• 한국광학회지
• /
• 제33권1호
• /
• pp.11-21
• /
• 2022

본 연구에서는 자율주행차의 라이다 센서용 광위상배열(optical phased array, OPA)에서 우수한 신호 품질을 얻을 수 있는 방법에 대해 조사하였다. OPA를 구성하는 광 안테나가 주기적으로 배치되어 있는 경우에는 grating lobe의 형성으로 인해 빔 조향의 범위가 제한된다. 광 안테나가 비주기적으로 배치된 OPA에서는 한 개의 main lobe만 형성되어 넓은 조향 범위가 가능하지만 side lobe에 의한 잡음의 영향으로 신호 품질이 저하된다. 본 논문에서는 이러한 비주기적인 OPA에서 발생하는 잡음을 최소화하고 신호 품질을 향상시키기 위한 최적화 연구를 수행한 결과를 보고한다. 최적화를 위한 목적 함수로는 side-lobe level (SLL)을 이용하였고, SLL이 가장 낮은 안테나 배열을 구하기 위한 최적화 기법으로는 입자 군집 최적화(particle-swarm optimization, PSO), 유전 알고리즘(genetic algorithm, GA), 패턴 검색 알고리즘(pattern-search algorithm, PSA) 등을 적용하였다. 128 채널의 광 안테나 배치로 이루어진 비주기적 OPA에서 위 3가지 최적화 기법을 적용하여 결과를 비교하였다. 전반적으로 PSO와 GA는 서로 유사한 최적화 결과를 보였고, PSA는 이와는 약간 차별적인 특성을 보였다. 최적화가 이루어진 각도가 45도보다 작을 때에는 최적화 각도가 작을수록 모든 조향 각도에서의 평균적인 SLL 값이 증가하는 경향을 보였지만, 최적화가 이루어진 각도가 45도 이상일 경우에는 최적화 알고리즘에 관계없이 -13 dB 이하의 평균 SLL 값을 얻을 수 있었다. 본 연구를 통해 비주기적인 OPA에서 고품질의 신호를 얻기 위한 최적의 안테나 배열을 구하는 데 있어서 PSO, GA, PSA의 최적화 알고리즘이 유용하게 활용될 수 있음을 보였다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.108-112
• /
• 2010

Design of experiment (DOE) method is employed for a systematic and highly efficient optimization of Ga-doped ZnO thin films synthesized by pulsed laser deposition (PLD) process. We sequentially adopted fractional-factorial design (FD) and central composite design (CCD) of the DOE methods. In fractional-FD stage, significant factors to make conductive electrode are found to target-substrate (T-S) distance and oxygen partial pressure. Moreover, correlation among the process factors is elucidated using surface profile modeling. Electrical properties of the GZO films grown on a glass substrate had been optimized to find that the lowest electrical resistivity of about $1.8'10^{-4}Wcm$ which was acquired with the T-S distance and the oxygen pressure of 4 cm and 7 mTorr, respectively. During the DOE-fueled optimization process, the transparency of the GZO films is ensured higher than 85 %.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.71-73
• /
• 1995

This paper presents an optimization technique using genetic algorithms(GA) for loss minimization in the distribution network reconfiguration. Determining switch position to be opened for loss minimization in the radial distribution system is a discrete optimization problem. GA is appropriate to solve the multivariable optimization problem and it uses population, not a solution. For this reason, GA is attractive to solve this problem. In this paper, we aimed at finding appropriate open sectionalizing switch position using GA, which can lead to minimum transmission losses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.488-490
• /
• 1995

This paper presents an optimization technique using genetic algorithms(GA) for loss minimization in the distribution network reconfiguration. Determining switch position to be opened for loss minimization in the radial distribution system is a discrete optimization problem. GA is appropriate to solve the multivariable optimization problem and it uses population, not a solution. For this reason, GA is attractive to solve this problem. In this paper, we aimed at finding appropriate open sectionalizing switch position using GA, which can lead to minimum transmission losses.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.491-500
• /
• 2016

This paper presents a highly efficient aeroelastic optimization method based on a surrogate model; the model is verified by considering the case of a high-aspect-ratio composite wing. Optimization frameworks using the Kriging model and genetic algorithm (GA), the Kriging model and improved particle swarm optimization (IPSO), and the back propagation neural network model (BP) and IPSO are presented. The feasibility of the method is verified, as the model can improve the optimization efficiency while also satisfying the engineering requirements. Moreover, the effects of the number of design variables and number of constraints on the optimization efficiency and objective function are analysed in detail. The accuracy of two surrogate models in aeroelastic optimization is also compared. The Kriging model is constructed more conveniently, and its predictive accuracy of the aeroelastic responses also satisfies the engineering requirements. According to the case of a high-aspect-ratio composite wing, the GA is better at global optimization.

• 한국지능시스템학회논문지
• /
• 제19권3호
• /
• pp.432-436
• /
• 2009

We have developed a new optimization algorithm termed simple bacteria cooperative optimization (sBCO) based on bacteria behavior patterns [1]. In [1], we have introduced the algorithm with basic operations and showed its feasibility with some function optimization problems. Since the sBCO was the first version with only basic operations, its performance was not so good. In this paper, we adopt a new operation, rank replacement, to the sBCO for improving its performance and compare its results to those of the simple genetic algorithm (sGA) which has been well known and widely used as an optimization algorithm. It was found from the experiments with four function optimization problems that the sBCO with rank replacement was superior to the sGA. This shows that our algorithm can be a good optimization algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.530-537
• /
• 2012

In the recent past, genetic algorithm (GA) and evolutionary optimization scheme have become increasingly popular for the design of electromagnetic (EM) devices. However, the conventional GA suffers from computational drawback and parameter dependency when applied to a computationally expensive problem, such as practical EM optimization design. To overcome these issues, a hybrid optimization scheme using GA in conjunction with Kriging is proposed. The algorithm is validated by using two mathematical problems and by optimizing rotor structure of interior permanent magnet synchronous machine.

• Industrial Engineering and Management Systems
• /
• 제11권3호
• /
• pp.215-223
• /
• 2012

This paper focuses on three very similar evolutionary algorithms: genetic algorithm (GA), particle swarm optimization (PSO), and differential evolution (DE). While GA is more suitable for discrete optimization, PSO and DE are more natural for continuous optimization. The paper first gives a brief introduction to the three EA techniques to highlight the common computational procedures. The general observations on the similarities and differences among the three algorithms based on computational steps are discussed, contrasting the basic performances of algorithms. Summary of relevant literatures is given on job shop, flexible job shop, vehicle routing, location-allocation, and multimode resource constrained project scheduling problems.

• 한국전산유체공학회지
• /
• 제9권1호
• /
• pp.34-40
• /
• 2004

Recently with growth in the capability of super computers and Parallel computers, shape design optimization is becoming easible for real problems. Also, Computational Fluid Dynamics(CFD) techniques have been improved for higher reliability and higher accuracy. In the shape design optimization, analysis solvers and optimization schemes are essential. In this work, the Roe's 2nd-order Upwind TVD scheme and DADI time march with multigrid were used for the flow solution with the Euler equation and FDM(Finite Differenciation Method), GA(Genetic Algorithm) and Kriging were used for the design optimization. Kriging were applied to 2-D airfoil design optimization and compared with FDM and GA's results. When Kriging is applied to the nonlinear problems, satisfactory results were obtained. From the result design optimization by Kriging method appeared as good as other methods.

• 한국건축시공학회지
• /
• 제8권6호
• /
• pp.91-98
• /
• 2008

It is time-consuming and difficulty to solve the time-cost trade-off problems, as there are trade-offs between time and cost to complete the activities in construction projects and this problems do not have unique solutions. Typically, heuristic methods, mathematical models and GA models has been used to solve this problems. As heuristic methods and mathematical models are have weakness in solving the time-cost trade-off problems, GA based model has been studied widely in recent. This paper suggests the time-cost trade-off optimization algorithm using particle swarm optimization. The traditional particle swarm optimization model is modified to generate optimal tradeoffs among construction time and cost efficiently. An application example is analyzed to illustrate the use of the suggested algorithm and demonstrate its capabilities in generating optimal tradeoffs among construction time and cost. Future applications of the model are suggested in the conclusion.