• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1095-1098
• /
• 2004

• 공업화학
• /
• 제21권1호
• /
• pp.29-33
• /
• 2010

본 연구에서는 여러 가지 열처리 온도에서 다성분 도핑에 의한 광촉매의 밴드갭 저감 및 가시광 광분해 효과를 알아보고자 tetraethylammonium tetrafluoroborate (TEATFB)로 B, C, N, F 등이 동시에 도핑된 $TiO_{2}$ 광촉매를 제조하였다. 도핑된 $TiO_{2}$ 광촉매가 가시광선영역에서 분해되는 정도를 확인하기 위해서 태양광에 조사하여 rhodamine B와 acridine orange로 염료분해 실험을 수행하였다. XRD 결과 $800^{\circ}C$ 이하에서 열처리된 $TiO_{2}$ 광촉매는 anatase 구조가 존재하고 있음을 알 수 있었다. XPS 분석을 통하여 광활성에 영향을 미치는 B, C, N, F의 결합구조를 확인하였고 UV-DRS 결과로부터 다성분 도핑된 $TiO_{2}$ 광촉매의 밴드 갭이 2.98 eV로 줄어든 것을 알 수 있었다. 다성분 도핑 $TiO_{2}$의 태양광 조사에 의한 UV-Vis 결과에서 acridine orange에 대한 광분해 효과가 도핑되지 않은 샘플에 비해 1.61배 증가함을 알 수 있었다. 특히, 다성분이 동시 도핑되고 $700^{\circ}C$에서 열처리된 샘플이 acridine orange과 rhodamine B 두 가지 염료 모두에서 가장 좋은 광분해 효과를 보여 주었다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.311-324
• /
• 2018

Herein,the Neodymium ion ($Nd^{3+}$) doped CoAl-LDH have been successfully prepared via co-precipitation method and was used as a precursor of Nd-doped CoAl-mixed metal oxides (MMO). The photocatalytic activity of doped LDH and MMO was investigated in the degradation of an azo dye, C.I. Acid Red 14, under visible light irradiation. DRS and PL analysis demonstrated decreasing in the band gap energy and recombination of photo-induced charge carriers of Nd-doped LDH and MMO compared with the pristine CoAL-LDH. Due to significant difference in photocatalytic performance. A power law empirical kinetic model was obtained for predicting the photocatalytic degradation efficiency.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.92-96
• /
• 2009

A new precursor [$Zr(acac)_{3}(H_{2}O)_{2}$] was synthesized by Sonochemical technique and used to deposit thin $ZrO_{2}$ film on quartz and ceramic substrate via ultrasonic aerosol assisted chemical vapour deposition (UAACVD) at 300 ${^{\circ}C}$ in oxygen environment followed by annealing of the sample for 2-3 minutes at 500 ${^{\circ}C}$ in nitrogen ambient. The molecular structure of the precursor determined by single crystal X-ray analysis revealed that the molecules are linked through intermolecular hydrogen bonds forming pseudo six and eight membered rings. DSC and TGA/FTIR techniques were used to determine thermal behavior and decomposition temperature of the precursor and nature of evolved gas products. The optical measurement of annealed $ZrO_{2}$ film with tetragonal phase shows optical energy band gap of 5.01 eV. The particle size, morphology, surface structure and composition of deposited films were investigated by XRD, SEM and EDX.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1356-1364
• /
• 2014

A new conjugated copolymer, poly{4,8-bis(triisopropylsilylethynyl)benzo[1,2-b:4,5-b']dithiophene-alt-4,7- bis(5-thiophen-2-yl)-5,6-difluoro-2-(heptadecan-9-yl)-2H-benzo[d][1,2,3]triazole} (PTIPSBDT-DFDTBTz), is synthesized by Stille coupling polycondensation. The synthesized polymer has a band gap energy of 1.9 eV, and it absorbs light in the range 300-610 nm. The hole mobility of a solution-processed organic thin-film transistor fabricated using PTIPSBDT-DFDTBTz is $3.8{\times}10^{-3}cm^2V^{-1}s^{-1}$. Bulk heterojunction photovoltaic cells are fabricated, with a conventional device structure of ITO/PEDOT:PSS/polymer:$PC_{71}BM$/Ca/Al ($PC_{71}BM$ = [6,6]-phenyl-$C_{71}$-butyric acid methyl ester); the device shows a power conversion efficiency (PCE) of 2.86% with an open-circuit voltage ($V_{oc}$) of 0.85 V, a short-circuit current density ($J_{sc}$) of 7.60 mA $cm^{-2}$, and a fill factor (FF) of 0.44. Inverted photovoltaic cells with the structure ITO/ethoxylated polyethlyenimine/ polymer:$PC_{71}BM/MoO_3$/Ag are also fabricated; the device exhibits a maximum PCE of 2.92%, with a $V_{oc}$ of 0.89 V, a $J_{sc}$ of 6.81 mA $cm^{-2}$, and an FF of 0.48.

• 공업화학
• /
• 제16권4호
• /
• pp.563-569
• /
• 2005

발전소에서 운영하고 있는 해수전해장치의 전극에 부착물이 다량으로 부착하여 성능이 저하되고 전극 손상사고가 발생하고 있어 전극 부착물을 억제할 수 있는 방안을 연구하였다. 현재 사용하고 있는 grating type의 양극을 plate type으로 변경하고 양극판 수를 9매에서 8매로 줄이는 한편, 전극 간격을 2.4 mm에서 3.0 mm로 늘리고, 극간 간격을 유지하기 위한 스페이서를 27개에서 10개로 줄인 전해조를 개발하였다. 발전소 현장에 개발 전해조를 설치하여 성능을 시험한 결과 기존의 제품에 비하여 전류효율은 15~20% 높았고, 전극 부착물은 36~60% 감소하였으며, 전력소비율은 20% 정도 낮은 것으로 나타났다.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.243-251
• /
• 2023

Developing oxygen evolution reaction (OER) electrocatalysts is essential to accomplish viable CO₂ and water electrolysis. Herein, we report the fabrication and OER performance of Ni-foam (NF)-immobilized Ni₆ nanoclusters (NCs) (Ni₆/NF) prepared by a dip-coating process. The Ni₆/NF electrode exhibited a high current density of 500 mA/cm² for the OER at an overpotential as low as 0.39 V. Ni₆/NF exhibited high durability in an alkaline solution without corrosion. Electrokinetic studies revealed that OER can be easily initiated on Ni6 NC with fast electron-transfer rates. Finally, we demonstrated stable CO₂-to-CO electroreduction using an NC-based zero-gap CO₂ electrolyzer operated at a current density of 100 mA/cm² and a full-cell potential of 2.0 V for 12 h.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1331-1335
• /
• 2011

We report the results of the characterization of Cu oxide thin films deposited by radio frequency (r.f.) magnetron sputtering at different annealing temperatures. The deposited Cu oxide thin films were investigated by scanning electron microscopy, spectroscopic ellipsometry, X-ray diffraction, atomic force microscopy, Xray photoelectron spectroscopy, and contact angle measurements. The thickness of the films was about 180 nm and the monoclinic CuO phase was detected. The $CuO_2$ and $Cu(OH)_2$ phases were grown as amorphous phase and the ratio of the three phases were independent on the annealing temperature. The surface of Cu oxide films changed from hydrophilic to hydrophobic as the annealing temperature increased. This phenomenon is due to the increase of the surface roughness. The direct optical band gap was also obtained and laid in the range between 2.36 and 3.06 eV.

• 공업화학
• /
• 제18권5호
• /
• pp.438-443
• /
• 2007

본 연구에서는 티타늄 산화막을 상온에서 HCP (hollow cathode plasma) 반응기에 의하여 증착하였다. HCP 반응기에 대한 시뮬레이션 결과, 전극에서의 열 발생에 관계없이 기판 표면에서의 온도분포는 일정하였다. 그리고 전극과의 거리가 증가하면서 기판 표면에서의 유체는 일정한 것으로 나타났으며, 표면 조도는 거리에 따라 감소하였다. 출력이 증가할수록 산소의 조성은 증가하는 것으로 나타났으며, 출력이 240 watt와 반응 거리가 3 cm에서 Ti와 O의 비율이 1 : 2에 가깝게 결합이 이루어졌다.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1925-1928
• /
• 2012

Adsorption of alkali metals (Li, Na, and K) on the surface of magnesium oxide nanotubes (MgONTs) with different diameters was investigated using density functional theory. According to the obtained results, the most stable adsorption site was found to be atop the oxygen atom of the tube surface with adsorption energies in the range of -0.25 to -0.74 eV. HOMO-LUMO gap ($E_g$) of the tubes dramatically decreases upon the adsorption of the alkali metals, resulting in enhancement of their electrical conductivity enhancement. The order of $E_g$ decrement caused by the metal adsorption is as follows: K > Na > Li. The results suggest that the MgONTs were transformed from semi-insulator to semiconductor upon the alkali metal adsorption. Increasing the tube diameter, the HOMO/LUMO gap of the pristine tube is enhanced and adsorption energies of the alkali metals are decreased.