• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.432-432
• /
• 2023

한국건설기술연구원(Korea Institute of Civil Engineering and Building Technology, KICT)의 안동하천연구센터(Andong River Experiment Center, REC)는 다양한 하천 관련 실규모 실험을 수행하기 위해 3개의 수로를 보유하고 있다. 본 연구의 주목적인 실증 실험 계측 결과를 기반으로 3D 게임엔진을 이용하여 물 흐름을 재현하기 위해 A1 수로를 대상구간으로 설정하였다. 실증 실험의 경우 2개의 수문 개도율 조건에서 ADV와 ADCP를 활용하여 계측된 유량 및 유속 결과들을 비교하였으며, 추가적으로 영상 데이터로 부터 표면유속(LS-PIV)을 산정하였다. 3D 게임 엔진은 렌더링 엔진, 물리 엔진, 오디오 엔진, UI 시스템, 게임플레이 프레임워크 등이 잘 융합된 소스코드들과 개발자들이 이용하기 쉬운 방식으로 변환된 툴(tool)로 제공하여 현실 세계를 가상 세계에 시각화하여 구현하는데 큰 장점을 가지고 있다. 또한 기존의 흐름 재현이 가능한 수리/수문 모델링의 경우 특정한 목적으로만 이용가능하고 연산에 소용되는 시간 때문에 실시간 흐름재현이 어렵지만, 3D 게임엔진을 이용하는 경우 다양한 목적과 여러 분야와의 고려가 동시에 가능하며 연산의 단순화를 통해 실시간 흐름 재현이 가능하다는 장점이 있다. 본 연구에서는 언리얼 엔진의 Niagara Fluids와 Fluid flux 툴들을 활용하여 하천실증실험 시설 일부 구간에 대해 물 흐름을 재현하였다. 먼저 하천실험실증시설을 드론과 RTK-GPS를 이용하여 촬영된 결과를 정합하여 3D 게임엔진 기반 흐름 재현을 위한 지형 기초 자료를 구축하였다. 지형 계측 결과를 기반으로 A1 수로 전체 구간을 대상구간으로 설정한 이후 수문 조절을 통해 흐름 조건을 제어할 수 있도록 제작하였으며, 실제 흐름에 대한 계측 결과를 기반으로 재현된 흐름을 대상으로 material 값의 조정(방향 X, Y값을 RGB값으로 변환한 뒤 벡터 길이 값으로 환산)을 통해 0~100 사이 값을 이용하여 유속을 표현하였다. 최근 가상공간 (i.e. 디지털트윈) 관련 시장 성장이 매우 빠르고 다양한 사업에서 해당 기술의 수요가 증가하고 있으며, 본 연구를 통해 물 흐름의 디지털 트윈화를 위한 수단으로서 3D 게임 엔진의 활용 가능성을 확인하였다. 다만 실제 하천의 적용과 하천관리를 위한 실용화를 위해서는 추가적인 연구와 분석이 이루어져야 할 것이다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.31-37
• /
• 1999

In this paper, authors introduce about wide vessel traffic service(VTS) system using automatic identification system(AIS). In order to develop the prototype of wide VTS system, Koreasat is used for AIS. In this system, ship position obtained by using GPS is reported automatically to VTS center through Koreasat. By using this system, VTS center can cover more wide area than the case using radar only. And the uncertainty of information decreases. The results of test show the good possibility of VTS using satellite and AIS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.702-709
• /
• 2008

In this paper, Developed u-Marketing system prototype based on location base service could offer because this treatise combines personalized and mobility. It is u-Marketing system takes advantage of u-LBS base skill to support marketing that is old Mobile more efficiently u-marketing call center. If it was marketing in spam way that marketing to be Mobile passes public information contents one-sidely to unspecificness many customers so far, u-Marketing system takes advantage of u-LBS base skill-marketing system is u-marketing system of location base that can take advantage of subscriber's location information through portable phone or GPS with transfer telegraph operator adulterating member's distinction of sex, age, residential district, profession and support satisfied article ordered style Target marketing.

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.105-127
• /
• 1989

Although poultry industry in Japan has been much developed in recent years, it still needs to be developed , compared with developed countries. Since the poultry market in Korea is expected to be opened in the near future it is necessary to maximize the Productivity to reduce the production costs and to develop the scientific, technologies and management organization systems for the improvement of the quality in poultry production. Followings ale the summary of poultry industry in Japan. 1. Poultry industry in Japan is almost specized and commercialized and its management system is ： integrated, cooperative and developed to industrialized intensive style. Therefore, they have competitive power in the international poultry markets. 2. Average egg weight is 48-50g per day (Max. 54g) and feed requirement is 2. 1-2. 3. 3. The management organization system is specialized and farmers in small scale form complex and farmers in large scale are integrated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1021-1023
• /
• 2013

Currently, aircraft and automobile simulator for training provides a variety of training by making hypothetical situation on a simulator Installed on the ground Currently. And the instructor maximizes the effectiveness of the training by Monitoring training and instructing the required training. When trainees are boarding the aircraft or automobile. The Instructor in the ground is not able to monitoring aircraft, automobile. The assessment of the training is not easy after the end of the training Therefore, it is difficult to provide high quality of education to the students. In this paper, Simulation software is to develop the following. Collecting GPS and real-time information for aircraft, automobile ${\grave{a}}implementing$ 3D simulation. Implementing Current image of the aircraft or automobile in the screen by 3D Real-time monitoring of training situation at the control center utilizing for training saving 3D video files Analysis, evaluation on training After the end of the training.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.21-28
• /
• 2010

The classical RTK System requires that GPS data is transmitted from a single reference receiver to one or more roving units. But its error increase due to distance between reference and rover. VRS(Virtual Reference Station) system, a network of reference stations can be used to isolate the components of these systematic errors and use the resultant corrections to create Virtual Reference Stations at any location within the network. Use of a VRS significantly reduces the effects of systematic errors and improved accuracy. In this study, Network-RTK survey using VRS serviced by NGII(National Geographic Information Institute) was performed and the results were compared with results of total station surveying and notified coordinates of cadastral control points for utilization assessment of VRS.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.221-226
• /
• 2005

This paper provides a method to implement IT system for supply chain management problem The fundamental scheduling issues that arise in the pickup delivery system are optimizing the system with the minimum cost, the maximum throughput and the service level. This study is concerned with the development of the customer responsive pickup-delivery system based on e-logistics and demand chain management. Through this study, the pickup-delivery problem of the vehicle using the GIS PDP and GUI- type computer programs are formulated. The computational results show that the proposed method is very effective on a set of test problems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2007

3D data are in great demand for pedestrian navigation recently. For pedestrian navigation, we needs to reconstruct 3D model in detail from people's eye. In order to present spatial features in detail for pedestrian navigation, it is indispensable to develop 3D model not only in outdoor environment but also in indoor environment such as underground shopping complex. However, it is very difficult to acquire 3D data efficiently by mobile mapping without GPS. In this research, 3D shape was acquired by Laser scanner, and texture by CCD(Charge Coupled Device) sensor. Continuous changes position and attitude of sensors were measured by IMU(Inertial Measurement Unit). Moreover, IMU was corrected by relative orientation of CCD images without GPS(Global Positioning System). In conclusion, Reliable, quick, and handy method for acquiring 3D data for indoor environment is proposed by a combination of a digital camera and a laser scanner with IMU.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.117-128
• /
• 2013

u-safety service system inter-works with the diverse operation agencies, through CCTV network, such as the emergency call terminal with built-in GPS, the mobile communication network, u-safety service provider, relay system and CCTV control center. In the case of the emergency call, this service searches the location of caller in real time, and then continues to search the location of caller through the control of CCTV in the searched place, and can provide the several agencies like guardian, police office, fire station, hospitals, relief organizations and municipalities, with the diverse information necessary for the secure rescue through SMS and wired network. In this paper, a new protocol and specification for u-safety service relay system is designed and implemented. The effectiveness of presented protocol is verified by computer simulation. The designed protocol of u-safety service is applied to real 3GPP and 3GPP2 mobile communication networks to verify its performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.891-893
• /
• 2012

Currently, aircraft and automobile simulator for training provides a variety of training by making hypothetical situation on a simulator Installed on the ground Currently. And the instructor maximizes the effectiveness of the training by Monitoring training and instructing the required training. When trainees are boarding the aircraft or automobile. The Instructor in the ground is not able to monitoring aircraft, automobile. The assessment of the training is not easy after the end of the training Therefore, it is difficult to provide high quality of education to the students. In this paper, Simulation software is to develop the following. Collecting GPS and real-time information for aircraft, automobile ${\grave{a}}implementing$ 3D simulation. Implementing Current image of the aircraft or automobile in the screen by 3D Real-time monitoring of training situation at the control center utilizing for training saving 3D video files Analysis, evaluation on training After the end of the training.