81^{\circ}$ lower release angle compared to the world elite athletes. The attitude angle(up & down tilt angle, X axis) related to javelin indicated average $38.5{\pm}4.96^{\circ}$, its related attack angle average $5.5{\pm}5.11^{\circ}$, and yaw angle(sideslip, side attack angle) average $15.7{\pm}8.48^{\circ}$.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.596-603
• /
• 2011

The very high temperature gas reactor (VHTR) is one of the next generation nuclear reactors for its safety, long-term stability, and proliferation-resistance. The high operating temperature of over 800$^{\circ}C$ enables various applications with high energy efficiency. Heat is transferred from the primary helium loop to the secondary helium loop through the intermediate heat exchanger (IHX). The IHX material requires creep resistance, oxidation resistance, and corrosion resistance in a helium environment at high operating temperatures. A Ni-based superalloy such as Alloy 617 is considered as a primary candidate material for the intermediate heat exchanger. In this study, the microstructures of Alloy 617 crept in pure helium and air environments at 950$^{\circ}C$ were observed. The rupture time in helium was shorter than that in air under small applied stresses. As the exposure time increased, the thickness of outer oxide layer of the specimens clearly increased but delaminated after a long creep time. The depth of the carbide-depleted zone was rather high in the specimens under high applied stress. The reason was elucidated by the comparison between the ruptured region and grip region of the samples. It is considered that decarburization caused by minor gas impurities in a helium environment caused the reduction in creep rupture time.

• Archives of Reconstructive Microsurgery
• /
• v.14 no.2
• /
• pp.152-156
• /
• 2005

Purpose: We reconstructed the thumb with groin flap combined with secondary heterodigital neurovascular island flap and report our 6 cases. Materials and Methods: Between March 2003 and August 2004, 6 degloving thumbs or amputation of thumbs were reconstructed with groin flap combined with secondary heterodigital neurovascular island flap. There ware 4 men and 2 women, and mean age was 42.2 years. The following parameters were evaluated. Results: Recipient thumb was no limitation of apposition. but flexion contracture of interphalangeal joint was about 10 degree in two cases. Average grip power were 80% and average pinch power were 70% that of the normal thumb. The two point discrimination was average 10.5 mm and double sensibility in 2 cases. 2 patients have cold intolerance. Neuroma formation was not made. Cosmetic results as judged by patients were that 4 cases are good and 2 cases are fair. Conclusion: If massive skin defect after degloving thumb or amputation of thumb are present, we consider the numerous methods for reconstruction of thumb. This surgical procedure is good methods because of it's pliability, sensation, satisfactory functional results but major disadvantage are the staged operation and cosmetic effect of the absence of thumb nail.

• Kidney Research and Clinical Practice
• /
• v.37 no.4
• /
• pp.404-413
• /
• 2018

Background: Dynapenic obesity and sarcopenic obesity increase cardiovascular disease (CVD) and mortality in nonuremic patients. The present study was designed to determine the prevalence of dynapenic obesity and sarcopenic obesity and their associations with CVD risk factors in peritoneal dialysis (PD) patients. Methods: All eligible PD patients in Tehran peritoneal dialysis centers were included in this cross-sectional study. Skeletal muscle mass and fat mass were assessed using bioelectrical impedance analysis. Muscle strength and physical performance were determined using hand grip strength and a 4-meter walk gait speed test, respectively. In addition, a 5-mL blood sample was obtained from each patient. Results: The prevalence of dynapenic obesity and sarcopenic obesity were 11.4% and 3.8% in PD patients, respectively. Serum high-sensitive C-reactive protein (hs-CRP), soluble intercellular adhesion molecule type 1, triglyceride, total cholesterol, and low-density lipoprotein cholesterol were significantly higher in PD patients with dynapenic obesity than in dynapenic nonobese and nondynapenic nonobese patients. Similarly, serum concentrations of CVD risk factors in PD patients with sarcopenic obesity were higher than in nonsarcopenic nonobese patients, but these differences were statistically significant only for serum hs-CRP and triglyceride. In addition, muscle strength and skeletal muscle mass percentage were negatively associated with markers of inflammation and dyslipidemia, whereas body fat percentage was positively associated with these CVD risk factors. Conclusion: This study indicates that although the prevalence of dynapenic obesity and sarcopenic obesity are relatively low in PD patients, these disorders may be associated with CVD risk factors.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.167-174
• /
• 2019

In this paper, We propose the purpose the examine the physical factors that influence the success rate during the endotracheal intubation and to provide the basic data for effective intubation success. The subject of this study was 42 students in emergency rescue department who had completed the BLS Health Care-provider and a specialized airway maintenance course dealing with endotracheal intubation and it is a similar experimental study after the non-equivalence single group. For data analysis, SPSS 23.0 Version was used. The study methods were measuring the grip fotce of subjects, the angle of arm during intubation tube, distance from manikin, palm length, etc. The results showed that there was a correlation between the time of successful endotracheal intubation and the physical characteristics. In particular, when performing endotracheal intubation, it was related to the angle of the arm and the execution time of the performer, and the narrower the angle of the arm, the shorter the execution time. The results of this study suggest that successful endotracheal intubation could be implemented if the operator tried to reduce the angle of the arm when performing endotracheal intubation, and through further research on various job groups, identify the possibility of clinical use will be necessary.

• Steel and Composite Structures
• /
• v.9 no.4
• /
• pp.381-395
• /
• 2009

This paper presents the details of an advanced Finite Element (FE) analysis of a plane steel portal frame with semi-rigid beam-to-column connections subjected cyclic loading. In spite of several component models on cyclic behaviour of connections presented in the literature, works on numerical investigations on cyclic behaviour of full scale frames are rather scarce. This paper presents the evolution of an FE model which deals comprehensively with the issues related to cyclic behaviour of full scale steel frames using ABAQUS software. In the material modeling, combined kinematic/isotropic hardening model and isotropic hardening model along with Von Mises criteria are used. Connection non-linearity is also considered in the analysis. The bolt slip which happens in friction grip connection is modeled. The bolt load variation during loading, which is a pivotal issue in reality, has been taken care in the present model. This aspect, according to the knowledge of the authors, has been first time reported in the literature. The numerically predicted results using the methodology evolved in the present study, for the cyclic behaviour of a cantilever beam and a rigid frame, are validated with experimental results available in the literature. The moment-rotation and deflection responses of the evolved model, match well with experimental results. This proves that the methodology for evolving the steel frame and connection model presented in this paper is closer to real frame behaviour as evident from the good comparison and hence paves the way for further parametric studies on cyclic behaviour of flexibly connected frames.