• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.285-289
• /
• 1995

This paper describes the determination of geoid using height data measured by GPS and Spirit Levelling. The GPS data of the 88 stations were used to determine the geoid undulation (N) which can be easily obtained by subtracting the orthometric height(H) from the ellipsoidal height(h). From the geoid undulation (N) calculated at each station mentioned above, geoid plots with a contour interval of 0.25 m were drawn using two interpolation methods. The following interpolation methods were applied and compared with each other: Minimum Curvature Method and Least Squares Fitted Plane. Comparison between geometric geoid and gravimetric geoid undulation by FFT technique was carried out.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.41-49
• /
• 2000

This study was performed to establish PC-based Urban Infrastructure Information System(UIIS) using GPS and TotalStation as an alternative to UNIX-based UIIS. After carryig out this study, the following conclusions were derived: PC-based UIIS costs less time and money than UNIX-based UIIS. The coordinates of the control point of the site were obtained using DGPS, then based on this point, locational data were obtained using RTK GPS and TotalStation in the site with realtime data capture to enhance the accuracy of locational data. And image data were also entered into database together with the text data. So, the multimedia database is possible in UIIS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.253-261
• /
• 1997

In general, the transformation of coordinates in GPS is carried out by 3 dimensional transformation method with 3-10 parameter. In korea, the coordinates of transformation points ware determined are adjusted in-dependently by planimetry and the height, and also the weight of observations were not properly applied to the adjustment. In this study, two different transformation methods are tested and analysed by the field test, and it is finally found that 2 dimensional method is more efficient way than 3 dimensional classical transformation method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.537-543
• /
• 2007

Since the GPS absolute positioning with pseudorange measurements can significantly be affected by the observation error, the time series analysis of the GPS receiver clock errors was performed in this study. From the estimated receiver clock errors, the time series model is generated, and constrained back in the absolute positioning process. One of the CORS (Continuously Operating Reference Stations) network is used to analyze the behavior of the receiver clock. The dominant part of the model is the linear trend during 24 hours, and the seasonal component is also estimated. After constraining the modeled receiver clock errors, the estimated position error compared to the published coordinates is improved from ${\pm}11.4\;m\;to\;{\pm}9.5\;m$ in 3D RMS.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.263-268
• /
• 2004

GPS/INS에 의한 항공사진측량을 이용하려면 사진촬영과 동시에 획득한 외부표정요소의 결과를 도화ㆍ편집 작업에 실제로 적용해 보아야 한다. 도화성과의 검증작업은 GPS/INS의 결과를 이용하여 수치지도의 제작시 가장 중요한 공정에 해당한다. 이를 위하여 기존 AT성과에 의하여 제작된 해석도화원도를 기준으로 본 연구에서 제시한 AT 성과별, 도화기별, 표정방식별로 수행한 도화결과를 비교하였다. AT 성과와 표정방법에 상관없이 해석도화와 수치도화의 평면과 표고의 오차를 비교하여 보면, 해석도화가 수치도화보다 우수한 결과를 보여주며, 또한 평면오차가 표고오차보다 더 크게 나타남을 알 수 있었다. GPS/INS AT의 Direct 표정의 경우 InDirect 표정방법에 비해 3배 이상의 오차가 발생하였으나 모든 경우의 결과가 허용오차를 충족하고 있으므로 축척 1:5000에서는 GPS/INS AT를 이용한 표정과 도화작업은 매우 효율적으로 수행될 수 있음을 알 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.3
• /
• pp.271-278
• /
• 2000

Recently, it has been partly attempted to measure behavior of large-sized bridge using GPS, but it is accomplished at the first step and unsystemically. The purpose of this research is to measure bridge behavior by Kinematic On The Fly (OTF) technique of GPS. The results of this study show that bridge behavior can be measured easily and conveniently in three dimension, monitored at the real time, and measured continuously without a break by OTF Technique of GPS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.5
• /
• pp.401-406
• /
• 2020

Continuously monitoring of Horizontal and Vertical movements in vulnerable areas due to earthquakes and volcanic activities is vital. These geohazard activities are the result of a slow deformation rate at the tectonic plate boundaries. The recent development of GPS (Global Positioning System) technology has made it possible to attain a millimeter level changes in the Earth's crust. This study used continuously observed GPS data at the flank of Ol Doinyo Lengai volcanic Mountain to determine crustal motion caused by impinging volcano from mantle convention. We analyzed 8 GPS observed from June 2016 to Dec 2019 using a well-documented Global Kalman Filter GAMIT/GLOBK software. The resulting velocity from GAMIT/GLOBK analysis was then used to compute the relative motion of our study area with respect to Nubia plate. Our analysis discovered a minor motion of less than 5mm/year in both horizontal and vertical components.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.21-25
• /
• 2002

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.31-34
• /
• 2002

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.79-82
• /
• 2002