• 제목/요약/키워드: GO-FLOW

검색결과 351건 처리시간 0.029초

댐 건설이 하류하천 하상에 미치는 영향 분석 (Influence Analysis for Natural River Bed with Dam Construction)

  • 추태호;채수권
    • 한국습지학회지
    • /
    • 제14권4호
    • /
    • pp.715-723
    • /
    • 2012
  • 낙동강의 지류인 내성천의 회룡포는 섬 안의 섬으로 불리는 모래 백사장을 가지고 있는 매우 잘 알려진 관광명소이다. 그러나 상류 지역 댐의 건설이 계획되었다. 따라서 상류로 부터의 유사 유입이 차단되게 되었다. 이러한 상황에서 내성천의 지류로부터 유입되는 유사량 등을 통하여 회룡포의 모래 백사장에 미치는 영향을 1차원 및 2차원 모형을 사용하여 분석하였다. 유량-유사량은 댐의 유지유량과 지류에서 들어오는 유사량의 유역면적비에 의해서 산정된 값을 입력 자료로 활용 하였다. 1차원 모형은 HEC-6 모형을 사용하였고 2차원 모형은 SMS의 SED2D 모형을 사용하여 분석하였다. HEC-6 모형은 10년 전 하상에 데이터를 넣어 현재 하상과 가장 일치하는 공식인 Yang공식을 선정하여 현재 하상으로부터 20년 후를 모의하였다. SED-2D 모형은 현재 하상을 기준으로 20년 후를 모의하였고 두 모형 분석 결과 회룡포 구간에서는 동일한 양상이 나타나는 것으로 확인되었다.

허혈성심장(虛血性心臟) 및 심장세포(心臟細胞)에 대(對)한 가미건심탕(加味健心湯)의 실험적(實驗的) 연구(硏究) (The Effects of Gamigunshimtang on the Ischemic Heart Disease & Heart cell in Rats)

  • 박정미;문상관;고창남;조기호;김영석;배형섭;이경섭
    • 대한한의학회지
    • /
    • 제19권1호
    • /
    • pp.251-270
    • /
    • 1998
  • The effects of Gamigunshimtang on the isolated perfused ischemic heart in rats, heart rates, left ventricular pressure, cardiac blood flow and cardiotoxicity were stu.died in H9C2 myoblast cell, myocardial slice culture The results were as follows: 1. The administration of Gamigunshimtang to the rat recovered effectively heart rate, left ventricular pressure and flow rate from the experimental ischemia in perfused rat heart. The release of lactic dehydrogenase after the ischemia also decreased compared to the control group. 2. The administration of Gamigunshimtang to H9C2 myoblast culture enhanced the cell proliferation and protected against doxorubicin and allylamine induced release of the lactic dehydrogenase into the culture medium. It also protected effectively against doxorubicin and allylamine induced decrease of Ca ATPase activity and the increase of NADPH-cytochrome C reductase activity in the microsome. 3. The administration of Gamigunshimtang to the rat myocardial slice culture protected effectively against doxorubicin and allylamine induced decreases of protein synthesis and ATP content, and increases of cvtosolic enzyme, creatin kinase into the medium and lipid peroxidation.

  • PDF

Kalman Filtering-based Traffic Prediction for Software Defined Intra-data Center Networks

  • Mbous, Jacques;Jiang, Tao;Tang, Ming;Fu, Songnian;Liu, Deming
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권6호
    • /
    • pp.2964-2985
    • /
    • 2019
  • Global data center IP traffic is expected to reach 20.6 zettabytes (ZB) by the end of 2021. Intra-data center networks (Intra-DCN) will account for 71.5% of the data center traffic flow and will be the largest portion of the traffic. The understanding of traffic distribution in IntraDCN is still sketchy. It causes significant amount of bandwidth to go unutilized, and creates avoidable choke points. Conventional transport protocols such as Optical Packet Switching (OPS) and Optical Burst Switching (OBS) allow a one-sided view of the traffic flow in the network. This therefore causes disjointed and uncoordinated decision-making at each node. For effective resource planning, there is the need to consider joining the distributed with centralized management which anticipates the system's needs and regulates the entire network. Methods derived from Kalman filters have proved effective in planning road networks. Considering the network available bandwidth as data transport highways, we propose an intelligent enhanced SDN concept applied to OBS architecture. A management plane (MP) is added to conventional control (CP) and data planes (DP). The MP assembles the traffic spatio-temporal parameters from ingress nodes, uses Kalman filtering prediction-based algorithm to estimate traffic demand. Prior to packets arrival at edges nodes, it regularly forwards updates of resources allocation to CPs. Simulations were done on a hybrid scheme (1+1) and on the centralized OBS. The results demonstrated that the proposition decreases the packet loss ratio. It also improves network latency and throughput-up to 84 and 51%, respectively, versus the traditional scheme.

생의학 학술 문헌의 불확실성 기반 지식 동향 분석에 관한 연구 (Knowledge Trend Analysis of Uncertainty in Biomedical Scientific Literature)

  • 허고은;송민
    • 정보관리학회지
    • /
    • 제36권2호
    • /
    • pp.175-199
    • /
    • 2019
  • 불확실성이란 정보의 합의나 현존하는 지식 부족으로 인해 명제의 지식이 불완전한 상태를 의미한다. 과학적 지식의 불확실성을 연구하는 학술문헌의 양은 시간이 흐름에 따라 기하급수적으로 증가하고 있으며, 이에 따라 새로운 지식이 발견되고 연구가 발전하고 있다. 이처럼 시간의 흐름은 지식의 불확실성의 패턴을 발견하는데 중요한 요인이 될 수 있음에도 불구하고 기존의 연구들은 불확실성 단어의 단순 출현 빈도를 기반으로 특정 학문 영역에서 불확실성의 특성을 파악해왔다. 따라서, 본 연구에서는 구축한 불확실성 단어를 생의학 영역의 불확실성 연구에 적용하여 시간의 흐름에 따른 불확실성의 변화와 패턴을 파악하고자 한다. 시간의 흐름에 따른 생의학 지식의 패턴을 분석하기 위해 대표 개체 페어, 동사 유형, 대표 개체의 패턴을 살펴보았으며 선형회귀 분석을 통해 유의성 검증을 수행했다. 개체 페어 분석에서는 17건 중 7건의 개체 페어가 유의하게 감소하는 패턴을 보였다. 10개의 대표적인 동사 유형은 모두 시간이 흐름에 따라 유의하게 감소했다. 대표 개체의 연도별 상대적 중요도 분석에서는 유의하게 상승과 하강 패턴을 보이는 개체들의 불확실성 증감을 분석했다.

MRG(Mechanical Rubber Goods) 보강사 제조시스템의 건조부에서의 배기구 형상이 유동 및 온도 분포에 미치는 영향에 관한 연구 (A Study on the Effect of the Shape of the Exhaust Port on the Flow and Temperature Distribution in the Drying Part of the MRG(Mechanical Rubber Goods) Reinforcing Yarn Manufacturing System)

  • 김환국;권혜인;도규회
    • 한국염색가공학회지
    • /
    • 제34권2호
    • /
    • pp.109-116
    • /
    • 2022
  • Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.

플로우 4경로모형의 마음상태와 플레이(play) (State of Mind in the Flow 4-Channel Model and Play)

  • 손준상
    • 마케팅과학연구
    • /
    • 제17권2호
    • /
    • pp.1-29
    • /
    • 2007
  • 본 연구에서는 플로우 4경로모형에서 마음상태와 플레이(play)가 하는 역할과 그 결과를 분석하고자 하였다. 이를 위해서 선행요인인 도전감 및 숙련도의 조합에 따른 마음상태를 측정하고, 플레이를 플로우 4경로모형에 투입하여 플로우이론에서 가설적으로 제시하고 있는 마음상태와 플레이의 영향관계를 분석하였다. 또한 플로우와 플레이의 웹충성도에 대한 영향도 분석하였다. 가설검정 결과에서는 첫째, 도전감과 숙련도의 조합에 따라 플로우, 두려움, 지루함, 무관심의 마음상태가 형성되는 것이 확인되었다. 그러나 두려움의 수준은 도전감과 숙련도가 모두 가장 낮은 무관심집단에서 가장 높게 나타났다. 이런 결과는 플로우이론의 설명과 일치하지 않는데, 무관심집단은 두려움으로 인해 온라인 쇼핑을 회피하는 것으로 해석할 수 있다. 둘째, 도전감과 숙련도에 따라 구분된 집단 간에 플레이 수준에서 유의적인 차이가 있는 것으로 나타났다. 셋째, 플레이는 플로우에 대해서는 정(+)의 영향을 미쳤고, 지루함에 대해서는 부(-)의 영향을 미쳤다. 그러나 두려움과 무관심에 대해서는 부(-)의 영향효과가 유의적이지 않았다. 넷째, 플레이와 플로우는 웹충성도에 유의적인 정(+)의 영향을 미치는 것으로 나타났고, 부정적 마음상태인 두려움, 지루함, 무관심은 웹충성도에 부(-)의 영향을 미쳤다. 플레이의 웹충성도에 대한 영향은 부정적 마음상태에서 강화되는 것으로 나타났다. 본 연구에서는 플로우 4경로모형에서의 마음상태를 확인하기 위해 이를 측정할 수 있는 척도를 개발하여 사용하였다. 마음상태별로 수립한 4개의 구조방정식 모형을 통해 플로우 뿐만 아니라 두려움, 지루함, 무관심의 부정적 마음상태에서 발생하는 영향관계를 종합적으로 입증하였다. 이런 결과는 부정적 마음상태의 영향을 확인하였다는 점에서 이론발전에 기여하였다고 본다. 또한, 플로우모형에서 플레이의 역할을 규명하였다는 점에서도 의미가 있다. 본 연구는 실무적으로도 인터넷 소비자들의 마음상태에 따른 시장세분화와 플레이를 활용한 마케팅전략수립에 시사점을 제공한다.

  • PDF

두께에 따른 이중 중합형 복합레진의 중합 (Polymerization of dual cured composites by different thickness)

  • 김윤주;진명욱;김성교;권태엽;김영경
    • Restorative Dentistry and Endodontics
    • /
    • 제33권3호
    • /
    • pp.169-176
    • /
    • 2008
  • 본 연구는 이중 중합형 복합레진에서 재료의 두께, 충전방법 및 중합방법에 따른 중합도를 미세경도 시험을 이용하여 측정하고자 하였다. 이중 중합형 복합레진으로는 MultiCore Flow (Ivovlar Vivadent AG, Schaan, Liechtenstein)와 Bis-Core (Bisco Inc., Schaumburg IL, USA)를 사용하였다. 시편의 제작은 각각 두께가 2(단일충전), 4 (단일충전), 6 (단일충전과 적층충전), 8 (단일충전과 적층충전) ㎜의 Teflon mold에 재료를 주입한 다음 할로겐 광중합기 (Optilux 501, Kerr, Danbury, USA)를 사용하여 광중합하거나 암실에서 30분 동안 기다린 후(자가 중합) Teflon mold에서 제거하였다. 제거한 시편은 $37{\circ}C$ 증류수에 24시간 동안 보관한 후 각 시편의 윗면과 아랫면을 2000번 연마제와 PoGo system (Dentsply, Konstanz, Germany)을 이용하여 마무리하였다. Digital microhardness tester (FM-7, Future-Tech Corp., Tokyo, Japan)를 이용하여 경도값(Knoop hardness number)을 측정하였으며 윗면의 경도값/아랫면의 경도값을 이용하여 경도비를 계산하였다. 계측치는 one-way ANOVA로 통계 분석 후 사후검정은 Scheffe 다중비교법을 이용하였다. 이중 중합형 복합레진의 중합도에 대한 두께의 영향을 보면 재료에 따라 다른 결과를 보였다. 2, 4, 6 mm 군에서는 MulriCore Flow와 Bis-Core 모두 두께에 의한 영향을 받지 않았지만 8 mm 군에서는 MultiCore Flow의 아랫면에서 다른 두께의 군보다 낮은 경도값을 보였다. 충전방법에 따른 중합도의 차이를 보면, 재료의 두께나 재료에 따라 다른 결과를 보였다. 6 mm 군에서는 단일충전군과 적층충전군 사이에 차이를 보이지 않았으나, 8 mm 군에서는 Bis-Core에서는 차이가 없는 반면 MultiCore Flow에서는 단일충전한 군이 적층중전한 군보다 낮은 경도비를 보였다. 중합방법에 따른 중합도의 차이를 보면, 재료에 따라 다른 결과를 보였다. Bis-Core의 경우에는 윗면과 아랫면 모두에서 이중 중합 시킨 군이 자가 중합 시킨 군보다 높은 경도값을 보였다. 그러나 MultiCore Flow의 경우, 윗면에서는 이중중합 시킨 군이 더 높은 경도값을 보였지만 아랫면에서는 더 낮은 값을 보였다. 따라서 본 연구의 결과에 따르면 코어용 이중 중합형 복합레진을 깊은 와동에 충전할 경우 적층충전이 추천되며, 또한 광중합을 해 줌으로써 더 좋은 물리적 성질을 기대할 수 있을 것으로 사료된다.

두께에 따른 이중 중합형 복합레진의 중합 (Polymerization of dual cured composites by different thickness)

  • 김윤주;진명욱;김성교;권태엽;김영경
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
    • /
    • pp.169-176
    • /
    • 2008
  • 본 연구는 이중 중합형 복합레진에서 재료의 두께, 충전방법 및 중합방법에 따른 중합도를 미세경도 시험을 이용하여 측정하고자 하였다. 이중 중합형 복합레진으로는 MultiCore Flow (Ivovlar Vivadent AG, Schaan, Liechtenstein)와 Bis-Core (Bisco Inc. Schaumburg IL, USA)를 사용하였다. 시편의 제작은 각각 두께가 2 (단일충전). 4 (단일충전), 6 (단일충전과 적층충전), 8 (단일충전과 적층충전) mm의 Teflon mold에 재료를 주입한 다음 할로겐 광중합기 (Optilux 501 Kerr, Danbury, USA)를 사용하여 광중합하거나 암실에서 30분 동안 기다린 후(자가 중합) Teflon mold에서 제거하였다. 제거한 시편은 $37^{\circ}C$ 증류수에 24시간 동안 보관한 후 각 시편의 윗면과 아랫면을 2000번 연마제와 PoGo system (Dentsply, Konstanz, Germany)을 이용하여 마무리하였다. Digital microhardness tester (FM-7, Future-Tech Corp., Tokyo, Japan)를 이용하여 경도값(Knoop hardness number)을 측정하였으며 윗면의 경도값/아랫면의 경도값을 이용하여 경도비를 계산하였다. 계측치는 one-way ANOVA로 통계 분석 후 사후검정은 Scheffe 다중비교법을 이용하였다. 이중 중합형 복합레진의 중합도에 대한 두께의 영향을 보면 재료에 따라 다른 결과를 보였다. 2, 4, 6 mm군에서는 MultiCore Flow와 Bis-Core 모두 두께에 의한 영향을 받지 않았지만 8 mm 군에서는 MultiCore Flow의 아랫면에서 다른 두께의 군보다 낮은 경도값을 보였다. 충전방법에 따른 중합도의 차이를 보면 재료의 두께나 재료에 따라 다른 결과를 보였다. 6 mm 군에서는 단일충전군과 적층충전군 사이에 차이를 보이지 않았으나, 8 mm 군에서는 Bis-Core에서는 차이가 없는 반면 MultiCore Flow에서는 단일충전한 군이 적층충전한 군보다 낮은 경도비를 보였다. 중합방법에 따른 중합도의 차이를 보면, 재료에 따라 다른 결과를 보였다. Bis-Core의 경우에는 윗면과 아랫면 모두에서 이중 중합 시킨군이 자가 중합시킨 군보다 높은 경도값을 보였다. 그러나 MultiCore Flow의 경우, 윗면에서는 이중중합 시킨 군이 더 높은 경도값을 보였지만 아랫면에서는 더 낮은 값을 보였다. 따라서 본 연구의 결과에 따르면 코어용 이중 중합형 복합레진을 깊은 와동에 충전할 경우 적층충전이 추천되며, 또한 광중합을 해줌으로써 더 좋은 물리적 성질을 기대할 수 있을 것으로 사료된다.

  • PDF

산화석 금속피막저항기에 관한 연구 (A Study on the Deposition of Tin Oxide Resistance Films through the Chemical Vapour Reaction Process)

  • 정만영;박계영
    • 대한전자공학회논문지
    • /
    • 제4권1호
    • /
    • pp.3-12
    • /
    • 1967
  • 증기반응법에 의한 산화석금속피막저항기(Tin Oxide Film Resistor)의 제법을 연구하고 이방법을 이용하여 제조한 저항피막의 전기적 성질을 관찰하였다. 이때 봉상의 파이렉스 유리(Pyrex glass rod) 표면에 산화석피막을 입혔다. 이 방법은 균질한 저항피막을 쉽게 얻을 수 있고, 진공계를 필요하지 않으므로 대량생산에 적합한 제법의 기초가 된다고 할수 있다. 본제법에 의하여 만든 제품중 표면저항 25ohm/sq에서 저항온도계수(T.C.R) 12ppm을 얻었다.

  • PDF

태풍 민들레의 온대저기압화 과정에 대하여 (On Extratropical Transition of Tropical Cyclone MINDULLE)

  • 권혁조;김지영
    • 대기
    • /
    • 제15권1호
    • /
    • pp.17-25
    • /
    • 2005
  • A significant number of tropical cyclones move into the midlatitudes and go through transformation procedure into extratropical cyclones. This process is generally referred to as extratropical transition of the tropical cyclone. In this study, MIDULLE(0407) case is selected. A thorough analysis is made using the GDAPS analysis data and MTM (Moving-nest Typhoon Model) model output. It is found that during the extratropical transition an important dynamics in the environmetal flow field occurs in which colder, drier (warm, moist) air penetrates in the western (eastern) quadrant of MINDULLE's outer circulation, which in turn initiates an asymmetry in the distribution of wind and temperature of the tropical cyclone. Simulated MTM result also reveals similar properties as in GDAPS analysis data. MTM result shows the gradual transition to the asymmetric distribution of wind and thickness as the extratropical transition proceeds. It is also found that the warm core disappears during the extratropical transition stage. Also, vortex tube is shown tilting towards the west during the transition. And the precipitation expands poleward of the center and the maximum precipitation appears to the left of MINDULLE which is consistent to the observations.