• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.385-392
• /
• 2010

A LiDAR technique has the merits that survey engineers can get a large number of measurements with high precision quickly. Aerial photos and satellite sensor images are used for generating 3D spatial images which are matched with the map coordinates and elevation data from digital topographic files. Also, those images are used for matching with 3D spatial image contents through perspective view condition composed along to the designated roads until arrival the corresponding location. Recently, 3D aviation image could be generated by various digital data. The advanced geographical methods for guidance of the destination road are experimented under the GIS environments. More information and access designated are guided by the multimedia contents on internet or from the public tour information desk using the simulation images. The height data based on LiDAR is transformed into DEM, and the real time unification of the vector via digital image mapping and raster via extract evaluation are transformed to trace the generated model of 3-dimensional downtown building along to the long distance for 3D tract model generation.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.19-35
• /
• 1997

The purpose of this study is to find out the characteristics of landform in Geoje-Do using GIS and DTED data. The characteristics of landform in Geoje-Do are as follows; First, the height-range of Geoje-Do is $0{\sim}580m$, and the average elevation of it is 124m. Volcanic and granite region is mainly appeared at high elevation-region. But, we can't find out outstanding difference of elevation, according to its geology. The second. the slope-range of Geoje-Do is $0{\sim}52$ degree, and the average slope of it is 17.6 degree. The slope of volcanic and granite area is more steeper than any other region. But the results of analysis of the geology in Geojo-Do, don't show outstanding difference of the slope. The third, the area-rate of the aspect of Geoje-Do is almost same in all direction. And the area-rate of south-west direction is the highest. According to the geology of Geoje-Do, granite is distributed the most widely, and the area of volcanic and granite occupy 60% of entire island's area. According to analysis of influence of geology with elevation, geology has little relationship with elevation. According to analysis of geology and drainage network, streams are inclined to be developed well in Alluvium area. Drainage network is well developed throughout the entire island, except southeast area. The highest order of stream is 4 in 1:25,000 topographic map. The density of stream in Geoje-Do is very high, such as 1.6. The bifurcation-ratio of stream is also higher than 4 in all order. The length-ratio of stream is ranged from 1.24 to 3.25. According to the relationship between order and elevation. order is the greater, elevation is the lower. According to the relationship between order and slope, order is the greater, slope is the gentler. In this study, we use DTED Data, and compare it with topographic map data. According to the comparison, there is a little difference between DTED data and topographic map data. Therefore, to use DTED data in landform analysis, it is required coordinate matching process. This process is very important, and take very long time. Thus, if you use DTED in landform analysis, some processes are required. DTED data can be taken very easily, but its using is not simple. Because coordinate adjust is very hard work.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.100-105
• /
• 2008

EPCglobal은 기업 간의 물류 활동 촉진과 글로벌 유통물류 시스템 구축을 위하여 EPCglobal Architecture Framework을 제시 하였다. EPCglobal Architecture Framework의 한 구성 요소인 EPCIS(Electronic Product Code Information Services)는 EPC, 시간, 위치와 같은 물류 관련 정보에 대해 저장 및 검색 서비스를 제공한다. EPCIS는 단발성 질의(poll)와 연속 질의(subscribe) 검색 서비스를 제공한다. EPCIS의 연속 질의는 시스템 자동화 및 재고 관리, 공급망 관리를 위해 다양한 응용에서 활용이 가능하다. 일반적으로 연속 질의 처리를 위해서는 등록된 연속 질의와 입력된 데이터를 순차적으로 비교하는 Sequential Matching 기법을 사용한다. Sequential Matching기법은 등록된 연속 질의 수가 증가 할 경우 많은 부하를 발생 시키고, 이로 인해 시스템 처리 지연이 발생한다. 본 논문에서는 EPCIS의 시공간 EPC 데이터의 연속질의 처리 성능 향상을 위해 선택률 기반 효율적인 연속질의 처리 기법을 제안한다. 13차원의 도메인을 여러 개의 질의 색인으로 구성하고, 등록된 질의 정보를 기반으로 선택률을 계산한다. 선택률에 의해 변경되는 동적 질의 실행 계획을 제안함으로써, EPCIS에서 시공간 EPC 데이터의 연속질의 처리에 대해 평균 60%의 성능이 향상이 가능하도록 하였다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.234-237
• /
• 2007

Road networks are important geospatial databases for various GIS (Geographic Information System) applications. Road digital maps may contain geometric spatial errors due to human and scanning errors, but manually updating roads information is time consuming. In this paper, we developed a new road features updating methodology using from multispectral high-resolution satellite image and pre-existing vector map. The approach is based on initial seed point generation using line segment matching and a modified double snake algorithm. Firstly, we conducted line segment matching between the road vector data and the edges of image obtained by Canny operator. Then, the translated road data was used to initialize the seed points of the double snake model in order to refine the updating of road features. The double snake algorithm is composed of two open snake models which are evolving jointly to keep a parallel between them. In the proposed algorithm, a new energy term was added which behaved as a constraint. It forced the snake nodes not to be out of potential road pixels in multispectral image. The experiment was accomplished using a QuickBird pan-sharpened multispectral image and 1:5,000 digital road maps of Daejeon. We showed the feasibility of the approach by presenting results in this urban area.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.511-516
• /
• 2004

수치표고모델, 정사영상과 같은 공간영상정보를 구축하기 위해서는 입체영상을 이동한 영상정합(image matching)의 과정이 필수적이며, 단영상 또는 스테레오 영상을 이용하여 대상물의 3차원 정보를 재구성하고 복원하는 기술은 사진측량 및 컴퓨터 비전 분야의 주요 연구 중의 하나이다. 본 연구에서는 화소값의 유사성과 상호관계성을 고려하는 MRF 모델을 이용하여 영상정합을 수행하였다. MRF 모델은 공간분석이나 물리적 현상의 전후관계(contextural dependencies)의 분석을 위한 확률이론의 한 분야로 다양한 공간정보를 통합할 수 있는 방법을 제공한다. 본 연구에서는 기준영상의 화소에 시차를 할당하는 접근 방법으로 확률모델의 일종인 마르코프 랜덤필드(MRF)모델에 기반한 영상정합기법을 제안하였고, 공간내 화소의 상호관계를 고려해주므로 대상물의 경계부분에서의 매칭 정확도를 향상시켰다. 영상정합문제에서의 MRF 기본가정은 영상 내 특정화소의 시차는 그 주위화소의 시차에 의한 부분정보에 따라 결정이 가능하다는 것이다. 깁스분포(gibbs distribution)를 사용하여 사후(posteriori) 확률값을 유도해내고, 이를 최대사후확률(MAP: Maximum a Posteriori)추정법을 이용하여 에너지함수를 생성하였다. 생성된 에너지함수의 최적화(Optimization)를 위하여 본 연구에서는 전역최적화기법인 multiway cut 기법을 사용하여 영상정합에 있어 에너지함수를 최소로 하는 이미지화소에 대한 시차레이블을 구하여 영상정합을 수행하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.286-292
• /
• 2008

RTLS 시스템은 이동 객체에 RTLS 태그를 부착한 후 태그에서 발산되는 신호를 이용하여 실시간으로 위치를 파악하는 시스템으로 최근 항만 물류 및 자산 관리 분야에서 객체의 실시간 위치를 파악하기 위해 활용되고 있다. RTLS 시스템은 태그의 위치를 측정하기 위해 삼각 측량 법이나, Proximity matching법을 사용한다. 삼각 측량법은 3개 이상의 리더에서 수신된 신호 세기나 신호의 도달 시간을 이용하여 삼각측량 방식으로 위치를 결정하는 알고리즘으로, 전파의 난반사나 장애물등에 민감하며, Proximity matching법은 위치 샘플링 값에 대한 근접성을 이용한 통계 정보를 바탕으로 하여 위치를 결정하는 알고리즘으로 위치 정확도를 높일 수 있으나, 샘플링 데이터 개수에 따라 정확도가 크게 변화하는 문제가 있다. 본 논문에서는 이러한 위치 정보의 오차를 줄이기 위하여, Fingerprint 방식의 확률 모델에 TDOA 방식에서 사용되는 요소들을 혼합하여 확률에 의한 불확실성을 줄이고 더 높은 정확도의 위치 정보를 전달하는 위치 보정 기법을 제안한다. 본 논문에서 제안하는 2단계 위치 보정 기법은 먼저, Fingerprint 데이터 셋으로부터 현재 측정된 위치의 신호정보를 이용한 확률 모델을 적용하여 단 하나의 후보자를 결정한다. 둘째, 측정된 정보와 후보자 위치 정보를 기반으로 TDOA에서 사용하는 기하학적 위치 결정 방법을 변형한 알고리즘을 이용해 측정된 위치를 보정함으로써, TDOA 방식이나, Fingerprint 방식 둘 중 하나만 사용하는 것보다 향상된 위치의 정확도를 제공한다. 그리고 본 논문에서는 제안한 위치 보정 기법을 위한 위치 보정 모듈을 설계하였으며, RTLS 미들웨어에 이를 반영하여 구현하였다.

• Korean Journal of Remote Sensing
• /
• v.21 no.3
• /
• pp.229-242
• /
• 2005

Photogrammetry is a current method of GIS data acquisition. However, as a matter of fact, a large manpower and expenditure for making detailed 3D spatial information is required especially in urban areas where various buildings exist. There are no photogrammetric systems which can automate a process of spatial information acquisition completely. On the other hand, LiDAR has high potential of automating 3D spatial data acquisition because it can directly measure 3D coordinates of objects, but it is rather difficult to recognize the object with only LiDAR data, for its low resolution at this moment. With this background, we believe that it is very advantageous to integrate LiDAR data and stereo CCD images for more efficient and automated acquisition of the 3D spatial data with higher resolution. In this research, the automatic urban object recognition methodology was proposed by integrating ultra highresolution stereo images and LiDAR data. Moreover, a method to enable more reliable and detailed stereo matching method for CCD images was examined by using LiDAR data as an initial 3D data to determine the search range and to detect possibility of occlusions. Finally, intellectual DSMs, which were identified urban features with high resolution, were generated with high speed processing.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1259-1268
• /
• 2004

To organize training in limited training area for an actuai combat, realistic training simulation plugged in by various battle conditions is essential. In this paper, we propose a virtual target overlay technique which does not use a virtual image, but Projects a virtual target on ground-based CCD image by appointed scenario for a realistic training simulation. In the proposed method, we create a realistic 3D model (for an instructor) by using high resolution Geographic Tag Image File Format(GeoTIFF) satellite image and Digital Terrain Elevation Data (DTED), and extract the road area from a given CCD image (for both an instructor and a trainee). Satellite images and ground-based sensor images have many differences in observation position, resolution, and scale, thus yielding many difficulties in feature-based matching. Hence, we propose a moving synchronization technique that projects the target on the sensor image according to the marked moving path on 3D satellite image by applying Thin-Plate Spline(TPS) interpolation function, which is an image warping function, on the two given sets of corresponding control point pair. To show the experimental result of the proposed method, we employed two Pentium4 1.8MHz personal computer systems equipped with 512MBs of RAM, and the satellite and sensor images of Daejoen area are also been utilized. The experimental result revealed the effective-ness of proposed algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.79-89
• /
• 2022

Images taken using drones have been applied to fields that require rapid decision-making as they can quickly construct high-quality 3D spatial information for small regions. To construct spatial information based on drone images, it is necessary to determine the relationship between images by extracting keypoints between adjacent drone images and performing image matching. Therefore, in this study, three study regions photographed using a drone were selected: a region where parking lots and a lake coexisted, a downtown region with buildings, and a field region of natural terrain, and the performance of AKAZE (Accelerated-KAZE), BRISK (Binary Robust Invariant Scalable Keypoints), KAZE, ORB (Oriented FAST and Rotated BRIEF), SIFT (Scale Invariant Feature Transform), and SURF (Speeded Up Robust Features) algorithms were analyzed. The performance of the keypoints extraction algorithms was compared with the distribution of extracted keypoints, distribution of matched points, processing time, and matching accuracy. In the region where the parking lot and lake coexist, the processing speed of the BRISK algorithm was fast, and the SURF algorithm showed excellent performance in the distribution of keypoints and matched points and matching accuracy. In the downtown region with buildings, the processing speed of the AKAZE algorithm was fast and the SURF algorithm showed excellent performance in the distribution of keypoints and matched points and matching accuracy. In the field region of natural terrain, the keypoints and matched points of the SURF algorithm were evenly distributed throughout the image taken by drone, but the AKAZE algorithm showed the highest matching accuracy and processing speed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.271-277
• /
• 2018

Generating an epipolar image which is removed a y-parallax from an original image is an essential technique for creating a 3D stereoscopic model or producing a map. In epipolar image production, there is a method of generating epipolar images by estimating the relative orientation parameters after matching the extracted distinct points in two images and a method of generating epipolar images by using the baseline and rotation angles of the two images after determining the exterior orientation parameters In this study, it was proposed a methodology to generate epipolar images using direction cosine in the exterior orientation parameters of the input images, and a method to use the transformation matrix for easy calculation when converting from the original image to the epipolar image. The applicability of the proposed methodology was evaluated by using images taken from the fixed wing and rotary wing drones. As a result, it was found that epipolar images were generated regardless of the type of drones.