• PNF and Movement
• /
• 제6권1호
• /
• pp.33-40
• /
• 2008

Purpose : When the pliability of the Lumbar is degraded, the kinesiology function undergoes an influence and it receives an overload. Finally, it is connected with a Lumbar muscular injury. When it does the regular exercise treatment the lumbago patient the balance and function of changeover are improved. The purpose of this study is to review of effect of the PNF application for lumbago patient Methods : By using internet, we research the PubMed, Science Direct, KISS, DBpia and the article on the effect of PNF. We selected the article between 1970 and 2007. Key words were low back pain, lumbago, PNF. Results : PNF is a therapeutic exercise for central nervous system(CNS) patient and the peripheral nervous system(PNS) patient and it is widely applied from sports medicine in the last. According to research of the Jung Young Jo(2007) and Han Kou Soo(2002), PNF technique improves the pain and a condition of the lumbago patient. And the affection balanced change and dynamic balance change and spontaneous movable scope are improved. And it improved to daily life activity. According to research of Moore and Hutton(1980), Lee Kyoung Hye(1999), PNF stretching where it is one of muscular relaxation is good in lumbar muscle fascia ache solutions, and PNF stretching that muscle is relaxed and increases ROM by Reflective system of the vertebra. These researches is relation all each other. it have appeared many report of research about Pliability, muscular power, balance, mobility improve ADL movement of attendance ability and functional action improved excise therapy put effect about lumbago patient recently, it have appeared research about therapy of lumbago patient through PNF. But PNF technique is not application about lumbago patient in clinic, therefore also it is not enough for case study about this therapy. Conclusion : PNF improve combination operation of muscle, inconvenience decrease from daily life activity, ROM(range of movement) of lumbar is increase and Lumbago reduce. So we suggest that PNF will be applies on the lumbago patient and must do a many research.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.248-255
• /
• 2015

Purpose : The purpose of this research is to develop the optimized method and process in the reliability-growth target setting, especially for complex and repairable system (or products) such as vehicle and airplane, construction equipment. Method : A reliability-growth test plan specifies a scenario to achieve the planned reliability value (or reliability target). The major elements in test planning are reliability-growth starting time and reliability level at that time, reliability-growth rate and reliability-growth target. All of them except a reliability target can be referred to the previous development data and reference researches. The reliability target level is directly influencing to test period (or time) which is related to test and warranty cost together. There are a few researches about the reliability target setting method and but showing the limitations to consider the views of engineering, business and customer together. There is no research how to handle the target setting process in detail. Result : We develop the optimized method and systematic process in reliability target setting with considering such views. This research also establish the new concept as production capability which means company (or supplier) capability to product its products. Conclusion : In this research result, we apply the new method to a few projects and can set the reasonable test planning. The developing results is showing the good balance between the developing cost and warranty cost at market.

• 한국의류산업학회지
• /
• 제16권5호
• /
• pp.766-775
• /
• 2014

This study is aimed to research the actual wearing condition of ballet dancewear of girls aged between 2 and 6 years on its design, size and fit. Survey data were collected from 171 mothers who have a girl learning ballet dance. The questionnaire was composed with ballet education, ballet dancewear purchasing, preference on design, size selection, and fitting. The collected data were analyzed with frequencies statistics, ${\chi}^2$-test, ANOVA using the SPSS WIN 20.0. The results are as follows; High rate of respondents said that the purpose of ballet education was for good body balance, leisure activity, and height growth. The main method of purchase was online shopping. The design, price, size and fit were identified as important ballet dancewear attributes for girls. The most preferred style of ballet dancewear were 'short sleeve skirted leotard' and 'camisole skirted leotard' which look like dress. The respondents reported slight satisfaction with size and fit, price, convenience in action, sewing and durability. The most preferred sizing system was code by height but any ballet dancewear makers don't use code by height. Therefore it is difficult for consumers to select size. Retailers and manufacturers could potentially use the results of this study to improve the sizing system and fit for children's ballet dancewear.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2048-2050
• /
• 1998

An uninterruptible power supply(UPS) with parallel operation is used to increase the power capacity of the system or to secure higher reliability at critical loads. In the parallel operating system composed of the multiple UPSs, load-sharing, i.e. current balance control between them is key technique. Because of its low impedance and quick response characteristics, inverter output current changes very rapidly and thereby easily researches an overload condition. The difference between total load current divided by number of operating inverters and its own current is detected as unbalanced current. Then frequency and voltage are controlled to minimize the active component and the reactive component. A good performance of the proposed load-sharing technique is verified by experiments in the parallel operating system with two 40kVA UPSs.

• Safety and Health at Work
• /
• 제12권2호
• /
• pp.154-166
• /
• 2021

Background: Occupational health and safety (OHS) is a significant interest of all governments to prevent workplace hazards. Although appropriate legislation and regulations are essentials for the protection of workers, they are solely not enough. Application of them in practice should be secured by an efficient inspection system. Fundamental components of an inspection system are inspectors and their audit tasks. Maintaining the fair balanced task assignment among inspectors strictly enhances the efficiency of the overall system. Methods: This study proposes a two-phased goal programming approach for OHS inspectors' task assignments and presents a case study. Results: The solution approach gives the balanced assignment of inspectors to the workplaces in different cities of the country in the planning period. The obtained schedule takes into account the distances covered by the work places and the number of the workplaces' employees to be audited and pays attention to the human factors by considering the preferences of the inspectors. The comparisons between the obtained optimal schedule and the implemented one that is produced manually show that the approach not only maintains the technical requirements of the problem, but also provides social and physical balance to the task assignment. Conclusion: Both the approach and the application study are expected to offer fruitful inspirations in the area of safety management and policy and they provide a good guide for social policy and organizational aspects in the field of OHS inspectors' task assignment.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.17-25
• /
• 1998

Aluminum alloys have low density, relatively high strength and yield strength, good plasticity, good machinability, and high corrosion and acid resistance. Therefore, they are suitable for large containers for the food, chemical and other industries. Large containers are often bodies of revolution consisting of shell courses, stiffening rings, heads and other elements joined by annular welds. Larger containers have longer welds and require greater leak-tightness and higher weld mechanical properties. The LNG tank consists of aluminum plates with various sizes, so its construction should by divided by several sections. Moreover, each section has its own sub-section consisted of several aluminum plates. To guarantee the quality of huge LNG tank, therefore, the precise control of plate dimension should by urgently needed in conjunction with the appropriate selection of process parameters such as cutting speed, depth of cut, rotational speed and so on. In this paper, a manufacturing system was developed to implement automatic circular tracking in height direction and automatic circular interpolation in depth of cut direction. Also, the neural network based on the backpropagation algorithm was used to predict the cutting quality and motor load related with the life time of the developed system. It was revealed that the manufacturing system and the neural network could be effectively applied to the bevelling process and to predict the quality of machined area and the motor load.

• 한국유체기계학회 논문집
• /
• 제2권2호
• /
• pp.19-26
• /
• 1999

Thermal output in a nuclear power plant is verified with calorimetric heat balance on the secondary plant. The calorimetry involves the precise measurement of the feedwater flow rate. However, the correct indication of feedwater flow rate obtained by a pressure-difference measurement across a venturi can be affected by instrument errors, fouling or a poorly developed velocity profile. This can result in an inaccurate mass flow rate and consequently an inaccurate estimate of power. The purpose of this study is to develop verification methods with accuracy better than $0.5\%$ for high precision flow measurement to be used for measuring feedwater flow rate. This chemical tracer method is a testing process that uses tracers which can be applied to quantify losses in electrical output due to the incorrect measurements of feedwater flow rate. And this system has good response to the variation of the flow rate. Accuracy of better than 0.5 percent can be expected for feedwater flow measurement, providing that the system can be stabilized during the test. This methodology is applicable to other flow systems well.

• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.476-482
• /
• 2006

본 연구에서는 유기산염으로부터 유기산으로의 변환을 2실 배열 공정의 바이폴라막 전기투석을 이용하여 행하였다. 유기산으로 아세트산과 젖산을 사용하였으며, 유기산의 농도, 가성소다의 농도 그리고 pH 값들을 전류밀도에 따라 측정하였다. 그 결과 유기산염은 효과적으로 유기산으로 전환되었을 뿐만 아니라, 잔여 $Na^+$ 이온을 수산화나트륨의 형태로 회수할 수 있었다. 실험 결과를 바탕으로 이온 평형을 고려하여 수학적인 모델을 확립하였다. 시간에 따른 유기산의 농도, 가성소다의 농도 그리고 pH 값의 모델식은 실험 데이터와 잘 일치하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1694-1700
• /
• 2007

In the electrified section, both of return current and signal current are flowing in the same rail in common. But signal current shall be allowed to flow in the specific track circuit and not in the other circuit while the traction return current shall come back to power sub-station. This paper presents measuring system that use both sensor and antenna. The aim of the system is to achieve the difference in current between the two rails and the presence of trimming capacitors. In order to improve the transmission level, trimming capacitors are connected between the two rails at constant spacing. To maintain the balance of traction return current, rails of both sides may be jointed by the so-called SVPMM. The traction return current is sometimes unbalanced owing to the ill-contact of SVPMM. In this paper, we propose a diagnosis method based on a short-circuited current(Icc), trimming capacitors and traction return current measured by Korail inspection vehicles. Whether Icc is good or bad depends not only on the presence of trimming capacitors but also on the unbalance of the traction return current.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권1호
• /
• pp.1-13
• /
• 2000

A numerical study for performance analysis of a crossflow-type forced draft cooling tower has been performed based on the finite volume method with non-orthogonal body fitted, and non-staggered grid system. For solving the coupling problem between water and air, air enthalpy, moisture fraction, water enthalpy, and water mass balance equations are solved with Navier-Stoke's equations simultaneously. For the effect of turbulence, the standard k-$\varepsilon$ turbulent model is implied in this analysis. The predicted result of the present analysis is compared with the experimental data and the commercial software result to validate the present study. The predicted results show good agreement with the experimental data and the commercial software result. To investigate the influence of the cooling tower design parameters such as approach, range and wet bulb temperature, parametric studies are also performed.