• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.7
• /
• pp.1003-1008
• /
• 2012

One hundred and twenty weanling pigs in experiment 1 (Exp. 1) ($6.91{\pm}0.99kg$; 21 d of age) and Exp. 2 ($10.20{\pm}1.09kg$; 28 d of age) were used in two 42-d and 35-d experiments to evaluate the effect of medium-chain-triglyceride (MCT) on growth performance, apparent total tract digestibility (ATTD) of nutrients and blood profile. In both of Exp. 1 and Exp. 2, the same dietary treatments were utilized as follows : i) negative control (NC), ii) positive control (PC), NC+antibiotics (40 mg/kg Tiamulin, 110 mg/kg Tylosin, and 10 mg/kg Enramycin, iii) MCT3, NC+0.32% (phase 1, 2 and 3) MCT, and iv) MCT5, NC+0.55% (phase 1), 0.32% (phase 2 and 3) MCT. In Exp. 1, the pigs fed MCT5 diets had higher (p<0.05) ADG compared to NC treatment during the first 2 wk. From d 15 to 28, the ATTD of energy was improved (p<0.05) by MCT3 compared to the PC treatment. No effect has been observed on the blood profiles [red blood cell (RBC), white blood cell (WBC), immunoglobulin-G (IgG), lymphocyte concentration] measured in this study. In Exp. 2, the ADG were increased (p<0.05) by the MCT5 treatment than the PC treatment from d 0 to 14. Pigs fed PC treatment diet had lower ADFI (p<0.05) and better FCR (p<0.05) than NC treatment, whereas no differences were shown between MCT treatments and NC or PC treatment from d 15 to 35 and overall phase. The ATTD of DM and nitrogen were improved (p<0.05) by the effect of MCT5 related to the NC and PC treatment at the end of 2nd and 5th wk. The pigs fed MCT3 had higher (p<0.05) energy digestibility than PC treatment. No effects were seen in the blood profiles we measured (WBC, RBC, lymphocyte and immunoglobulin-G). In conclusion, the addition of MCT in the weanling pigs diet can improve the ADG and digestibility during the earlier period (first 2 wks), but had little effect on the blood characteristics.

• Journal of Powder Materials
• /
• v.14 no.5
• /
• pp.309-314
• /
• 2007

Zirconia powders with nano size pores and high specific surface areas were synthesized via aqueous precipitation and hydrothermal synthetic method using $ZrOCl_28H_2O$ and $NH_4OH$ under pH=11 and ambient condition. By this reaction. zirconia hydrate $(ZrO_x(OH)_{4-2x})$ was primarily synthesized and the obtained zirconia hydrate was heat treated hydrothermally using an autoclave at various temperatures under pH=11. X-ray diffraction, Scanning electron microscopy, Energy dispersive X-ray spectroscopy, FT-IR, Raman, Particle size analysis, DTA-TG, and BET techniques were used for the characterization of the powder. The synthesized zirconia showed an amorphous phase, however, the phase was transformed to the crystalline state during the hydrothermal process. The observed crystalline phase above $160^{\circ}C$ was a mixed phase of monoclinic and tetragonal zirconia. By the BET analysis, it was found that the specific surface area was ranged in $126{\sim}276m^2/g$ and the zirconia had the cylindrical shaped pores with average diameter of $2{\sim}7nm$.

• Resources Recycling
• /
• v.2 no.4
• /
• pp.1-9
• /
• 1993

A study on the recovery of nitric and hydrofluoric acids is carried out with pulsed column extractor in order to the industrial application of this process. Firstly, from the continuous experiments about the recovery of acids using domestic stainelss steel pickling solution, it is found out that the free nitric and hydrofluoric acids are only extracted by 70% TBP and the heaby metals such as Fe, Cr and Ni are not extracted. The effectiveness of extraction and stripping generally improves as the pulse velocity(product of amplitude and frequency) is increased, optimum performance typically occuring slightly below an amplitude-frequency product which results in flooding the column because of excessive emulsification. When the pickling solution is treated by 70% TBP at a phase ratio of A/O=1/2 in the extraction and by distilled water at a phase ratio of O/A=1 in the stripping, the concentration of refined acides are 102g/$\ulcorner$ $HNO_3$and 8.8g/$\ulcorner$ HF, respectively and the recovery of $HNO_3$and HF are 90.7% and 75.2%, respectively.

• Journal of Ginseng Research
• /
• v.39 no.2
• /
• pp.125-134
• /
• 2015

Background: Black ginseng (Ginseng Radix nigra, BG) refers to the ginseng steamed for nine times and fine roots (hairy roots) of that is called fine black ginseng (FBG). It is known that the content of saponin of FBG is higher than that of BG. Therefore, in this study, we examined antitumor effects against MCF-7 breast cancer cells to target the FBG extract and its main component, ginsenoside Rg5 (Rg5). Methods: Action mechanism was determined by MTT assay, cell cycle assay and western blot analysis. Results: The results from MTT assay showed that MCF-7 cell proliferation was inhibited by Rg5 treatment for 24, 48 and 72 h in a dose-dependent manner. Rg5 at different concentrations (0, 25, 50 and $100{\mu}M$), induced cell cycle arrest in G0/G1 phase through regulation of cell cycle-related proteins in MCF-7 cells. As shown in the results from western blot analysis, Rg5 increased expression of p53, $p21^{WAF1/CIP1}$ and $p15^{INK4B}$ and decreased expression of Cyclin D1, Cyclin E2 and CDK4. Expression of apoptosiserelated proteins including Bax, PARP and Cytochrome c was also regulated by Rg5. These results indicate that Rg5 stimulated cell apoptosis and cell cycle arrest at G0/G1 phase via regulation of cell cycle-associated proteins in MCF-7 cells. Conclusion: Rg5 promotes breast cancer cell apoptosis in a multi-path manner with higher potency compared to 20(S)-ginsenoside Rg3 (Rg3) in MCF-7 (HER2/ER+) and MDA-MB-453 (HER2+/ER) human breast cancer cell lines, and this suggests that Rg5 might be an effective natural new material in improving breast cancer.

• Microbiology and Biotechnology Letters
• /
• v.45 no.2
• /
• pp.149-154
• /
• 2017

To increase the efficiency of esterase production by Bacillus, high cell-density culture of recombinant Escherichia coli through fed batch fermentation was tested. Cells were cultured to $OD_{600}$ of 76 (35.8 g/l DCW) with dissolved oxygen level controlled to least above 30% air saturation by supplying pure oxygen. Cells were cultured to an $OD_{600}$ of 90 (42.4 g/l DCW) with glucose feeding controlled to at least 1 g/l. However, the cells reached stationary phase at the late stage of culture, despite glucose being supplied. Cells were cultured to an $OD_{600}$ of 185 (87.3 g/l DCW) by supplying additional medium with fortified yeast extract. To increase the productivity of the recombinant protein, cell growth and esterase productivity based on induction time were evaluated. Late exponential phase induction for esterase production in fed batch fermentation resulted in maximum optical density $OD_{600}$ of 190 (89 g/l DCW) and maximum esterase activity of 1745 U/l, corresponding to a 5.8-fold enhancement in esterase production, compared to the early exponential phase induction. In this study, we established fermentation methods for achieving maximum production of Bacillus-derived esterase by optimizing IPTG induction time in high-cell density culture by supplying pure oxygen and a nitrogen source.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.462-464
• /
• 1994

In this paper, noble electrical equivalent circuit ultrasonic motor is applied by model of parallel one from mechanical equation of piezoelectric device and characteristics estimation is done by equivalent converter. Uitrasonic motor is driven by oscillation circuit of two-phase high frequency inverter. Operating frequency of inverter is described by tracking control method of resonance frequency, according to change of load, temperature etc.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.2
• /
• pp.161-164
• /
• 1991

A rapid and accurate method is described for the determination of nucleo-bases in rumen micro-organisms. A procedure to satisfactorily hydrolyse the micro-organisms involving reaction with a mixture of readily volatile organic acids (acetic and formic acids) under high pressure, is proposed, and optimal conditions for an analytical procedure with reversed phase HPLC is described. The following nucleobases contents (mmol/kg DM) of rumen micro-organisms were found: Adenine (Ade), 82.62; Guanine (Gua), 61.34; Cytosine (Cyt), 84.61; Thymine (Thy), 35.74; Uracil (Ura), 68.62; Hypoxanthine (Hxn), 13.06; Xanthine (Xn), 8.35. Total purine-N content (g/kg N) of rumen micro-organisms were 99.60. The nucleic acid N content (g/kg N) of microbial isolates were: RNA-N, 109.9; DNA-N, 50.9.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.149-149
• /
• 2003

A new technique is proposed for the determination of alkylphenols, chlorophenols and bisphenol A in tap water. The sample preparation consists of a solid phase extraction (SPE) of alkylphenols, chlorophenols and bisphenol A from a water sample with XAD-4 and subsequent conversion to isobutyloxycarbonyl (isoBOC) derivatives or tert.-butyldimethylsilyl (TBDMS) derivatives for sensitive analysis with the GC/MS-SIM mode. The recoveries were 86.6∼105.2 % (isoBOC derivatization) and 97.6∼484.5 % (TBDMS derivatization), respectively. The limit of quantitation of alkylphenols, chlorophenols and bisphenol A for SIM were 0.001∼0.050 $\mu\textrm{g}$/l (isoBOC derivatization) and 0.003∼0.050 $\mu\textrm{g}$/l (TBDMS derivatization). The SIM responses were linear with the correlation coefficient varying 0.9755∼0.9981 (isoBOC derivatization), and 0.9908∼0.9996 (TBDMS derivatization). The derivative methods and their application to tap water samples will be disscussed.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.200-205
• /
• 1997

등방상에서는 폴리파라페닐렌테레프탈아미드(PPD-T)와 히드록시 프로필 셀룰로오 스(HPC)가 비슷한 유변학적 거동을 보였다. 그러나 이방성에서는 네마틱상을 형성하는 PPD-T와 콜레스테릭상(또는 꼬인 네마틱상)을 형성하는 HPC는 상이한 유변학적 특성을 나타냈다. 이방상을 나타내는 임계농도(C*)이상의 농도에서 Herchel-Bulkey 모델에 의해 얻 어진 항복응력을 보면 HPC의 경우 농도에 관계없이 거의 일정한 값을 나타낸 반면PPD-T 의경우에는 농도증가와 더불어 항북응력값이 크게 증가하였다. 또한 PPD-T가 일\ulcorner거으로 HPC보다 큰값의 항복응력을 나타냈다. 진동수 1 rad/s 에서는 PPD-T와 HPCahen 탄성계 수 G＇/2G＂가 농도의 증가와 더불어 증가하엿다. 그러나 100rad/s 에서는 HPCdmlruddn 임계농도이상의 농도에서 농도증가와 더불어 탄성계수값이 단순감소한 반면 PPD-T의 경우 에는 포화농도(B-point)이상의 농도에서 농도증가와 더불어 탄성계수값이 계속적으로 증가 하였다. HPC의 경우 저장탄성률이 변형정도의 영향을 받지 않았으나 PPD-T의 경우에는 저장탄성률이 변형정도에 매우 민감하였다.

• Journal of Magnetics
• /
• v.15 no.4
• /
• pp.179-184
• /
• 2010

We have investigated the effects of post annealing on iron oxide nanoparticles synthesized by the novel hydrothermal synthesis method with the $FeSO_4{\cdot}7H_2O$. To investigate the post annealing effect, the as-synthesized iron oxide nanoparticles were annealed at different temperatures in a vacuum chamber. The morphological, structural and magnetic properties of the iron oxide nanoparticles were investigated with high resolution X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Mossbauer spectroscopy, and vibrating sample magnetometer analysis. According to the XRD and HRTEM analysis results, as-synthesized iron oxide nanoparticles were only magnetite ($Fe_3O_4$) phase with face-centered cubic structure but post annealed iron oxide nanoparticles at $700^{\circ}C$ were mainly magnetite phase with trivial maghemite ($\gamma-Fe_2O_3$) phase which was induced in the post annealing treatment. The crystallinity of the iron oxide nanoparticles is enhanced by the post annealing treatment. The particle size of the as-synthesized iron oxide nanoparticles was about 5 nm and the particle shape was almost spherical. But the particle size of the post annealed iron oxide nanoparticles at $700^{\circ}C$ was around 25 nm and the particle shape was spherical and irregular. The as-synthesized iron oxide nanoparticles showed superparamagnetic behavior, but post annealed iron oxide nanoparticles at $700^{\circ}C$ did not show superparamagnetic behavior due to the increase of particle size by post annealing treatment. The saturation of magnetization of the as-synthesized nanoparticles, post annealed nanoparticles at $500^{\circ}C$, and post annealed nanoparticles at $700^{\circ}C$ was found to be 3.7 emu/g, 6.1 emu/g, and 7.5 emu/g, respectively. The much smaller saturation magnetization value than one of bulk magnetite can be attributed to spin disorder and/or spin canting, spin pinning at the nanoparticle surface.