• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.222-227
• /
• 2004

Korean High Speed Train(KHST) has been tested on the high speed test line in Osung site, since it was developed through the G7 Project Plan in 2002. It was also tested on the conventional line such as KyongBu and Honan Line to know the possibility of increasing the limited speed for the high speed trains. This paper introduces the method to improve the speed on the conventional line with body lateral acceleration among the several considered issues and explains the parameters related to those analysis, such as the cant deficiency, the radius of curve, speed and etc. When a train pass on the curved track, the lateral accelerations of body are divided into the quasi-static and the maximum accelerations according to the UIC 518 which is the international specification for testing and approval of railway vehicles from the point of view of their dynamic behaviour, especially for safety and ride comfort. This paper shows that it is safe and comfort from the results of test when KHST runs on the conventional line with the curves and proposes that the limited speed of conventional curved line could be changed to a little higher speed if the analysises of other fields are completed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1959-1962
• /
• 2009

In this paper, we derive the hazard which is a criterion of safety assurance by PHA for the ATP equipped in Korea Tilting Train. The ATP onboard equipment in Korea Tilting Train was introduced as ETCS Level l(which is ETCS specification). Also, the ATP trackside equipment was introduced as a ETCS SRS(System Requirement Specification) 2.2.2 and it has a target for commercial operation in 2009 late. In IEC 62278(EN50126), it recommend of PHA to derive a hazard of target system in concept establishment step and estimate if it can control as a tolerable level and then derive safety case to control the hazard by lifecycle. Therefore, we indicate the hazard using criterion of safety assurance by PHA using FRS (Functional Requirement Specification) 5.0. which is a upper criterion than SRS. The hazard of ATP onboard equipment derived in Korea Tilting Train will be able to use as ATP functional hazards of unified onboard equipment in G7 which is a multiple unit and preliminary hazards of ATP onboard equipment in NEL drived by Korail.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1009-1013
• /
• 2011

Seoul Metro Line 1 to 4 guests per day to 4.5 million people have been using the subway. This is close to the city population, 57 percent of people use the subway and found that 57 percent of people use the subway and found that this is close to the city population. Motor vehicle indoor air quality, especially of the major factors affecting is passenger's clothing, cosmetics, adhesives and formaldehyde by the action and so are able to keep. Enclosure 30ppm formaldehyde during prolonged exposure at concentrations above the nose, bronchial cough and a burning can cause symptoms. It is necessary to introduce an appropriate ventilation system. 1-4 Line Press in 2008, leaving the subway, and normally the train measured in room air quality. Measurements in 2005, $19.3{\sim}83{\mu}g/m^3$, 2008 Year ND ~ $61.7{\mu}g/m^3$ is. When congestion(rush hour) to temporarily increase the formaldehyde can result in a higher number. Automatic detection of formaldehyde and improve ventilation to a practical system, and it is necessary to chatneun. In research since 2006, Removal of formaldehyde were analyzed for the study. the passengers on the effects of formaldehyde in rush hour, the plan for increasing the ventilation through the analysis of various factors, such as electric vehicle practical ways to improve air quality have been studied.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2000년도 추계 학술발표대회 논문집
• /
• pp.82-83
• /
• 2000

G7 고속전철 개발사업의 진행은 고속전철개발 기본 준선 설정의 출발점인 승객에 대한 요구조건들이 간과된 채, 350km/h의ㆍ속도로 주행만을 위한 기술개발로 시작되었다. 그 결과, 승객 910명의 무게 72.8 톤이라는 화물에 대한 운송조건만이 고려되게 되었다. (중략)

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.334-338
• /
• 2004

KTX has started commercial service from Seoul to Busan and Mokpo since April 1, 2004. The service line is composed of new-high speed line and conventional line. Before KTX is runs, the maximum operational speed on conventional line was 140km/h. In order to reduce the traveling time, operation speed of KTX must be increased on the conventional line. So, we performed test running with prototype HSR-350x and verification of safety was made in $10\%$ speed-up. Korean High Speed Train HSR-350x) was developed by G7 - R&D project. In this study, in safety aspect, several technical reviews are introduced and the possibility for reduction of traveling time is investigated on the conventional line by using HSR-350x.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.612-617
• /
• 2006

As the on-board electric devices determine the performances of vehicles, production of reliable devices is important. To keep the reliability of devices constant, management of performance evaluation of the on-board devices is crucial. Because temperature has a serious effect on failures of the components of the devices, its measurement is the first step for good management. In this study, we described performance characteristics of domestic auxiliary block developed through G7 project. We measured the performances of auxiliary block during test running by the developed on-line measurement system. After we save the input real-time data from each signal of Korean High Speed Train through the network line, we can acquire necessary information through post-processing program. We verify the motor block characteristics of Korean High Speed Train by this system.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.924-929
• /
• 2008

The rate of wear of cam followers in a valve train system is mainly a function of contact stress between the cam and the follower, sliding velocity and hydrodynamic film thickness between the two mating surfaces. The wear or surface fatigue can be reduced by maximizing the elastohydrodynamic film thickness. In this paper, an attempt has been made to estimate the optimal specific film thickness of cam-follower system quantitatively. A general TES polynomial function with real values of exponents is developed and genetic algorithm (GA) is used as optimization techniques for maximizing the minimum specific film thickness. The optimization programs enumerate values of the exponents for synthesis of cam displacement curves. The results show that the minimum film thickness can be increased considerably, e.g. approximately 7% in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.392-398
• /
• 2002

In this paper, an engineering database management system(EDMS) has been developed to support the system engineering for design of the high speed titling train to be put into the conventional lines. The developed system can be operated on client-server or web circumstances. To accomplish the concurrent engineering in design of the rolling stocks, this system has been fully equipped with a powerful viewer and a postprocessor for 3D CAD data or FE results. The system was tested using the engineering data produced during carrying out the G7 project to design KHST(Korean High Speed Train) in a crashworthy viewpoint. Through this example, it is shown that the system should be powerfully applied to improving the performance of the system engineering.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.372-379
• /
• 2008

In the case of pantograph, three models of HSR350X(G7), KTX-I and KTX-II have been already introduced into the field of domestic high speed train. This thesis intends to explain performance test result of the conditionally purchasing pantograph that is progressing up to now. The pantograph is being developed to localize pantograph that was applied to KTX-I. Also, it consider criteria that applied for verification of design contents and method of dynamic test that verify pantograph's current collecting performance.

• International Journal of Computer Science & Network Security
• /
• 제23권9호
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.