• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.375-381
• /
• 2002

Depth of water information is obtained mainly from echo-sounding instrument which observes the round-trip time of signal from water surface to the bottom. Photogrammetry, underwater survey and laser survey etc. are also used as another method of bathymetric surveying. These methods are used specially for making track chart in a shallow water area. On the other hand, aircraft or satellite imagery ara also used in the sea area where the effect of suspended material is low and water quality is good. Presently, general bathymetric surveying has been performed in our country, but the spatial density of surveyed point are relatively low. Therefore, in this study we built a grid water depth chart which measured combing echosounder with GPS-RTK method and the depth accuracy was analyzed by using the data of direct survey water depth. As a results, the bathymatric mapping which use echosounder is more economical method compared to the existing methods.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.93-99
• /
• 2010

Since the facility management for various facilities in urban area are conducted by general managers who have poor knowledge for surveying technology, it is not easy to trace the exact location of the facility in a short time with the GIS map only by themselves in the field. In order to improve it, VRS-RTK or SBAS DGPS system integrated with UMPC and PDA which is uploaded GIS field software are being used recently however lot of difficulties are still existed with the GPS positioning in urban area due to the lack of visible satellites, no reception of correction data and multipath error by the interruption of the high buildings and houses etc. Therefore, in this study, we applied with Network DGPS system which allows better reception of satellite signal and correction data even in dense housing areas with the use of GNSS receiver and CDMA mobile phone. Based on the analysis of field data, it was confirmed that standard deviations of the Network DGPS positioning are 0.3 to 0.84m with a very high positioning rate even in dense housing areas. Therefore, it was concluded that the Network DGPS system could be used widely to fast and accurate positioning for various facilities management works in dense housing areas in the future.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.151-156
• /
• 2004

현재 전국에 산재해 있는 많은 소규모의 저수지들은 현재까지 관리 상태나 실지 내용적에 대한 정확한 자료가 모두 구비되어있지 못한 실정이다. 본 연구에서는 행정구역상 저수지가 많이 분포되어있는 영남권의 경주시 73개 소규모 저수지 가운데 23개소를 선정하여 실험을 하였다. RKT-GPS를 이용하여 5초마다 데이터를 취득하였고, E/S를 이용하여 1초 간격으로 수심에 대한 값과 TS를 이용하여 현황 측량을 실시하였다. 이렇게 취득된 자료를 가지고 3D 모델링을 하여본 결과 15개소(약 65%)의 저수지가 양호한 상태였음을 알 수 있었고, 과거자료와의 비교ㆍ분석을 통하여 현재 저수지 상태에 대한 정확한 내용적을 알 수 있었다. 또한 23개소 저수지의 만수면적과 유효저수량을 분석한 결과 만수면적은 20.63%, 유효저수량은 3.34 %만큼 줄어들었음을 알 수 있었다. 이를 통하여 현재 저수지 상태에 대한 분석과 관리 방향에 대한 방법에 대하여 기여하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.90-93
• /
• 2007

해양수산부에서 해양 DGPS기준국과 연계하여 전국망 위성항법보정시스템 (NDGPS) 구축 사업을 추진 중에 있으며, 2008년도 춘천기준국이 설치 완료되면 우리나라 전역에서 실시간 DGPS 측위 정보를 이용할 수 있게 되었다. 따라서 DGPS 이용 활성화를 위하여 무엇보다도 DGPS 측위 정확도의 신뢰성이 요구되는바, 실시간 DGPS 의 측위 정확도를 측정 ${\cdot}$ 분석하여 신뢰성을 검증하였다. 실시간 NDGPS 측위 정확도는 Static 측정에 있어 0.42m(RMS), 회전운동에 의한 Dynamic 측정시 0.48m(RMS)로 분석되었으며, RTK에 의한 비교 측정 ${\cdot}$ 분석도 병행하였다. 따라서 위성항법보정시스템 (DGPS)은 높은 정확도를 요구하는 GIS구축사업 분야에 직접적으로 이용될 수 없으나 실시간 측위 정보를 필요로 하는 GIS활용 분야에서 DGPS가 다양하게 이용될 수 있을 것이다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2013

As GNSS(Global Navigation Satellite System) is used in various filed, many countries establish GNSS system independently. But GNSS system has the limitation of accuracy and stability in stand-alone mode, because this system has error elements which are ionospheric delay, tropospheric delay, orbit ephemeris error, satellite clock error, and etc. For overcome of accuracy limitation, the DGPS(Differential GPS) and RTK(Real-Time Kinematic) systems are proposed. These systems perform relative positioning using the reference and user receivers. ETRI(Electronics and Telecommunications Research Institute) is developing precision navigation system in point of extension of GNSS usage. The precision navigation system is for providing the precision navigation solution to common users. If this technology is developed, GNSS system can be used in the fields which require precision positioning and control. In this paper, we introduce the precision navigation system and perform design and algorithm verification.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.521-531
• /
• 2020

QZSS (Quasi-Zenith Satellite System) provides the CLAS (Centimeter Level Augmentation Service) through the satellite's L6 band. CLAS provides correction messages called C-SSR (Compact - State Space Representation) for GPS (Global Positioning System), Galileo and QZSS. In this study, CLAS messages were received by using the AsteRx4 of Septentrio which is a GPS receiver capable of receiving L6 bands, and the messages were decoded to acquire C-SSR. In addition, Multi-GNSS (Global Navigation Satellite System) Code-PPP (Precise Point Positioning) was developed to compensate for GNSS errors by using C-SSR to pseudo-range measurements of GPS, Galileo and QZSS. And non-linear least squares estimation was used to estimate the three-dimensional position of the receiver and the receiver time errors of the GNSS constellations. To evaluate the accuracy of the algorithms developed, static positioning was performed on TSK2 (Tsukuba), one of the IGS (International GNSS Service) sites, and kinematic positioning was performed while driving around the Ina River in Kawanishi. As a result, for the static positioning, the mean RMSE (Root Mean Square Error) for all data sets was 0.35 m in the horizontal direction ad 0.57 m in the vertical direction. And for the kinematic positioning, the accuracy was approximately 0.82 m in horizontal direction and 3.56 m in vertical direction compared o the RTK-FIX values of VRS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.19-30
• /
• 2012

Recently, vision-based dynamic deflection measurement techniques have significant interests and are getting more popular owing to development of the high-quality and low-price camcorder and also image processing algorithm. However, there are still several research issues to be improved including the self-vibration of vision device, i.e. camcorder, and the image processing algorithm in device aspect, and also the application area should be extended to measure three dimensional movement of floating structures in application aspect. In this study, vision-based dynamic motion measurement technique using multiple targets is proposed to measure three dimensional dynamic motion of floating structures. And also a new scheme to select threshold value to discriminate the background from the raw image containing targets. The proposed method is applied to measure the dynamic motion of large concrete floating quay in open sea area under several wave conditions, and the results are compared with the measurement results from conventional RTK-GPS(Real Time Kinematics-Global Positioning System) and MRU(Motion Reference Unit).

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.19-31
• /
• 2013

It is well known that the accident of vehicles carrying hazardous materials incurs huge losses economically and socially. To detect and respond rapidly against the accident of a vehicle carrying hazardous materials, it is essential to estimate the relative navigation information between the forward tractor module and the backward trailer module of the vehicle reliably and accurately. In this paper, a precise relative positioning system based on GPS is designed, implemented, and evaluated as a prerequisite to design an effective relative navigation system for the vehicle carrying hazardous materials. An experiment using field-collected 10 Hz real GPS measurements showed that the designed relative positioning system achieves 22 cm accuracy within 15 epochs by float solutions. Also, it was found that cm-level integer solutions can be generated reliably after the quick convergence of float solutions.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.61-64
• /
• 2004

현재 GPS를 이용한 위성측위시스템은 기존의 DGPS에 의한 정밀도 향상 차원을 넘어 상시관측소를 활용한 기준국의 활용 증대 및 다양한 동시 사용자의 욕구를 충족시키기 위해 여러 가지 연구들이 진행되고 있다 현재 국내 연구동향으로 VRS-RTK (Virtual Reference Station Real Time Kinematic)에 대한 기초 연구가 진행 중에 있으며 해양수산부의 전파를 이용한 비콘 방식과 표준과학연구원 천문대에서는 MBC와 연계한 FM-DARC(Data Radio Channel)방식 등이 활용 방안으로 준비중에 있으며, 여러 기관과 대학 연구 기관에서 기초 연구가 진행 중에 있다. 따라서 이미 독일, 싱가폴, 일본 등에서 활용하고 있는 VRS의 연구를 보다 심화하여 현재 각기 다른 기관에서 보유하고 있는 70여개의 GPS 상시관측소의 효율적인 활용과 대 국민 서비스를 제공할 수 있는 시스템이 절실히 필요한 시기이다. 따라서 본 논문에서는 이런 가상관측의 결과를 산출할 수 있는 통계학적 모델링을 통한 가상관측 보정값을 산출할 수 있는 보정값을 제시할 수 있는 알고리즘 개발에 그 목적이 있다. 향후 알고리즘 개발이 완료되면 통계학적 모델링을 통해 단일 기준점에 의한 GPS 측량에서 불가능한 위치 결정 네트웍의 가상 관측을 가능하게 할 것이며, 신뢰성 있는 미지정수 해를 만들 수 있을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5215-5220
• /
• 2013

Recent construction in the field of 3D aversion is increasing interest in automation. This study is results about survey of the coastal landfill using automatic VRS-GPS surveying system. GPS is made with GRXI and SHC250 controller. Automatic surveying system is composed of DPS module, geomagnetism sensor, bluetooth, gimbals, IMU, etc and enables an automatic driving via entered into a route of position. The developed auto surveying system has installed the front and camera for vertical axis and can grasp situation of surveying with smartphone in real time. The comparative result between surveyed result with repetition method auto VRS-GPS surveying system observed surveyed result with VRS-RTK has shown that average error of x-axis is 0.009m, average error of y-axis, 0.010m and average error of height, 0.002m. This possibility was confirmed that field application.