• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.18-22
• /
• 1963

1. Objects The experiments of catalytic aharcoaling were carried out for the fallowing purposes. (1) To determine the economically desirable amount of catalytic materials to be used when a catalytic charcoaling is practiced. (2) To observe the rate of carbonization of non-treated charcoal wood when the catalytic charcoaling is proceeded in the same charcoal pit. 2. Meterials (1) Small sample chips made of oak (Q. accutissima Carr.), measured by 0.5cm in width and thickness, respectively, and 1cm in length, were used as charcoal wood in each experiment. (2) Ammonium chloride was used as a catalytic material and electric kiln as a charcoaling apparatus. 3. Experiment (1) The sample chips were put into a electric oven for three hours at the temperature $60^{\circ}{\sim}70^{\circ}C$ in order to reduce some water contents. (2) Oven dried sample chips were then soaked for an hour in solution of ammonium chloride. Three kinds of solution were prepared, that is, 2.5%, 5%, and 10%, solution in which the amount of ammonium chloride used was weighed at the rate of 0.5%, 1.0%, and 2.0% to the total weight of the sample chips, resppectivelly. (3) Soaked sample chips were put in the air for 12 hours to reduce some water contents, and then were put into electric oven for 2 hours at the temperature $105^{\circ}{\sim}110^{\circ}C$. (4) Dried sample chips were kept in a desiccator with control sample chips which were treated excarly the same process as the treated sample chips except only not using the ammonium chloride in the process of soking. (5) Sample chips kept in the desiccator were used at random in each charcoaling experiment. (6) Charcoaling in the electric kiln were carried out by using small crucibles with complete cover to reduce the amount of ash. At each charcoaling experiment four crucibles filled with sample ships, weighed about 20gr, were put into electric kiln. The charcoaling was continued for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. (7) In order to investigate the influence given by the gases produced during the catalytic charcoaling to the rate of carbonization of non-treated sample chips, the following experiment was done. (a) A crueible was divided into two parts by inserting a fine iron net at the middle of the crucible, and then non-treated sample chips, weighed about 10gr, were put in the upper part of the crucible and treated sample chips, weighed also about 10gr, were put in the under part. (b) The crucibles filled with two kinds of sample chips were put into a electric kiln for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. 4. Results. Results for two replications (with four crucibles in one replication) for each experiment designed are as follows : (1) The rats of carbonization of the non treated sample chips, and that of the treated sample chips with ammonium chloride at the rate of 1.5%, 1.0%, and 2.0% to the total weight of the sample chips used were averaged at 19.85%, 22.63%, 24.14%, and 26.60%, respectively. (2) The rats of carbonization of the non-treated sample chips were averaged at (a) 20.04% (0.5% treatment), (b) 20.28% (1.0% treatment), and (c) 20.61% (2.0% treatment) when the treated sample chips were carbonized in the same crucible.

• Genes and Genomics
• /
• v.40 no.12
• /
• pp.1351-1361
• /
• 2018

A new cold tolerant germplasm resource named glutinous rice 89-1 (Gr89-1, Oryza sativa L.) can overwinter using axillary buds, with these buds being ratooned the following year. The overwintering seedling rate (OSR) is an important factor for evaluating cold tolerance. Many quantitative trait loci (QTLs) controlling cold tolerance at different growth stages in rice have been identified, with some of these QTLs being successfully cloned. However, no QTLs conferring to the OSR trait have been located in the perennial O. sativa L. To identify QTLs associated with OSR and to evaluate cold tolerance. 286 $F_{12}$ recombinant inbred lines (RILs) derived from a cross between the cold tolerant variety Gr89-1 and cold sensitive variety Shuhui527 (SH527) were used. A total of 198 polymorphic simple sequence repeat (SSR) markers that were distributed uniformly on 12 chromosomes were used to construct the linkage map. The gene ontology (GO) annotation of the major QTL was performed through the rice genome annotation project system. Three main-effect QTLs (qOSR2, qOSR3, and qOSR8) were detected and mapped on chromosomes 2, 3, and 8, respectively. These QTLs were located in the interval of RM14208 (35,160,202 base pairs (bp))-RM208 (35,520,147 bp), RM218 (8,375,236 bp)-RM232 (9,755,778 bp), and RM5891 (24,626,930 bp)-RM23608 (25,355,519 bp), and explained 19.6%, 9.3%, and 11.8% of the phenotypic variations, respectively. The qOSR2 QTL displayed the largest effect, with a logarithm of odds score (LOD) of 5.5. A total of 47 candidate genes on the qOSR2 locus were associated with 219 GO terms. Among these candidate genes, 11 were related to cell membrane, 7 were associated with cold stress, and 3 were involved in response to stress and biotic stimulus. OsPIP1;3 was the only one candidate gene related to stress, biotic stimulus, cold stress, and encoding a cell membrane protein. After QTL mapping, a total of three main-effect QTLs-qOSR2, qOSR3, and qOSR8-were detected on chromosomes 2, 3, and 8, respectively. Among these, qOSR2 explained the highest phenotypic variance. All the QTLs elite traits come from the cold resistance parent Gr89-1. OsPIP1;3 might be a candidate gene of qOSR2.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.141-143
• /
• 2004

The experimental simulation welds using 3kinds of 70ksi titania based flux-cored consumables were performed on 24 inches 24.6-thick API 5L Gr. B pipe with relatively high current, over 300A and four different Post Weld Heat Treaonent(PWHT) conditions at $625^{circ}C$ were applied to each consumable test coupon. It is well known that, in common welding processes such as Submerged Arc Welding(SAW) or Flux Cored A.c Welding(FCAW), the cooling rates in as-deposited weld bead are normally so ,apid that actual precipitation of microalloy carbonitrides, Nb(C,N) or V(C,N) is not likely to occur in the as-welded weld metal, however, during stress relief or PWHT the operation of precipitation can reduce the impact properties of the weld metal. As results of mechanical testing, it is concluded that PWHT at $625^{circ}C$ is detrimental to weld metal impact toughness of Ti-B type flux- cored (FC) welding consumables regardless of the amount of Nb and V, but two optima were exhibited, one at 800ppm Ti, 75ppm 5 and another 360ppm Ti, 54ppm 5.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.1
• /
• pp.29-35
• /
• 2022

This study was conducted to investigate the seed storage method and seed germination characteristics of Synurus deltoides (Ait.) Nakai, a kind of wild vegetables. Several parameters affecting seed germination, such as germination temperature, chilling duration, imbibition duration, and storage method were evaluated. The seed germination of Synurus deltoides showed the highest germination rate (GR), promptness index (PI), germination performance index (GPI), mean daily germination (MDG) at 25℃. This implies that the optimum germination temperature was 25℃. And also, Seeds stored at -4℃, after 150 days showed relatively high germination rate about 98%. Therefore, The optimum germination temperature of Synurus deltoides was 25℃ and to increase the germination rate over 98% of Synurus deltoides, cold-wet storage 20 days treatments at 4℃ were effective in the improvement of seed germination.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.83-89
• /
• 2001

This study was conducted to test the Cd accumulation and Cd-tolerance of Pisotithus tinctorius(Pt). Pt was isolated from Pinus thunbergii forest in Muan, Chonnam Province in 1997. Pt was cultured on MMN medium supplemented with $CdSO_4{\cdot}5H_2O$ at the final concentration of 0, 0.2, 0.5, 2, and $10{\mu}g/m{\ell}$ for 40 days. Growth rate and tolerance index of the fungus were measured every week, while Cd concentration, superoxide dismutase(SOD), and glutathione reductase(GR) of the fungus were analyzed at the end of the culturing, Pt showed growth reduction in vitro at $2{\mu}g/m{\ell}$ Cd in the medium and almost stopped growth at $10{\mu}g/m{\ell}$ Cd. Tolerance index of Pt decreased with increasing Cd concentration. Cd concentration of Pt was the highest at $10{\mu}g/m{\ell}$ Cd. Activities of SOD did not show significant difference between Cd concentrations, but GR of Pt increased at $0.5{\mu}g/m{\ell}$ Cd, and decreased at $2{\mu}g/m{\ell}$ Cd. Consequently Pt could be called Cd accumulator with a tolerance mechanism to Cd. Their tolerance to Cd were expressed through the higher production of antioxidants such as GR. Pt may be used for revegetation and decontamination of soil polluted by heavy metals.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.10-20
• /
• 1992

강조류하의 인공 구조물 주변 해저 침식 및 재퇴적 현상을 연구하기 위하여 1987년 8월 24일 부터 9월 26일 까지 경기만에 발달한 조류성 사퇴위에서 현장 실험을 실시하였다. 인공구조물(원통 물체) 주변에 발달한 침식 구조는 전체적으로는 타원형으로 접시모양을 하고 있으며, 후류 및 이차류에 의한 복합 침식작용에 의한 것으로 분석되었다. 아울러 연속적인 침식구조 크기 측정자료를 이용 산술적으로 침식율$(1.5-20m_3/day)$및 재퇴적율(0.13-0.18gr/cm/sec)를 추정하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.11-18
• /
• 1986

Schooling behavier to a fishing gear and estimation of the volume of fish school in set net have ~ been studied by making use of such techniques as visual observations, underwater cameras, under- water televison. However, all of these observation techniques are subject to restrictions caused by illumination, underwater visibility, underwater transparent and sea conditions. For the above mentioned reasoa, one of the most effective method by this time become generally known a method using fish finder. In this paper, in order to control the fishing ground of set net effectively and to develope the telemetric fish finder, the experiments for the target strength, underwater shape of fishing gear, schooling behavier and volume of fish school with fish finder were performed at Galgott fishing ground of set net located Keouje Island, 15th-24th July and 18th-20th October in 1985. The results of these experiment showed that a method using fish finder in fishing grOlllld of set net is available for estimating distribution and school size, fish behavier in relation to a fishing gear and underwater shape of fishing gears.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.423-440
• /
• 1994

The Samhwa iron ore deposit, which is of typical magnetite skarn type, is located in the Samhwadong area of Donghae city, Kangwon-do, Korea. Skarn minerals are mainly composed of garnet, clinopyroxene, vesuvianite, wollastonite and small amounts of epidote and quartz. The garnets are isotropic $(Ad_{92.82{\sim}98.37})$ or anisotropic andradite $(Ad_{45.30{\sim}75.85})$ and grossular $(Gr_{86.26{\sim}24.47})$, the clinopyroxenes are ferrosalite and salite, Homogenization temperature of gas rich two phase inclusions in garnet are $368{\sim}593^{\circ}C$, and salnities of polyphase inclusions in garnet have 33.9~68.4 equ. NaCl wt. %. Garnet grain often shows composional variation from its core to rim. In other words, Fe and Al contents in garnet vary inversely, which suggest that the variation depends upon $f_{o2}$ during skarn formation.

• Economic and Environmental Geology
• /
• v.24 no.1
• /
• pp.21-25
• /
• 1991

The studied Nonggeori and Naedeogri granites in the Sangdong area intruded into the Precambrian metasedimentary rocks of the Yulri Group. The Cambro-Ordovician Choseon Supergroup overlied unconformably upon the Yulri Group. Pegmatitic dykes injected into the Yulri Group and the granites, but not in the Choseon Supergroup. Field relationships suggest approximate ages of the intrusive rocks in the studied area belong to the Precambrian. Extremely pure concentrates of muscovites(40-80#) were obtained from the granites by conventional isodynamic magnetic separators. The contents of K and 40Ar in the muscovites show 8.60-8.78% and 98.52-99.11%, respectively. From the potassium contents of the muscovites and the approximate ages, the sample amounts for argon analyses are average of 0.00371gr. The K-Ar ages on the muscovites were revealed as Proterozoic ($1673{\pm}22{\sim}1802.5{\pm}17.5Ma$).

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.3143-3146
• /
• 2013