• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.318-325
• /
• 2019

This study analyzes current self-nail tips and nail-tip satisfaction. The study method selected from 3 domestic and 3 overseas companies analyzed current self-nail tips based on brand recognition and sales rate. A questionnaire was conducted on 261 adult women in their 20s and 50s about the satisfaction of nail care and self-nail tips. The results are as follows. As a result to analyze the current nail tips, there were products that did not contain the type of nail tip or the composition and ingredients of the glue. An online survey of the sizes of the current nail tips indicated differences in the sizing system method and that the presented sizes are different. The response rate was the highest for the survey results on why self-nail tips were preferred for respondents who prefer self-nail tips because the price was cheap. The reason why they did not prefer self-nail tips was that the degree of completeness was lower and the fitness was not good. In addition, it showed a high response rate in that the adhesive strength was poor and the size did not fit the nails. Therefore, it is necessary to develop a size for nail types by ergonomic design and develop a self-nail tip that can reduce nail damage.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.273-282
• /
• 2009

As a result of investigating research papers concerning the metal bound rim decoration on four pieces of 'Bowl, white porcelain with impressed floral design and sliver bound rim' and one piece of 'Bowl, white porcelain with sliver bound rim' from among the Jingdezhen white porcelain, which are Sinan remains that are kept in a National museum of Korea. It was found that the material of the bound rim was not silver but tin, and lacquer was used as glue. Based on such a scientific analysis, this study conducted a reproduction test of the manufacturing technique and the bonding method of the metal bound rim attached to the upper tip of the china ware. As a way of reproducing the bound rim, the study was able to discover the best method in terms of the avoidance of loss of materials and the workability out of various cutting methods for tin plates, and it also discovered that the use of lacquer in mixture with soil showed a better workability than the use only of a lacquer ingredient in a test of the bonding method of a metal bound rim using lacquer. Also, in the test of a drying method, a bonding method after drying within a short time at a relatively high temperature was found to be more effective than the drying method after humidifying at a normal temperature, which is used in traditional lacquer ware preservation treatment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.217-224
• /
• 2019

Phthalates, endocrine disrupting chemicals, are similar in structure to sex hormones and mainly show reproductive toxicity and developmental toxicity. In this study, we analyzed 11 phthalates, including 3 kinds of phthalates prohibited in cosmetic use and 8 kinds of phthalates regulated in 'Common standards for children's products safety' and EU cosmetic regulation (EC No. 1223/2009). The phthalate analysis was optimized using GC-MS/MS. In analytical method validation, this method was satisfied in specificity, linearity, recovery rate, accuracy and MQL. Therefore, we used this method to analyze 82 products of Nail cosmetics & polish. Although six phthalates such as DBP, BBP, DEHP, DPP, DIBP and DIDP were detected at concentrations of $1.0{\sim}59.8{\mu}g/g$g, they were suitable to Korean cosmetic standards. DIBP and DBP were detected at concentration of $1.1{\sim}2.6{\mu}g/g$ in artificial nail, DBP and DEHP were $1.4{\sim}2.5{\mu}g/g$ in glue for nails, and DIBP, DBP, and DEHP were $2.5{\sim}33.3{\mu}g/g$ in nail stickers. Although substances such as DBP and DEHP in artificial nail, Glue for nails, and nail stickers were detected, they were suitable to 'Common safety standards for children's products. DIBP is not a regulated substance in Korea but showed the third highest detection rate following DBP (84.6%) and DEHP (63.4%). The concentration of phthalates detected in nail products is considered to be safe in current standards but continuous monitoring and research about non-regulated substances are also needed to be considered.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.7
• /
• pp.891-895
• /
• 2001

Objective : Although surgical clipping of intracranial aneurysm is the definite method of treatment, there remains a small number of patients in whom surgical clipping is not technically possible. In such difficult cases, surgeon has to consider other therapeutic alternatives. In this report, we analyze our aneurysmal cases treated by wrapping and coating method and evaluate their surgical outcome and follow-up results. Method : Among the total of 877 patients operated from 1990 to 1999 for intracranial aneurysms at our hospital, 40 cases(4.6%) were treated by wrapping and coating method. They included 24 cases of single ruptured aneurysms and 16 with unruptured ones in multiple aneurysms. Wrapping with temporalis muscle and/or muslin gauze and coating with bioadhesive agent such as fibrin glue were performed. Result : Wrapping and coating method was performed mostly to the anterior communicating artery aneurysm (35%), and mostly because of the broad-based neck of an aneurysm(43%). At the time of discharge, 30 out of 40 patients(80%) showed favourable outcome and three cases died. The patients were monitored for average of 37 months(3-75 months). Among 24 cases with single ruptured aneurysm, 4 cases(17%) had early rebleeding within 6 months from the initial hemorrhage, and such rebleeding occurred within the first postoperative month in 3 cases. However, there was no rebleeding after the 6 months. Among 16 patients whose aneurysms were unruptured ones, none of them showed bleeding episode. Conclusion : It seems likely that the wrapping and coating method would be some help to prevent the rebleeding of an intracranial aneurysm. In order to obtain more accurate results regarding the efficacy of such method, it will be necessary to perform a multi-center study for longer follow-up periods and various wrapping and coating materials.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.196-205
• /
• 2020

The purpose of this study was to investigate a method for improving the physical and mechanical properties of laminated board made from oil palm trunk (OPT). The effects of pretreating the lamina with heat-pressure and altering the lamina composition of the laminated board were investigated. The outer third of OPT in cross-section had high-density wood, while the underlying third had low to medium density. The hot press was applied to pretreat the lamina that had low to medium density. The lamina were 1.5 cm in thickness, 5 cm in width, and 65 cm in length. The hot press was applied at 2.94 MPa or 4.41 MPa at 150 ℃ for 60 minutes, and the target thickness of the lamina was 1 cm. The three layers of the laminated board samples were bonded with isocyanate adhesive at a glue spread of 300 g/㎡ and cold pressed at 0.98 MPa for 3 h. The laminated board samples were tested according to Japanese Agricultural Standard (JAS) 234-2003. The results showed that the densification of the inner lamina did not significantly affect the physical-mechanical properties of the laminated board produced. However, the laminated board made with high-density laminas for the outer layers fulfilled the JAS 234-2003 standard for the modulus of elasticity and the modulus of rupture.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.425-436
• /
• 2018

This study was conducted to evaluate the planar (rolling) shear strength of OSB (oriented strand board) panels and domestic plywood through 5 point bending test method in ASTM D2718 standard. The test specimens were prepared in parallel and perpendicular direction to major axis (along the length of panels) and tested up to failure, and failure modes were also examined. From the test results, rolling shear strength were found to be $1.32{\sim}1.94N/mm^2$ in parallel to major axis, and $1.46{\sim}1.99N/mm^2$ in perpendicular to major axis respectively. Little difference was found between parallel and perpendicular direction of rolling shear strength. There were no statistically significant differences in rolling shear strength between Canadian OSB and domestic plywood in the parallel direction, and between Chilean OSB and domestic plywood in the perpendicular direction. The shear failure was observed in all tested OSB panels, whereas shear failure, glue line delamination, and bending combined with shear failure were observed in the domestic plywood.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.167-180
• /
• 2011

The portraits created in the age of Queen Elizabeth I show a very exquisite description about the ruff collar and cuffs representing the notable evolution of periodical costumes from a detailed viewpoint. This thesis analyzes the ruff collar and cuffs of the portraits of Queen Elizabeth I. The method used selects 32 pieces from the portraits of Queen Elizabeth I that are considered excellent depictions of a ruff collar and cuffs, to investigate size, form and decorations. Conclusively, the ruff collar tends to be extremely enlarged and thickened (coinciding with the development of glue) while the cuffs denote the aspect of double cuffs coupled with the turn-back cuffs without a change in size. These traits were widely shown from 1585 to 1587, while after 1588 the ruff cuffs completely disappeared in the portraits of Elizabeth I. At the same time, the change of a ruff collar was remarkable, the collar being in the erect position behind the head (with the use of supporters), of a consistent thickness and decoration of elaborate lace. During the transition period from the $16^{th}$ century to the $17^{th}$ century the earliest change was in cuffs followed by collars. This research is a helpful guide to detect the relatively exact date of portraits not definitively identified in the latter part of the $16^{th}$ century and to observe the microscopic evolution of costumes in the latter part of the $16^{th}$ century.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.52-58
• /
• 2004

Oak is one of major species in this country as well as pine, but has been less utilized because of its refractory properties. The purpose of this study is to develope an effective method for drying the boards and disks of Quercus variabilis. Among four end-coaters used in this study thick coating with polyvinyl acetate chrolide glue (PVAc) was proved as the most effective. The average air-drying rate of boards was 1.2%MC/day, which did not exceed the safe drying rate recommended by United States Department of Agriculture (USDA). The kiln drying schedule used in this study gave a good result in drying the air-dried boards to 8%MC without any internal checks. An attempt to prevent oak disks from V-cracking during air-drying using special pallet-type stickers was not successful.

• Journal of Gastric Cancer
• /
• v.24 no.1
• /
• pp.108-121
• /
• 2024

Anastomotic leaks and fistulas are significant complications of gastric surgery that potentially lead to increased postoperative morbidity and mortality. Surgical intervention is reserved for cases with severe symptoms or hemodynamic instability; however, surgery carries a higher risk of complications. With advancements in endoscopic treatment options, endoscopic approaches have emerged as the primary choice for managing these complications. Endoscopic clipping is a traditional method comprising 2 main categories: through-the-scope clips and over-the-scope clips. Through-the-scope clips are user friendly and adaptable to various clinical scenarios, whereas over-the-scope clips can close larger defects. Another promising approach is endoscopic stent insertion, which has shown a high success rate for leak closure, although vigilant monitoring is required to monitor stent migration. Infection control is essential in post-surgical leakage cases, and endoscopic internal drainage provides a relatively safe and noninvasive means to manage fluids, contributing to infection control and wound healing promotion. Endoscopic suturing offers full-thickness wound closure, but requires additional training and endoscopic versatility. As a promising tool, endoscopic vacuum therapy potentially surpasses stent therapy by draining inflammatory materials and closing defects. Furthermore, the use of tissue sealants, such as fibrin glue and cyanoacrylate, has been reported to be effective in selected situations. The choice of endoscopic device should be tailored to individual cases and specific patient conditions, with careful consideration of the nature of the defect. Further extensive studies involving larger patient populations are required to provide more robust evidence on the efficacy of endoscopic approach in managing post-gastric anastomotic leaks.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.595-604
• /
• 2018

In this study, in a bid to develop natural bioadhesives for paper craft, the hanji industry, and preserving cultural assets, complex polysaccharides were extracted from brown and red algae and used as an ingredient in adhesives. Brown algae include sea trumpet, kelp, sea oak, and sea mustard, whereas red algae include Pachymeniopsis elliptica agar-agar weed, Gloiopeltis tenax, and hunori. The polysaccharides were extracted after transforming them from non-aqueous Ca complexes contained in each of the brown and red algae into water-soluble polysaccharides containing alkali metals with a solubility level of 1. and extracted Subsequently, only the polysaccharides were extracted using alcohol precipitation. The adhesion tensile strengths of kelp, a brown algae, and Pachymeniopsis elliptica, a red algae, were 21.58 and 32.99 kgf, respectively. They thus demonstrated better adhesion than that of solid glue products such as water plants (18.45 kgf) and glue sticks (20.45 kgf). The extraction yield of these polysaccharides is supposed to be determined according to their extracted environments; however, no difference in adhesion strength was seen. Further, it was found that the shapes of polysaccharides were determined by their growing environment instead of extraction environment. Use of multi-step alcohol precipitation method during extraction enabled the removal of the constituents except protein and other polysaccharides, thereby demonstrating a stable outcome without cultivation of mold. Furthermore, there was no occurrence of mold even after production of the adhesives by the simple solution method, which demonstrates the adhesive's potential as an environment-friendly adhesive material.