• Journal of the Korean Institute of Gas
• /
• v.11 no.2 s.35
• /
• pp.65-70
• /
• 2007

The explosion phenomenon and hazard estimate of LP gas, the study was examined into variation of oxygen concentration and LP gas concentration. As the result of experiment, the lower explosive limit was decreased as the increased at concentration of LP gas and 21% of oxygen concentration. Minimum oxygen concentration was 14.5%. 12.0%, 11.5% at 1.0, 1.5 and 2.0 bar respectively. And maximum explosion pressure was increased for $6.46kg/cm^2,\;9.41kg/cm^2\;and\;13.49kg/cm^2$ according to increased of pressure. The speed of flame propagation was increased as the higher with initial pressure of LP gas.

• Journal of Sensor Science and Technology
• /
• v.25 no.6
• /
• pp.423-430
• /
• 2016

This study used a single metal oxide semiconductor (MOS) sensor to classify the major odorous gases hydrogen sulfide ($H_2S$), ammonia ($NH_3$) and toluene ($C_6H_5CH_3$). In order to classify these odorous substances, the voltage on the MOS sensor heater was gradually reduced in 0.5 V steps 5.0 V to examine the changes to the response by the cooling effect on the sensor as the voltage decreased. The hydrogen sulfide gas showed the highest sensitivity compared to odorless air under approximately 2.5 V and the ammonia and toluene gases showed the highest sensitivity under approximately 5.0 V. In other words, the hydrogen sulfide gas reacted better in the low temperature range of the MOS sensor, and the ammonia and toluene gases reacted better in the high-temperature range. In order to analyze the response characteristics of the MOS sensor by temperature in a pattern, a two-dimensional (2D) x-y pattern analysis was introduced to clearly classify the hydrogen sulfide, ammonia, and toluene gases. The hydrogen sulfide gas was identified by a straight line with a slope of 1.73, whereas the ammonia gas had a slope of 0.05 and the toluene gas had a slope of 0.52. Therefore, the 2D x-y pattern analysis is suggested as a new way to classify these odorous substances.

• Journal of Advanced Engineering and Technology
• /
• v.11 no.4
• /
• pp.253-257
• /
• 2018

Exhaust gas from the combustion of automobiles adversely affects the human body and even pollutes the atmosphere. This study investigated the influence of exhaust gas change on intake manifold using the nozzle. First, the flow analysis was performed using the 3D flow analysis program. When the nozzle inlet air velocity increased, the average air velocity in the nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$ increased 37.3% and 31.9% respectively at the intake manifold outlet. As the nozzle inlet air velocity increased, the maximum flow rate of air increased to 42.2% and 32.6%, respectively at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$. In order to verify the analysis results, experiments on the exhaust gas were performed in the engine simulation system. As the nozzle inlet velocity increased, HC values decreased by 42.4% and 31.4% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$, respectively. And CO values decreased by 40.7% and 31.1% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$.

• KIEAE Journal
• /
• v.11 no.2
• /
• pp.67-74
• /
• 2011

Recently environmental regulations like the Kyoto Protocol, adopted in 1997, required the reduction of the greenhouse gas of 5.2% up to 1990's emissions and 13th General Assembly in 2007, held in Bali of India, have agreed to duty reduction even in developing countries in 2013. Korean government needs research on climate change and greenhouse gas management, such as carbon emissions calculation system and the introduction of greenhouse gas reduction program. Using Top-Down approach with method of IPCC, greenhouse gas emissions from energy, transportation, agriculture, land use and forest, and waste was calculated. Total amount from Shiheung-City in 2007 was about 3,299.581 tons of greenhouse gas $CO_2$. By sectors, the total greenhouse gas emissions in the energy sector mostly accounted for 78 percent, 12 percent from transportation, 6 percent of waste, the landuse/forest sector, 4% of the greenhouse gas emissions. Approximately 5,401,618 tons of the greenhouse gas $CO_2$ was total amount from Ansan-City in 2007. The share of energy sector greenhouse gas emissions was the highest portion of 79 % and 14 percent of transportation, 4% from the waste sector, 3 % from landuse/forest sector.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.120-125
• /
• 2015

This research aims to increase the reliability and reproducibility of the ambient cycling test by properly making corrections to the test procedure. The vessel (106 L) is initially filled with 70 L of water and horizontally placed on a balance. The pressure range inside the vessel varies from 2.5 to 25.9 MPa at the frequency of 6 cycles per minute. After reviewing the results, there was a temperature difference of approximately $10^{\circ}C$ between the air pocket and the water, and the upper part of the liner faced a repeated temperature change of $40^{\circ}C$. It is possible for the aluminum liner of the composite vessel to be damaged by such a sharp change in temperature. Additionally, as a result, no pass having anything to do with the purpose of the test would occur. Therefore, it is suggested that the air pocket be completely removed.

• 한국가스학회:학술대회논문집
• /
• no.5
• /
• pp.69-73
• /
• 2002

• Journal of environmental and Sanitary engineering
• /
• v.4 no.2 s.7
• /
• pp.91-99
• /
• 1989

An anaerobic acidogenic fermentation experiment was carried out in order to investigate the distribution of volatile acid products and gas generations with varing temperatures and pH values. The experiment was carried out using $1\%$ glucose as substrate and a pair of 3.5 liter vessle as bench scale batch reactors. The reactors were operated for 7 days at 25, 30 and $35^{\circ}C$ and at pH values of 4.0, 4.5, 5.0, 5.5 and 6.0 at each temperature conditions. Major products at all experiment pH's at $35^{\circ}C$ were acetic acids and butyric acids which together composed around $90^{\circ}F$ of total product acids. At higher pH values at $35^{\circ}C$, propionic acid reached around $10\%$. At all experiment conditions, 52 to $55\%$ of generated gases comprised of hydrogen gas and 45 to $48\%$ of carbon dioxide. With temperature increase from 25 to $35^{\circ}C$, the production rate of acetic acid increased 2.9 fold, butyric acid 22 fold, hydrogen gas 2.0 fold and carbon dioxide gas 2.3 fold. Optimum reaction conditions for highest production of acetic acid and hydrogen gas was determined to be pH 5.5 at $35^{\circ}C$.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.4
• /
• pp.499-505
• /
• 2016

To improve the shelf-life of mushrooms, Lentinula edodes GNA01 mushrooms were treated with gel packs containing slow-released chlorine dioxide ($ClO_2$) gas at 5~10 ppm for 5 days at $20^{\circ}C$ and the weight loss rate as well as the changes in pH, color and texture properties of the treated samples were investigated. The weight of the control and $ClO_2$ gas treated samples were decreased slightly, and there were no differences during the storage period. However, the weight of the control changed faster than those of the $ClO_2$ gas treated samples during storage period. The pH in the control and in the $ClO_2$ gas treated samples were decreased during storage period, but the samples treated with 5 and 7 ppm $ClO_2$ gas were the least changed. On the other hand, the samples treated with 10 ppm $ClO_2$ gas showed no difference from the other treatments during 4 days, but the pH was lower than that of the control on the fifth day. The lightness of inside and outside in mushroom were decreased whereas redness and yellowness were increased during storage period. However, color changes in the $ClO_2$ gas treated samples were lower than those of the control. Especially, the samples treated with 5 and 7 ppm $ClO_2$ gas were the least changed. The texture of the mushroom were decreased consistently during storage period. The texture of the control changed faster than those of the $ClO_2$ gas treatments during 5 days. Especially, the samples treated 5 ppm $ClO_2$ gas were the least changed.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.65-75
• /
• 2018

The wind energy produced at night is being discarded because of the excess power generated at night compared to daytime. To solve this problem, In this study, we analyzed the evaluation contents for evaluation of domestic and overseas water electrolysis systems and drew contents for safety performance contents test of the water electrolysis system based on the evaluation contents. The test contents produced the efficiency measurement test, the hydrogen generated pressure test, and the hydrogen purity test. And the safety performance evaluation of the alkaline water electrolysis system of $5Nm^3/hr$ was performed based on the results. As a result, the hydrogen generation was calculated as $5.10Nm^3/hr$ and the stack efficiency was $4.97kWh/Nm^3$. The purity of the hydrogen generated was 99.993% and it was confirmed that it produced high purity hydrogen. I think will help us assess and build safety performance of water electrolysis systems in the future.

• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.54-59
• /
• 2006

A safety device with shut-off function was developed for preventing intentional accidents that might happen by separating of cutting hoses connected to pressure regulators used in residential LP gas facility. For the verification of function and field adaptability, the safety device with shut-off function was tested in the state of joining the device to the regulator and a field test was carried out at home. This study shows that, at the inlet pressure of 0.07-1.56 MPa, the device shuts off the gas within the 5m length of hose regardless of the installation condition of the regulator. The shut-off flow rate increases in the order of perpendicular upward, horizontal and perpendicular downward. From the results of the field tests carried out at home for 5 months, there appears no problem using a gas range or a boiler. If the developed shut-off device is commercialized and distributed in the market the intentional accidents occurred by cutting or separating hoses can be prevented remarkably.