• Toxicological Research
• /
• v.20 no.2
• /
• pp.153-158
• /
• 2004

To evaluate the genotoxicity of CJ-11555, an anti-cirrhotic agent, the reverse mutation test, chromosomal aberration test and in vivo micronucleus test in rats were performed. In the reverse mutation test, the treatment of CJ-11555 at doses of 33.3, 100, 333, 1000, 3330 and 5000 $\mu\textrm{g}$/plate with and without 89 did not induce mutagenicity in Salmonella typhimurium TA98, TA100, TA1535, TA1537, and Escherichia coli (E. call) WP2uvrA. In chromosomal aberration test, CJ-11555 did not induce structural a chromosomal aberration in Chinese hamster ovary (CHO) cells with and without metabolic activation at all doses. In micronucleus test, CJ-11555 did not induce any statistically significant increases in micronucleated polychromatic erythrocyte (MNPCE) at doses of 500, 1000, and 2000 mg/kg. These results suggest that CJ-11555 might not have a mutagenic potential under the conditions in this study.

• Nuclear Engineering and Technology
• /
• v.45 no.3
• /
• pp.335-346
• /
• 2013

The Critical Heat Flux (CHF) of water with dispersed alumina nanoparticles was measured for the geometry and flow conditions relevant to the In-Vessel Retention (IVR) situation which can occur during core melting sequences in certain advanced Light Water Reactors (LWRs). CHF measurements were conducted in a flow boiling loop featuring a test section designed to be thermal-hydraulically similar to the vessel/insulation gap in the Westinghouse AP1000 plant. The effects of orientation angle, pressure, mass flux, fluid type, boiling time, surface material, and surface state were investigated. Results for water-based nanofluids with alumina nanoparticles (0.001% by volume) on stainless steel surface indicate an average 70% CHF enhancement with a range of 17% to 108% depending on the specific flow conditions expected for IVR. Experiments also indicate that only about thirty minutes of boiling time (which drives nanoparticle deposition) are needed to obtain substantial CHF enhancement with nanofluids.

• Journal of Environmental Health Sciences
• /
• v.22 no.1
• /
• pp.28-35
• /
• 1996

In order to investigate the contents of total mercury in zoo animal located near in Seoul, we measured the contents of total mercury in fur and feather collected in zoo animal by the Mercury Analyzer. The contents of total mercury in mammals was $61.56\pm 20.32 \mu g/kg$, but in birds $659.49\pm 162.73 \mu g/kg$. Compared with feeding pattern, the contents of total mercury of omniverous and carniverous were detected higher than those of herbiverous in mammals, and also same as in birds. The contents of total mercury of Cuculidae and Ciconidae were detected highestly among classification of family in zoo animal, but those of Camelidae and Cervidae were detected lowestly. Of carniverous, 30.5% was higher than $1000 \mu g/kg$, but the ratio of omniverous detected less than $100 \mu g/kg$ was 45.5%, and in herbiverous 95.4%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.719-724
• /
• 1994

This paper describes a hybrid surface-based method for smooth 3D surface approximation to a sequence of 2D cross sections. The resulting surface is a hybrid G $^{1}$ surface represented by a mesh of triangular and rectangular Bezier patches defined on skinning, branching, or capping regions. Each skinning region is approximated with a closed B_spline surface, which is transformed into a mesh of Bezier patches. Triangular G $^{1}$ surfaces are constructed over brabching and capping regions such that the transitions between each capping regions such that the transitions between each triangular surface and its neighboring skinning surfaces are G $^{1}$ continuous. Since each skinning region is represented by an approximated rectangular C $^{2}$ suface instead of an interpolated trctangular G $^{[-1000]}$ surface, the proposed method can provide more smooth surfaces and realize more efficient data reduction than triangular surfacebased method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.764-769
• /
• 2010

We investigated influence of continious application of gypsum (G: $CaSO_4{\cdot}2H_2O$), popped rice hulls (H) and zeolite (Z) on soil aggregation of reclaimed sandy loam soils. The application rates amended to fine sandy loam from reclaimed soils at Kyehwado were varied as follows:1550 (G1), 3100 (G2), 6200 (G3), 1000 (H1), 2000 (H2), 3000 (H3), and 200 (HZ1), 400 (HZ2) and 800 (HZ3) added to 1500(H) kg $10a^{-1}$, respectively. Soil aggregates were analyzed for 60, 90 and 120 days after treatments (DAT). At 60 DAT, The amount of aggregate from soil samples treated with gypsum was slightly increased with G1 while the aggregation was decreased by 4.66% for G3 for soil aggregates than thar of control. The treatments of H or HZ were effective in soil aggregation. The effect of treatment was in the order of H > HZ > G. At 90 DAT, increasing amount of gypsum attributed to decrease in soil aggregates. Therefore, we could conclude that suitable amounts of gypsum for soil aggregation in fine sandy loam might be 1550 kg $10a^{-1}$ or less. H1 increased aggregation by 7% for aggregate size between 1.0 and 2.0 mm. HZ1 was most effective in aggregation by 52.78% among the treatments while H2 and HZ3 51.50% and 48.51% at 120 DAT, respectively. As a result, we found that the effect of the treatment for soil amendments was in order of H > HZ > G.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.823-830
• /
• 1999

The suppressing effects of crude extracts of three Korean teas, persimmon leaf tea extract (PLTE), green tea extract (GTE) and oolong tea extract (OTE), were studied on the induction of sister chromatid exchange (SCE) in cultured Chinese hamster ovary cells. When cells were treated with tea extract after mitomycin C (MMC) treatment, the frequency of MMC-induced SCEs were decreased at the high concentration $(1000\;{\mu}g/mL)$ of PLTE in the presence of S9 mix and at low concentrations $(20{\sim}80\;{\mu}g/mL)$ of PLTE in the absence of S9 mix, Whereas GTE and OTE showed suppressing effects on the MMC-induced SCEs at low concentrations $(10{\sim}20\;{\mu}g/mL)$ for OTE and $160\;{\mu}g/mL$ for GTE only in the presence of S9 mix. MMC-induced SCEs were decreased by post-treatment with each tea extracts with S9 mix in the G1 phase of the cell cycle. These results suggest that PLTE, GTE and OTE could have bio antimutagenic activities, and also suggest that PLTE might have unknown antimutagenic components which would be responsible for the inhibitory effect against direct acting mutagenicity.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.173-179
• /
• 2010

In this study, we determine the stretch and shrinkage properties of conjugated yarns. The shrinkage(%) and elasticity(%) were determined by applying twist conditions of 0, 350, 800, 1000, 1200, 1400, 1600, 2000 T/M (twisting per meter). It is found that the shrinkage(%) and elasticity(%) gradually decreased with increasing T/M. Especially the elasticity(%) dramatically decreased over 1400 T/M condition. In contrast, it is showed that the handle and drapery properties decreased below 1000 T/M, which indicates that the optimal T/M condition could be 1000~1400. The effect of shrinkage(%) and elasticity(%) with different steam setting temperatures (60, 70, 80 and $90^{\circ}C$) was also determined. The shrinkage(%) decreased with increasing setting temperature, while the elasticity not changed. In this context, the optimal steam setting temperature could be $80^{\circ}C$ because it is not easy to weave with the yarns which was set below $80^{\circ}C$. The elasticity(%) decreased with increasing the density of warp and weft. To produce soft handle, excellent drapery and good stretch fabrics, the warp density needs to be reached by 90% of the ideal warp density. In the case of NaOH treatments to the fabrics, the elasticity(%) increased with increasing weight reduction. Therefore, this study have demonstrated that the conjugated yarns with core yarn and the SDY CD(cation dyeable spindraw yarn) as an effect yarn would be appropriate to produce excellent mixture-yarn, which displays clean appearance, good handle and excellent elasticity, The optimized conditions are as follows; 1000~1200 twist per meter, $80^{\circ}C$ steam setting temperature, 90% of ideal warp density and relaxation condition treated with 5g/l NaOH concentration.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2544-2546
• /
• 1998

The electrical and physical charateristics of Pt-Co alloy thin films on $Al_2O_3$ substrate, deposited by r.f cosputtering respectively, were analyzed with thickness of thin films ($1700{\sim}10000{\AA}$) and increasing annealing temperature ($800{\sim}1000^{\circ}C$). At input power of Pt : 4.4 W/$cm^2$, Co : 6.91 W/$cm^2$, working vacuum of 10 mTorr and annealing conditions of $1000^{\circ}C$) and 60 min, the resistivity and sheet resistivity of Pt-Co thin films with thickness of $3000{\AA}$ was $15{\mu}{\Omega}{\cdot}cm$ and 0.5 ${\Omega}/{\square}$, respectively. The TCR value of Pt-Co alloy thin films was measured with various thickness of thin films and annealing conditions. The optimum TCR value of 3850 ppm/$^{\circ}C$ in temperature range($200{\sim}400^{\circ}C$) is gained under conditions $3000{\AA}$ of thin films thickness and $1000^{\circ}C$ of annealing temperature. The thermal charateristics of Pt-Co micro heaters were analysed with Pt-Co RTD integrated on the same substrate. In the analysis of characteristics of Pt-Co micro heaters, the Pt-Co micro heaters with thickness of $3000{\AA}$ and annealing temperature of $1000^{\circ}C$ had a good linearity and temperature is up to $468.2^{\circ}C$ with 2.1 watts of the heating power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1049-1056
• /
• 2010

Recently RFID system has been adopted in various fields rapidly. However, we should solve the problem of privacy invasion that can be occurred by obtaining information of RFID Tag without any permission for popularization of RFID system. To solve these problems, There is the Ohkubo et al.'s Hash-Chain Scheme which is the safest method. However, this method has a problem that requesting lots of computing process because of creasing numbers of Tag. Therefore We, suggest SP-Division algorithm satisfied with all necessary security of Privacy Protection Scheme and decreased in Tag Identification Time in this paper. And this paper implemented it in time standard finding the first key among the data devided into each nodes. The length of Hash-Chain holds 1000, and the total number of SPs increases 1000, 2000, 3000, and 4000. Comparing tag identification time by the total number of SPs and the number of Nodes with single node, extending the number of nodes to 1, 2, 3 and 4, when the number of nodes is 2, 40% of Performance, when the number of nodes is 3, 56%, and when the number of nodes is 4, 71% is improved.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.759-768
• /
• 2005

The study was designed to estimate the in vitro rumen by-pass rate of both chromium methionine chelate as an organic supplement and $ClCl_3$ as an inorganic supplement. Rumen by-pass rates of the supplements were evaluted by comparing ruminal metabolites in rumen fluid and Cr and methionine contents in the body of ruminal microorganism. For in vitro digestion examination, basic nutrients for ruminal microbes were supplied with 7g(DM) of feed, 2g of rice straw, and 2g of corn silage per each incubation jar. Three treatments including Control(no supplementation of Cr), T1(1000ppb supplementation of $ClCl_3$) and T2(chromium methionine chelate supplementation equivalent to 1000ppb of Cr content) were prepared with five replications per each treatment. pH of T2 was lower than that of Control and T1 regardless of incubation time. Ammonia content was higher in T2 than in Control and T1 during first 6 hours of incubation. However, the ammonia content in Control was remained low after 6 hours. Total volatile fatty acids(VFA) content in control was increased constantly as incubation time was extended. Therefore, VFA content in T1 and T2 were significantly lower (P<0.05) than those of Control. Dry matter recovery rate by ruminal microorganism was the lowest in T1, however ruminal microbial population was increased most efficiently in T2 during 12 hours of in vitro incubation. Cr concentrations in the body of ruminal microbes were not different(P>0.05) between Control and T2, but it was significantly high in T1(P<0.05). Contents of methionine and cystine in ruminal microbes also were not different between Control and T2(P>0.05), but it was relatively low in T1. Based on the above results, the chromium methionine chelate was believed to by-pass rumen and could remain intact until it reaches small intestine compared to inorganic chromium. This results implies that chromium methionine chelate could be more effective to function in the small intestine of ruminant animals.