• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.774-780
• /
• 2017

The techniques for driving trajectory calculation and driving trajectory distribution calculation are proposed to analyze the durability of ground vehicles effectively. To achieve this aim, the driving trajectory of a vehicle and the driving trajectory distribution of that are needed, in addition to road profile. The road profiles can be measured by a profilometer but a driving trajectory of a vehicle cannot be acquired effectively due to a large position error from a conventional GPS sensor. Therefore two techniques are proposed to reduce the position error of a vehicle and achieve the distribution of driving trajectory of that. The driving trajectory calculation technique produces relative positions by using the velocity, time and heading of a vehicle. The driving trajectory distribution calculation technique produces distributions of the driving trajectory by using axis transformation, estimating reference line, dividing sectors and plotting a histogram of the sectors. As a results of this study, we can achieve the considerably accurate driving trajectory and driving trajectory distribution of a vehicle.

• 제어로봇시스템학회논문지
• /
• 제18권11호
• /
• pp.1065-1071
• /
• 2012

In this paper, we proposed a method for vehicle monitoring with trajectory reconstruction. For safety, it is important to monitor the driving habit of driver. Every year, many accidents occur due to the reckless driving of the driver. Continuous monitoring of the status of commercial vehicles is needed for safety through the entire path from start point to the destination. To monitor the reckless driving, we try to monitor the trajectory of the vehicle by using vehicle's lateral acceleration data. Compared with steering angle and lateral acceleration, these resemble each other. So, we find the relationship of steering angle and acceleration, and find the global direction of vehicle. We find the position of non-GPS section with EKF (External Kalman Filter) and reconstruct the whole trajectory during vehicle driving.

• 대한교통학회지
• /
• 제35권5호
• /
• pp.423-433
• /
• 2017

최근 5년간 집계된 고속도로 교통사고자료에 따르면 전체 사고건수의 20%, 사망자수의 30%가 졸음운전으로 발생되고 있다. 졸음사고는 운전자의 피로도가 누적되었을 때 주행능력을 상실한 운전자의 인적 요인으로부터 발생되며, 정성적으로 체감되는 피로도는 운전자의 연속주행시간을 통해 간접적으로 분석될 수 있다. 본 연구는 2시간 이상 연속 주행한 차량의 비율과 해당 링크에서 집계된 졸음사고간의 통계적 상관관계를 규명하는데 주된 목적을 둔다. 이를 위해 네비게이션 주행 궤적 자료를 활용하여 링크별 연속주행차량의 비율을 산출하였으며, 중부내륙 고속도로의 링크별 졸음사고 건수, 교통량, 구간길이를 변수로 하는 안전성능함수를 추정하였다. 본 연구에서는 다양한 형태의 안전성능함수가 추정되었으며, 도출된 통계치의 비교를 통해 연속주행시간과 졸음사고 발생간의 통계적 상관성이 다각적으로 분석되었다. 본 연구결과는 최근 화물차 및 여객버스 운전자의 연속주행을 단속하는 제도에 학술적 근거를 제공할 수 있을 것으로 판단하며, 궤적자료의 양적 질적 확대를 통해 향후 졸음방지 시설물의 설치 위치를 결정하는 전략 수립에 활용 가능할 것으로 기대한다.

• 정보와 통신
• /
• 제29권8호
• /
• pp.72-84
• /
• 2012

This paper introduces three vehicle trajectory-based data forwarding schemes, tailored for vehicular ad hoc networks. Nowadays GPS-based navigation systems are popularly used for providing efficient driving paths for drivers. With the driving paths called vehicle trajectories, we can make data forwarding schemes more efficient, considering the micro-scoped mobility of individual vehicles in road networks as well as the macro-scoped mobility of vehicular traffic statistics. This paper shows why the vehicle trajectory is a key ingredient in the design of the vehicle-to-infrastructure, infrastructure-to-vehicle, and vehicle-to-vehicle data forwarding schemes over multihop. Through the mathematical formulation, the key design techniques are shown for three forwarding schemes based on vehicle trajectory, compared with a state-of- the- art data forwarding scheme based on only vehicular traffic statistics.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.951-969
• /
• 2017

In this paper, we newly propose a traffic information service model that collects traffic information sensed by an individual vehicle in real time by using a smart device, and which enables drivers to share traffic information on all roads in real time using an application installed on a smart device. In particular, when the driver requests traffic information for a specific area, the proposed driver-personalized service model provides him/her with traffic information on the driving directions in advance by predicting the driving directions of the vehicle based on the learning of the driving records of each driver. To do this, we propose a traffic information management model to process and manage in real time a large amount of online-generated traffic information and traffic information requests generated by each vehicle. We also propose a road node-based indexing technique to efficiently store and manage location-based traffic information provided by each vehicle. Finally, we propose a driving learning and prediction model based on the hidden Markov model to predict the driving directions of each driver based on the driver's driving records. We analyze the traffic information processing performance of the proposed model and the accuracy of the driving prediction model using traffic information collected from actual driving vehicles for the entire area of Seoul, as well as driving records and experimental data.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1431-1438
• /
• 2013

A pack-level battery hardware-in-the-loop simulation (B-HILS) platform is implemented. It consists of dynamic vehicle models using PSAT and multiple control interfaces including real-time 3D driving and GPS mode. In real-time 3D driving mode, user can drive a virtual vehicle using actual drive equipment such as steering wheel and accelerator to generate the cycle profile of the battery. In GPS mode, actual road traffic and terrain effects can be simulated using GPS data while the trajectory is displayed on Google map. In the latter part of the paper, several performance tests of an actual lithium-polymer battery pack are carried out utilizing the developed system. All experiments are conducted as parts of actual development process of a commercial battery pack adopting 2nd generation Prius as a target vehicle model. Through the experiments, the low temperature performance and fuel efficiency of the battery are quantitatively investigated in comparison with the original nickel-metal hydride (NiMH) pack of the Prius.

• 한국항해항만학회지
• /
• 제33권9호
• /
• pp.603-608
• /
• 2009

In this paper, a 3m-class free running model ship will be introduced with its manoeuvring performance experiments. The results of turning circle test and zig-zag test will be explained. The developed system are equipped with GPS, main control computer, wireless LAN, IMU (Inertial Measurement Unit), self-propulsion propeller and driving rudder. Its motion can be controlled by RC (Radio Control) and wireless LAN from land based center. Automatic navigation is also available by pre-programmed algorithm. The trajectory of navigation can be acquired by GPS and it provides us with important data for ship's motion control experiments. The results of manoeuvring performance experiment have shown that the developed free running model ship can be used to verify the test of turning circle and zig-zag. For next step, other experimental researches such as ship collision avoidance system and automatic berthing can be considered in the future.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.867-874
• /
• 2021

4차 산업시대를 맞이하여 많은 공학 분야에서 IoT(Internet of Things)기술의 연계는 매우 중요한 쟁점이다. 최근 조선소에서도 디지털 조선, 스마트 팩토리 등의 개념을 구체화하고 있는 추세이다. 한편 자동차, 비행기 등에서 자율주행을 구현하는 연구는 매우 활발하고 일정 부분 상용의 형태로 나타나고 있다. 본 연구는 오픈 소스 아두파일럿 기반의 FC(Flight Controller) 및 RTK(Real Time Kinematic) GPS(Global Positioning System)를 이용하여 자율 주행 임무를 수행하는 보트의 주행성에 관한 연구로서 잔잔한 호수에서 실해역 실험을 수행하였으며 보트의 임무는 특정한 지점을 자율주행한 후 홈 위치로 스스로 돌아오는 과정에 대한 조종성 평가이다. 주어진 속도에서 기설정된 임무 궤적과 실 운항 궤적에 따른 차이를 분석하고 시스템의 보트 적용성에 대한 일련의 연구를 수행하였다. 또한 4개의 프로펠러를 가지는 OmniX 선체의 주행성을 분석하였으며 최대 48%의 주행 추적성 향상을 확인하였다.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.50-59
• /
• 2014

This paper proposes a method of localization of vehicle especially the horizontal position for the purpose of recognizing the driving lane. Through tracking road signs, the relative position between the vehicle and the sign is calculated and the absolute position is obtained using the known information from the regulation for installation. The proposed method uses Kalman filter for road sign tracking and analyzes the motion using the pinhole camera model. In order to classify the road sign, ORB(Oriented fast and Rotated BRIEF) features from the input image and DB are matched. From the absolute position of the vehicle, the driving lane is recognized. The Experiments are performed on videos from the highway driving and the results shows that the proposed method is able to compensate the common GPS localization errors.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.739-744
• /
• 2017

탄성변형과 피로손상은 카트의 주행성능에 영향을 미치는 것으로 카트 프레임에 영구변형을 유발할 수 있다. 카트프레임은 현가장치와 다른 장치를 포함하지 않으므로 두 가지 변형에 결정적인 영향을 미칠 수 있는 코너주행 시 동적 거동은 비틀림 변형이 원인이 된다. 선회주행 시 카트의 동적 거동을 분석하기 위해 카트의 GPS추적이 실시간으로 이루어지고 카트 프레임에 작용하는 비틀림 응력값을 측정하였다. 레저카트와 레이싱카트의 재료물성치들은 인장실험을 통해 얻었다. 비틀림 응력집중과 프레임 변형은 얻어진 결과 값을 토대로 프레임의 응력해석을 통하여 파악하였다. 개발된 주행분석장치를 이용하여 레저카트와 레이싱카트를 각 조건별로 실차실험을 수행하였고 이를 통한 코너에서 카트의 주행거동을 살펴보았다. 카트가 곡선주행 시 원심력으로 인해 하중이동이 발생하였으며 카트프레임에 비틀림 응력이 발생하였다. 예를 들어 레저카드의 경우, 40 km/h의 속도로 운전할 때 최대 비틀림 피로한도를 측정한 최대 비틀림응력은 230 MPa이며 비틀림 피로한도계수는 0.65를 나타내었다. 뿐만 아니라 카트의 선회 시 운전요소들을 운전측정시스템을 인스톨한 실측장비에서 측정하였으며 카트의 운전거동은 수직변위에 의해 측정하였다.