• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.602-604
• /
• 2006

한국천문연구원(KASI)은 국제 GNSS 관측망(IGS)의 글로벌 데이터 센터(GDC)를 설립하였다. KASI GDC는 공식적으로 IGS GDC이고 세계 4번째로 설립되었으며, 아시아 및 오세아니아 지역에서는 최초이다. KASI GDC는 IGS GNSS 데이터를 기록하고, IGS GPS 데이터와 IGS 산출물을 인터넷을 통해 제공한다. GDC에서 다루는 데이터의 양은 매우 빠르게 증가한다. GDC 데이터의 대용량을 처리하기 위해서는 시스템의 높은 효율성과 신뢰성이 요구된다. 그래서 KASI GDC는 높은 신뢰성과 대용량 저장 장치를 필요로 하는 저장 시스템을 구성하기 위해 RAID와 LVM을 적용했다. KASI GDC의 공식 출범 이후 데이터 이용 현황을 확인하고, 항상 시스템이 Active 상태로 유지하기 위한 무정전 시스템 구성에 대해 기술한다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.195-198
• /
• 2010

It has been considered to apply GDC ($Gd_{0.1}Ce_{0.9}O_{1-X}$) for low-temperature SOFC electrolytes because it has higher ionic conductivity than YSZ at low temperature. However, open circuit voltage with using GDC ($Gd_{0.1}Ce_{0.9}O_{1-X}$) electrolyte in SOFCs, becomes lower than using YSZ (8 mol% Yttria stabilized Zirconia) electrolyte because GDC has electronic conductivity. In this work, the effect of changing GDC electrolyte thickness on the open circuit voltage has been investigated. Ni-GDC anode-supported unit cells were fabricated as follows. Mixed NiO-GDC powders were pressed and pre-sintered at $1200^{\circ}C$. And then, GDC electrolyte material was dip-coated on the anode and sintered at $1400^{\circ}C$. Finally the LSCF-GDC cathode material was screen-printed on the electrolyte and sintered at $1000^{\circ}C$. Electrolyte thickness was controlled by the number of dip-coating times. Open circuit voltage was measured depending on electrolyte thickness at $650^{\circ}C$ and found that the thicker GDC electrolyte was, the better OCV was.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.740-746
• /
• 2007

The potential candidates for IT-SOFCs cathode materials, $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ (BSCF) and $La_{0.6}Ba_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LBCF) powders, were synthesized by a EDTA-citrate combined method from $Sr(NO_3)_2$, $Ba(NO_3)_2$, $La(NO_3)_3{\cdot}6H_2O$, $Co(NO_3)_2{\cdot}6H_2O$, $Fe(NO_3)_3{\cdot}9H_2O$, citric acid and $EDTA-NH_3$. The cathode performance of symmetrical electrochemical cells consisting of BSCF-GDC or LBCF-GDC composite electrodes and a GDC electrolyte was investigated using by AC impedance spectroscopy at the temperature range of 500 to $700^{\circ}C$. It was found that a single phase perovskite could be successfully synthesized when the precursor is heated at $850^{\circ}C$ for 2 h. Due to thermal expansion mismatch between BSCF and GDC, the composite cathodes with lower GDC content than 45 wt% were peeled off from the GDC electrolyte and their electrode polarization resistance was estimated to be high. The thermal expansion coefficient of BSCF-GDC composites was decreased with increasing the GDC content and the electrode peeling off did not occur in BSCF-45 and 55 wt% GDC composites. BSCF-45 wt% GDC composite electrode showed the lowest area specific resistances (ASR) of 0.15 and $0.04{\Omega}{\cdot}cm^2$ at 600 and $700^{\circ}C$, respectively. On the other hand, LBCF-GDC composite cathodes showed higher ASR than the BSCF-45 and 55 wt% GDC and their cathode performance were decreased with the GDC content.

• 디지털콘텐츠
• /
• 4호통권119호
• /
• pp.30-32
• /
• 2003

GDC(Game Developer Conference)2003 (이하 GDC)은 Make Better Game 이라는 모토로 지난 3월 5일부터 8일 까지 미국 신경제 중심지 산호세에서 개최됐다. GDC는 세계 게임 기술 동향 및 시장 전망을 조망하는 국제 콘퍼런스로 E3, 도쿄게임쇼, ECTS 등이 게임 퍼블리셔와 비즈니스 중심인 반면 GDC는 게임개발에서 체험한 게임 노하우를 상호 교환하는 '게임개발자 중심'의 컨퍼런스가 모태가 되었다는 점에서 여타 컨퍼런스와 다른 특징이 있다.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.576-580
• /
• 2018

In this study, a small amount of CoO was added to commercial Gd-doped $CeO_2$ (GDC) powder. The CoO addition greatly enhanced sinterability at low temperatures, i.e., more than 98% of relative density was achieved at $1,000^{\circ}C$. When GDC/8YSZ (8 mol% yttrium stabilized zirconia) bilayers were sintered, Co-doped GDC showed excellent adhesion to the YSZ electrolyte. Transmission electron microscope (TEM) analysis showed that there were no traces of liquid films at the grain boundaries of GDC, whereas liquid films were observed in the Co-doped GDC sample. Because liquid films facilitate particle rearrangement and migration during sintering, mechanical stresses at the interface of a bilayer, which are developed based on different densification rates between the layers, might be reduced. In spite of $Co^{2+}$ doping in GDC, the electrical conductivity was not significantly changed, relative to GDC.

• 멤브레인
• /
• 제24권5호
• /
• pp.367-374
• /
• 2014

본 연구에서는 LSCF/GDC (20 : 80 vol%) 복합 분리막 표면에 LSC/GDC (50 : 50 vol%) 활성층을 코팅한 후 활성층의 열처리 온도, 두께, 침투법을 이용한 STF 도입이 산소투과 특성에 미치는 영향을 고찰하였다. 활성층 도입은 복합 분리막의 산소 투과 유속을 급격히 증진시켰으며 이는 활성층 성분인 LSC/GDC (50 : 50 vol%)가 전자 전도성 및 표면 산소 분해 반응을 증진시켰기 때문이었다. 활성층의 열처리 온도가 $900^{\circ}C$에서 $1000^{\circ}C$로 증가한 경우, 산소 투과 유속은 증가하였고 이는 분리막과 활성층 사이 그리고 활성층의 결정입간 접촉이 증진하여 산소이온과 전자 흐름을 증진시켰기 때문으로 설명되었다. 코팅층의 두께가 약 $10{\mu}m$에서 약 $20{\mu}m$로 증가한 경우, 산소 투과 유속은 오히려 감소하였는데 이는 코팅층의 두께가 증가할수록 기공을 통한 공기 중의 산소 유입이 어려워지기 때문으로 설명되었다. 또한, 코팅층에 침투법을 이용하여 STF를 도입한 경우가 STF를 도입하지 않은 경우 보다 높은 산소 투과 유속을 보였는데 이는 도입된 STF가 산소 분해하는 표면 반응 속도를 촉진시키기 때문이다. 본 연구로부터 LSC/GDC (50 : 50 vol%) 활성층 코팅 및 특성 제어는 LSCF/GDC (20 : 80 vol%) 복합 분리막의 산소투과 증진에 매우 중요함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.573-574
• /
• 2012

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.787-792
• /
• 2005

A symmetrical LSCF $(La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta})\;ScSZ(89ZrO_2-10Sc_2O_3-1CeO_2)/LSCF$ electrochemical cell with a GDC (Gadolinium-Doped Ceria, $90CeO_2-10Gd_2O_3$) interlayer that was inserted between the LSCF cathode and ScSZ electrolyte was fabricated, and the electrochemical performance of these cells was evaluated. The GDC interlayer was deposited on a ScSZ electrolyte using a screen-printing technique. The GDC interlayer prevented the unfavorable solid-state reactions at the LSCF/ScSZ interfaces. The LSCF cathode on the GDC interlayer had excellent electrocatalytic performance even at $650^{\circ}C$. The Area Specific Resistance (ASR) was strongly dependent on the thickness and heat-treatment temperature of the GDC interlayer. The impedance spectra showed that the cell with a $15\~27{\mu}m$ thick GDC interlayer heat-treated at $1200^{\circ}C$ had the lowest ASR.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.18-23
• /
• 2019

Chemical looping combustion (CLC) is a promising carbon capture and storage (CCS) technology whose efficiency and cost primarily relies on the oxygen carrier materials used. In this paper, gadolinium-doped ceria (GDC, Ce0.9Gd0.1O1.95) was added as a promoter to improve the oxygen transfer rate of MgMnO3-δ oxygen carrier materials. Increasing GDC content significantly increased the oxygen transfer rate of MgMnO3-δ-GDC composites for the reduction reaction due to an increase in the surface adsorption of CH4 via oxygen vacancies formed on the surface of the GDC. On the other hand, the oxygen transfer rate for the oxidation reaction decreased linearly with increasing GDC content due to the oxygen storage ability of GDC. Adsorbed oxygen molecules preferentially insert themselves into oxygen vacancies of the GDC lattice rather than reacting with (Mg,Mn)O to form MgMnO3-δ during the oxidation reaction.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.230-236
• /
• 2013

In this study, successive coating and co-sintering techniques have been used to fabricate LSM/GDC based cathode supported direct carbon fuel cells. The porous LSM/GDC cathode substrate, dense, thin and crack free GDC and ScSZ layers as bi-layer electrolyte, and a porous Ni/ScSZ anode layer was obtained by co-firing at $1400^{\circ}C$. The porous structure of LSM/GDC cathode substrate, after sintering at $1400^{\circ}C$, was obtained due to the presence of GDC phase, which inhibits sintering of LSM because of its higher sintering temperature. The electrochemical characterization of assembled cell was carried out with air as an oxidant and carbon particles in molten carbonate as fuel. The measured open circuit voltages (OCVs) were obtained to be more than 0.99 V, independent of testing temperature. The peak power densities were 116, 195 and $225mWcm^{-2}$ at 750, 800 and $850^{\circ}C$, respectively.