• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.384-391
• /
• 2009

The coastline area, which was the important to decide the shape of the national land, has the characteristics of changing its shapes and features. We have some trouble to make the appropriate use-plan, because of the huge land to be reclaimed from the sea and developing large and small coast areas. Of them the coastal sand dune plays a definite primary role in the side of tourism and ecology. But there is not enough study for that. Busan Songdo coast is decided as an object of this study. We would analyze transfer path of the coastal sand dune through the time series analysis with RTK-GPS survey for many years. In case of Song do coast, the mean coastline length is approximately 620m, the area is approximately $31,846m^2$. Breakwaters are set up in right and left sides in Song do coast. it can make the sand dune be a minimum. So the coastal sand dune is steadily deposited with a certain beach nourishment of every year. As a result of 7 times survey, both sides of the coastal sand dune are eroded. It turns out it is going ahead over all as the center of the coastal sand dune is deposited.

• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.28-34
• /
• 2015

Purpose: This study aimed to install an RTK-GPS (Real Time Kinematic-Global Positioning System) and IMU (Inertial Measurement Unit) on a tractor used in a farm to measure positions, pasture topography, posture angles, and vibration accelerations, translate the information into maps using the GIS, analyze the characteristics of grass harvesting work, and establish new technologies and construction standards for pasture infrastructure improvement based on the analyzed data. Method: Tractor's roll, pitch, and yaw angles and vibration accelerations along the three axes during grass harvesting were measured and a GIS map prepared from the data. A VRS/RTK-GPS (MS750, Trimble, USA) tractor position measuring system and an IMU (JCS-7401A, JAE, JAPAN) tractor vibration acceleration measuring systems were mounted on top of a tractor and below the operator's seat to obtain acceleration in the direction of progression, transverse acceleration, and vertical acceleration at 10Hz. In addition, information on regions with bad workability was obtained from an operator performing grass harvesting and compared with information on changes in tractor posture angles and vibration acceleration. Results: Roll and pitch angles based on the y-axis, the direction of forward movements of tractor coordinate systems, changed by at least $9-13^{\circ}$ and $8-11^{\circ}$ respectively, leading to changes in working postures in the central and northern parts of the pasture that were designated as regions with bad workability during grass harvesting. These changes were larger than those in other regions. The synthesized vectors of the vibration accelerations along the y-axis, the x-axis (transverse direction), and the z-axis (vertical direction) were higher in the central and northwestern parts of the pasture at 3.0-4.5 m/s2 compared with other regions. Conclusions: The GIS map developed using information on posture angles and vibration accelerations by position in the pasture is considered sufficiently utilizable as data for selection of construction locations for pasture infrastructure improvement.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.47-52
• /
• 2006

In recent years, there is a strong urge to introduce GPS systems which can role in reference points and measure global positions to the field of structural measurements. In this study, a new structural measurement system using low-cost L1 single frequency GPS receivers instead of conventional expensive RTK L1&L2 dual frequency GPS receiver. This system consists of GPS OEM board, GPS antenna, wireless access points, and monitoring program based on Lambda method and makes it possible to apply to monitor a static behavior of large scaled Infra-structures, such as dams, tall buildings, road slops.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.884-886
• /
• 2022

본 논문에서는 GPS 기반의 자율주행 군사로봇에 사용된 각종 센서들의 융합(Sensor Fusion)에 대하여 다루고 있다. GPS 를 통한 자율주행의 경우 GPS 의 성능에 따라 정확도 차이는 있으나 특별한 지형지물 없이 로봇의 현재 위치를 파악할 수 있다는 장점이 있다. 하지만 GPS 만 이용하여 자율주행 알고리즘을 구성하는 경우 로봇의 진행 방향을 특정하지 못한다는 문제점이 발생한다. 이를 해결하기 위하여 본 논문에서는 RTK GPS 와 Lidar, IMU 센서를 ROS 환경에서 Robot_Localization 과 EKF(Extended Kalman Filter)를 이용하여 융합하는 방법에 대하여 다루었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.135-142
• /
• 2013

Recently, it is a pretty well known way to compute GPS/INS using Continuously Operating Reference Station (CORS) and Network-based RTK for obtaining Exterior Orientation (EO) parameters of aerial photogrammetry. In this study, it is way to compute Exterior Orientation (EO) parameters using ground base stations, using Continuously Operating Reference Station (CORS) broadcast orbits and International GNSS Service (IGS) rapid orbits. And the residuals of Exterior Orientation (EO) parameters were computed based on the results of ground base station. As a result, the case of using SmartBase to obtain Exterior Orientation (EO) parameters was showed the high accuracy of X, Y, K more than using Continuously Operating Reference Station (CORS) of National Geographic Information Institute (NGII). Also, distance and direction of Continuously Operating Reference Station (CORS) of National Geographic Information Institute (NGII) from ground base station affected Exterior Orientation (EO) parameters. And different forms of residuals were shown according to the aerial photo courses.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.127-133
• /
• 2014

The purpose of this study is to evaluate the accuracy of Network-RTK(VRS) survey for applying to Ground Control Points(GCPs) survey required for mapping aerial photographs. Network-RTK has been serviced by National Geographic Information Institute since 2007. On the basis of the global coordinates system(ITRF2000), the coordinates of GCPs determined by Static GNSS survey with relative positioning techniques were regarded as accurate values. The coordinates of GCPs were also determined by Network-RTK survey using two kinds of receivers, and then they were converted into the global coordinates system(ITRF2000) by applying suitable geoid model and coordinate transformation. These coordinates of GCPs were compared with those from Static GNSS survey. The root mean squares error (RMSE) of coordinate differences between Network-RTK and Static GNSS was ${\pm}2.0cm$ in plane and ${\pm}7.0cm$ in height. Therefore, Network-RTK survey that enables single GNSS receiver to measure positions in short time is a practical alternative in positioning GCPs to either RTK survey that uses more than two sets of GNSS receivers or Static GNSS survey that requires longer observation time.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.1
• /
• pp.17-26
• /
• 2017

Latency occurs in RTK, where the measured position actually outputs past position when compared to the measured time. This latency has an adverse effect on the navigation accuracy. In the present study, a system that estimates the latency of RTK and compensates the position error induced by the latency was implemented. To estimate the latency, the speed obtained from an odometer and the speed calculated from the position change of RTK were used. The latency was estimated with a modified correlator where the speed from odometer is shifted by a sample until to find best fit with speed from RTK. To compensate the position error induced by the latency, the current position was calculated from the speed and heading of RTK. To evaluate the performance of the implemented method, the data obtained from an actual vehicle was applied to the implemented system. The results of the experiment showed that the latency could be estimated with an error of less than 12 ms. The minimum data acquisition time for the stable estimation of the latency was up to 55 seconds. In addition, when the position was compensated based on the estimated latency, the position error decreased by at least 53.6% compared with that before the compensation.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.90-94
• /
• 2007

The conventional single-reference station positioning is affected by systematic errors such as ionospheric and tropospheric delay, so that the rover must be located within 10 km from the reference station in order to acquire centimeter-level accuracy. The medium-range real-time kinematic has been proven feasible and can be used for high precision applications. However, the longer of the baseline, the more of the time for resolving the integral ambiguity is required. This is due to the fact that systematic errors can not be eliminated effectively by double-differencing. Recently, network approaches have been proposed to overcome the limitation of the single-reference station positioning. The real-time systematic error modeling can be achieved with the use of GPS network. For expanding the effective range and decreasing the density of the reference stations, Land Survey Bureau, Ministry of the Interior in Taiwan set up a national GPS network. In order to obtain the high precision positioning and provide the multi-goals services, a GPS network including 66 stations already been constructed in Taiwan. The users can download the corrections from the data center via the wireless internet and obtain the centimeter-level accuracy positioning. The service is very useful for surveyors and the high precision coordinates can be obtained real time.