• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.291-296
• /
• 2021

Recently, the dual-polarized antenna array has drawn attention due to the dependency of its signal processing gain on the signal polarization. Even though this polarization dependency makes it possible to mitigate a non-right-hand circularly polarized (non-RHCP) jamming signal from the same direction as a GPS signal, the dual-polarized antennas are not yet widely used for various applications. This study suggests a method that can acquire the polarization dependency of the signal-processing gain by intentionally misaligning antenna elements in a single-polarized antenna array. The simulation results show that the proposed method can successfully mitigate a non-RHCP jammer from the same direction as a GPS signal as if a dual-polarized antenna array does and provide comparable signal-to-jammer-plus-noise ratio (SJNR) performance with a completely aligned single-polarized antenna array and a dual-polarized antenna array.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.96-102
• /
• 2006

In this paper, the design, construction and basic characteristics of an electronically adaptive array antenna for the GPS receiver is described. The susceptibility of the GPS signals to the interference is of concern to the GPS user community. Because of the low received power of the GPS signals, outages can easily occur due to the unintentional interference and the easily obtainable low cost GPS jammer denying access to the GPS signals. We propose a technique of the adaptive array antenna that detects the GPS interference sources and controls the null beam pattern only toward the jamming sources to acquire GPS navigation data after acquisition and tracking of the GPS signals.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.382-389
• /
• 2013

In anti-jamming GPS receiver, adaptive signal processing techniques in which the radiation pattern of adaptive array antenna of elements may be adaptively changed used to reject interference, clutter, and jamming signals. In this paper, I describes adaptive signal processing technique using the sample matrix inversion(SMI) algorithm. This adaptive signal processing technique can be applied effectively to wideband/narrowband anti-jamming GPS receiver because it does not consider the satellite signal directions and GPS signal power level exists below the thermal noise. I also analyzed the effects of covariance matrix sample size and diagonal loading technique on the system performance of five-element circular array antenna. To attain near optimum performance, more samples required for calculation covariance matrix. Diagonal loading technique reduces the system nulling capability against low-power jamming signals, but this technique improves robustness of adaptive array antenna.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.46-51
• /
• 2015

In this paper, I design a linear array antenna simulator for anti-jamming GPS systems and perform various performance analysis by simulation. First, I generate simulated transmission signals through the analysis of GPS satellite signal structure, and analyze SNR(Signal to Noise power Ratio) performance of linear array antenna according to number of arrays under noise environments. In addition, I analyze the performance of the anti-jamming beam pattern using MMSE(Minimum Mean Square Error) signal processing method, and also analyze the anti-jamming performance considering antenna calibration problem when there are different delays between arrays.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.88-94
• /
• 2007

This paper deals with the performance analysis of 3-dimensional array antenna by DOA estimation and beamforming in GPS receiver for performance improvement by interference elimination. The array antenna in GPS receiver can improve the system performance by estimating DOA of arriving signal direction, making the main beam for desired direction and elimate the jammer signal by nulling while keeping the GPS signal direction by spatial filtering. In this paper, we propose five types of 3-dimensional array antenna and analyze the estimation error via MUSIC algorithm which is used for the estimation of DOA of arrived signal and beamforming performance. In analyzing DOA performance, we measure DOA estimation error, while in analyzing beamformig performance, we measure BER. In beamforming performance analyzing, we use various jammer power and the existence of GPS signal and angle spread. By performing through the computer simulation, Curved (B) 7-element antenna in proposed 3-dimensional array antenna exhibits the superior performance in the DOA estimation, estimation error, BER characteristic and angle spread compared to the rest four array antenna types.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.745-757
• /
• 2007

In this paper, we propose a design of GPS anti-jamming system and its operational method, which can effectively suppress interference and jamming signals induced in GPS receiver. The 7-array antenna used in the proposed system is composed of conventional 6 equi-spaced circular elements with one element on the center of antenna and can be efficiently operated under power-constrained conditions. Futhermore, in this paper, we analyze the structure and complexity of STAP and SFAP which are well known techniques in adaptive array antenna signal processing, and we compare the BER performances between STAP and SFAP in various jamming environment based on the same complexity.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.417-422
• /
• 2013

In this paper, the implementation of a null-steering antenna array using GPS patch antennas is suggested. The antenna array consists of five patch antenna elements fabricated on the ceramic substrate. The antenna element proposed here is a typical circular polarization patch and a prototype patch array antenna is manufactured on the PCB. The antenna has one reference element located at the center and other four elements are placed at the corners. A null in the direction of the jamming signal can be produced by changing the phases of 4-elements. Simulation results of the array antenna by CST MWS are presented and discussed. The basic performances are measured and the results are shown. The results show that the antenna presented here can be used to remove the signals from the directions of any jammers.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.48-55
• /
• 2006

This paper describes the antenna based GPS anti-jamming technology called CRPA(Controlled Reception Pattern Antenna), which used $2{\times}2$ array elements. In this system, the main functions are the antenna complex weight control and the GPS digital I/Q VM(Vector Modulator). To update the VM's I/Q complex weights, the PC based DAC(Digital to Analog Converter) module was also used and the two analog output voltages were applied to the $2{\times}2$ array elements to synthesize the null pattern. In the study, we also simulated the $2{\times}2$ GPS array null patterns to compare the null depth with experimental results. The VM was also modified at the frequency of 1.575GHz for the GPS L1 and controlled by the PC based VM software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.723-730
• /
• 2017

In this paper, we consider an online compensation algorithm considering the mutual coupling and suggest a new GPS antenna array to apply. To evaluate the anti-jamming performance for the proposed antenna array, ULA and URA, we divide direction finding of multiple jamming signals into environments. 1. there is no mutual coupling. 2. there is mutual coupling but no compensation. 3. mutual coupling is compensated. RMSE analysis showed that the online compensation algorithm works and that peak detection is possible for multiple jamming signals.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.295-301
• /
• 2018

Recently, GPS(Global Positioning System) array antenna technology is generally used and widely adopted as a national infrastructure structure and aero-vehicles for protection the GPS signal reception. Until now, the 2-dimensional planar array is universally used for its applications in the array antenna signal processing, however relatively higher altitude air vehicles such as UAV experiences additional null zones induced by low altitude GPS interferences which is located in a symmetry zone of antenna horizontal plane and this could make the receiving antenna pattern coverage reduction. In this paper, we improved 20% of the beam pattern receiving performance and 13 dB correlation value improvement by eliminating the interference mirror images.